Instruction/ maintenance manual of the product 200 Extron electronic
Go to page of 18
User Guide Cable Cubby ® 200 Architectur al Connectivity Cable Access Enclosur e 68-1557-01 Rev . A 10 12.
Safety Instructions • English W ARNING : This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated danger ous voltage within the product’ s enclosure that may pr esent a risk of electric shock.
Conventions Used in this Guide The following notifications are used: CAUTION: A caution indicates a situation that may result in minor injury . A TTENTION: Attention indicates a situation that may damage or destroy the pr oduct or associated equipment.
.
v Cable Cubby 200 • Contents Contents Introduction ............................................................ 1 Overview ............................................................ 1 Cable Cubby 200 Features ................................ 1 Kit Contents .
Cable Cubby 200 • Introduction 1 Intr oduction Overview The Extron Cable Cubby 200 is a furniture-mounted, ar chitectural solution that provides inconspicuous cable access and connection points. When cables are not in use, they can be stored out of the way while r emaining connected to the presentation system.
Cable Cubby 200 • Kit Contents 2 Kit Contents Included Parts Image Part Quantity Cable Cubby 200 enclosure 1 Cable pass-through AAPs 2 Cable stand-offs 4 Mounting screws (6-32 x 3/4 inch) 4 Grommet .
Cable Cubby 200 • Before Getting Started 3 Befor e Getting Started This section describes important information about the Cable Cubby 200 and planning considerations for installation.
Cable Cubby 200 • Before Getting Started 4 Planning Determine the best location for the enclosure. Befor e making any cuts : • Ensure that the location wher e the Cable Cubby is to be installed is convenient for as many users as possible. • Ensure that the edge on which the lid opens is oriented corr ectly .
Cable Cubby 200 • Installation 5 Installation This section provides information for an experienced installer to set up and install the Cable Cubby 200. Before starting, decide wher e to install the Cable Cubby , verify that all included parts are accounted for , and gather the necessary equipment for installation.
Cable Cubby 200 • Installation 6 1. Prepar e the Routing T emplate NOTE: Save and reuse the metal r outing template for installing additional Cable Cubby 200 models. a. Cut 1/2 inch x 4 inch strips of soft, finished lumber to a length that is long enough to span the edges of the mounting surface.
Cable Cubby 200 • Installation 7 1. Plan for AAPs TIP: T ypical installations consist of a VGA (large hole), an audio (small hole), and a network (medium hole) cable. In a non-standard installation, match the diameter of the cable to the size of the hole that best applies.
Cable Cubby 200 • Installation 8 3. Install Any Necessary Split Grommets and Hole Plugs a. Slip the appropriate split grommet over each cable with the flange of the grommet towar d the connector that will be accessible inside the Cable Cubby . Snap the grommets into the channels.
Cable Cubby 200 • Installation 9 Secu re cables w/ zip ties to holes in r ear of Cable Cubby . Power Co rd Connect to AV Device or System 1. T est the Fit a. Remove the plastic strips on finished surfaces of the Cable Cubby . A TTENTION: Potential damage to property .
Cable Cubby 200 • Reference Information 10 Refer ence Information This section provides part numbers for the Cable Cubby 200 and r elated products. Visit the Extron website, www .
Cable Cubby 200 • Reference Information 11 Cable Pass-through AAPs (see figur e 2 ) Part Numbers Cable pass-through (right) 70-267-01 Cable pass-through (left) 70-270-01 Grommet and Plug Kit Part Nu.
Cable Cubby 200 • Reference Information 12 T op Plate Dimensions If you choose not to use the Extron metal r outing template, the paper cut-out template will help you properly pr epare the mounting surface (see figur e 4 ). The cutout template is not to scale and is for refer ence only .
Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - W est Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 F AX +1.919.850.1001 F AX Extron Europe +800.3987.6673 (Inside Europe Only) +31.33.453.4040 +31.33.453.4050 F AX Extron Asia +800.
An important point after buying a device Extron electronic 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic 200 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic 200.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
