Instruction/ maintenance manual of the product CVC 200 Extron electronic
Go to page of 4
Installation Guide Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.33.453.4040 FAX +31.33.
The CVC 200 Component V ideo Converter converts all SMPTE standard component video formats to RGBS or RGBHV video. The CVC 200 can also strip sync-on-green (SOG) fr om RGsB video. The converter outputs converted RGBS or RGBHV video on BNC connectors. Figure 1 shows a typical CVC 200 application.
Cable Connection and Rate Selection (Cont’d) Cable Connection and Rate Selection CVC 200 • Cable Connection and Rate Selection 3 CVC 200 • Rate Selection 4 Cable Connection and Rate Selection See figure 3 to identify the r ear panel connections and Format rotary switch OUTPUT R G B S H V P R /R P B /B Y/G INPUT FORMAT LISTED 1T23 I.
Specifications (Cont’d) Specifications CVC 200 • Specifications 5 CVC 200 • Specifications 6 Specifications Video Gain ................................................ Unity Bandwidth ..................................... 55 MHz (-3 dB) Video input Number/signal type .
An important point after buying a device Extron electronic CVC 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic CVC 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic CVC 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic CVC 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic CVC 200 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic CVC 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic CVC 200.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic CVC 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic CVC 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
