Instruction/ maintenance manual of the product IPL T PC1 Extron electronic
Go to page of 27
© 2007 Extron Electronics. All rights reserved. Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.
Pr ecautions This symbol is intended to alert the user of important opera ting and ma intenanc e (servici ng) instr uctions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压，有触电危险。 .
i IPL T PC1 • T able of Contents T able of Contents Chapter One • Introduction ................................................... 1-1 About this Manual .................................................................... 1-2 About the IPL T PC1 .
ii IPL T PC1 • T able of Contents T able of Contents, cont’d IPL T PC1 1 Chapter One Intr oduction About this Manual About the IPL T PC1 About Global Configurator Building and Uploading a GC File ...................................... 3-23 Step T welve: Build the Global Configurator file.
IPL T PC1 • Introduction Intr oduction IPL T PC1 • Introduction 1-3 1-2 About this Manual This setup guide describes the following: The IPL T PC1/PC1i products The Global Configurator application.
IPL T PC1 • Introduction Introduction, cont’d 1-4 IPL T PC1 • Introduction 1-5 Using GC2.3, you can configure a single r oom controller or create a web-based r emote monitoring system for hundreds of A/V devices in multiple locations. Y ou may configur e an IPL T PC1 interface using GC2.
IPL T PC1 • Introduction Introduction, cont’d 1-6 IPL T PC1 2 Chapter T wo Har dware Setup Front Panel Rear Panel Connecting the Hardware This page was intentionally left blank.
IPL T PC1 Interface • Hardwar e Setup Har dware Setup IPL T PC1 Interface • Hardwar e Setup 2-2 2-3 Front Panel The front panel has a r ecessed Reset button, a Power button (for the output recepta.
IPL T PC1 Interface • Hardwar e Setup Hardwar e Setup, cont’d 2-4 IPL T PC1 Interface • Hardwar e Setup 2-5 d LAN connector and LEDs — An Ethernet connection can be used on an ongoing basis to monitor and control the PC1 (and the output device connected to it).
IPL T PC1 Interface • Hardwar e Setup Hardwar e Setup, cont’d 2-6 IPL T PC1 Interface • Hardwar e Setup 2-7 RS-232 port cabling T o connect an output device, such as a plasma display or projector , to the PC1's RS-232 connector , see the Extron IP Link Device Interface Communication Sheet for your display device.
IPL T PC1 Interface • Hardwar e Setup Hardwar e Setup, cont’d 2-8 IPL T PC1 3 Chapter Thr ee Softwar e Setup Creating a Global Configurator Project File Building and Uploading a GC File Launching.
IPL T PC1 Interface • Software Setup Softwar e Setup IPL T PC1 Interface • Software Setup 3-2 3-3 Creating a Global Configurator Pr oject File After you have installed the Global Configurator (G.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-4 IPL T PC1 Interface • Software Setup 3-5 Step T wo: Create a new pr oject. T o cr eate a new Global Configurator project file, 1 . From the File menu, select New . The Start Options dialog box opens.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-6 IPL T PC1 Interface • Software Setup 3-7 Step Three: Add a device. There ar e four ways to launch the Add Device dialog box: • Press Ctrl+A on the computer keyboard. • Select Add Device.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-8 IPL T PC1 Interface • Software Setup 3-9 Step Four: Define the location of the new device. Global Configurator allows you to keep track of the devices on your audio/video network by creating a custom tr ee of folders in which you can place and organize your audio/video devices.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-10 IPL T PC1 Interface • Software Setup 3-11 Step Six: Enter contacts. The Contact Manager dialog box is used to enter the name, e-mail address, and company name of the network’s contacts.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-12 IPL T PC1 Interface • Software Setup 3-13 4 . Repeat steps 2 and 3 to create additional e-mail messages as needed. 5 . When finished adding e-mail messages, click Done . Step Eight: Enter output receptacle and contact input port labels.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-14 IPL T PC1 Interface • Software Setup 3-15 5 . Create a gr oup folder for your output device functions: a . Click the Add folder icon ( ) above the GlobalV iewer ® W eb Group(s) section.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-16 IPL T PC1 Interface • Software Setup 3-17 Step T en: Set scheduled actions and e-mail deliveries. The Schedule tab is used to set scheduled actions and to create and schedule delivery of e-mail messages.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-18 IPL T PC1 Interface • Software Setup 3-19 Scheduling e-mail delivery T o schedule an e-mail message delivery , 1 . Select the Schedule tab. 2 . Click the Add Schedule button. The Scheduled Actions W izard dialog box opens.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-20 IPL T PC1 Interface • Software Setup 3-21 Step Eleven: Set monitored conditions. The Mo n i to r tab is used to set up a response (action and/or e-mail) to a specified condition or event.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-22 IPL T PC1 Interface • Software Setup 3-23 1 1. If desired, follow steps 5 through 10 to add mor e conditions. Y ou can select either a port name or the device name and IP addr ess in the Subject Port field.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-24 IPL T PC1 Interface • Software Setup 3-25 Step Thirteen: Upload the Global Configurator file. When the build process completes, the Upload dialog box opens. 1 . Click the Begin button.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-26 IPL T PC1 Interface • Software Setup 3-27 Launching the GlobalViewer Interface GlobalV iewer is a graphical user interface that is generated by Global Configurator (GC).
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-28 IPL T PC1 Interface • Software Setup 3-29 This page was intentionally left blank.
IPL T PC1 Interface • Software Setup Software Setup, cont’d 3-30 This page was intentionally left blank..
An important point after buying a device Extron electronic IPL T PC1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic IPL T PC1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic IPL T PC1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic IPL T PC1 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic IPL T PC1 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic IPL T PC1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic IPL T PC1.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic IPL T PC1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic IPL T PC1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
