Instruction/ maintenance manual of the product 325 Extron electronic
Go to page of 4
1 VNM Enterprise Contr oller • Setup Guide The Extron VNM Enterprise Controller is a dedicated control device used to manage large VN-Matrix systems. The VNM Enterprise Controller allows users to view , manage, and dynamically control multiple VN-Matrix systems and networked VN-Matrix domains from a single user interface.
2 VNM Enterprise Contr oller • Setup Guide (Continued) a. Configure the network settings of a control PC so that it is using an IP address within 192.168.254.1 to 192.168.254.253 and a subnet mask of 255.255.255.0. Connect the control PC to the VN-Matrix network.
3 3 h. Refresh the browser to activate and view the changes. i. Click the Configuration tab. The Configuration page appears (if login is required, follow steps 5b through 5e). j. From the Configuration page, click the Role link (see figure 6). k. From the Device Mode drop-down menu, select singleton .
4 VNM Enterprise Contr oller • Setup Guide (Continued) Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - West Extron USA - East +1.714.491.1500 +1.919.863.1794 +1.714.491.1517 FAX +1.919.863.1797 FAX Extron Europe +800.3987.6673 (Inside Europe Only) +31.
An important point after buying a device Extron electronic 325 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic 325 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic 325 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic 325 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic 325 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic 325, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic 325.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic 325. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic 325 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
