Instruction/ maintenance manual of the product Sentriant AG200 Extreme Networks
Go to page of 40
Extreme Networks, Inc. 3585 Monroe Street Santa Clara, California 9505 1 (888) 257-30 00 (408) 579-28 00 http://www . extremenetworks.com Sentriant AG200 Hardware Installation Guide Published: June 2008 Part number: 100317-00 Rev .
Sentriant AG20 0 Hardware Insta llation Guide 2 AccessAdapt, Alpine, Alti tude, BlackDiamond, EPICente r , ESRP , Ethernet Everywhere, Extreme Enabled, Extreme Ethernet Everywhere, E xtreme Networks, .
Sentriant AG200 Ha rdware Installation Gui de 3 Contents Preface............................................................... ........................................... ............................... .. 5 About this Guide .........................
Contents Sentriant AG20 0 Hardware Insta llation Guide 4 Appendix B: Techn ical Specifications ........ .......................................... ......................................... .3 5 Index ............................................. .....
Sentriant AG200 Ha rdware Installation Gui de 5 Preface This preface pr ovides an overview of this guide, describes guide conventions, and lists other publications that might b e useful. About this Guide This guide describes how to install the Se ntriant AG200 appliance in an equipment rack.
Preface Sentriant AG20 0 Hardware Insta llation Guide 6 Related Publications For more information about configuring and using th e Sentriant A G appliance, refer to the following publications: ● Sentriant AG Software Insta llation Guide, V ersion 5.
Sentriant AG200 Ha rdware Installation Gui de 7 1 About the Sentriant AG200 Appliance This chapter includes the foll owing sections: ● “Chassis Overview” on page 7 ● “Front P anel Featur es.
About the Sentria nt AG200 Appliance Sentriant AG20 0 Hardware Insta llation Guide 8 Back Panel Features Figure 2 shows the back panel of the Sentriant AG appliance.
Sentriant AG200 Ha rdware Installation Gui de 9 LCD Panel The LCD panel on the Sentriant AG appliance provid es identifying information for the appl iance and information about the basic system hea lth .
About the Sentria nt AG200 Appliance Sentriant AG20 0 Hardware Insta llation Guide 10.
Sentriant AG200 Ha rdware Installation Gui de 11 2 Site Preparation and Unpacking This chapter includes the foll owing sections: ● “Site Requirements for the Sentriant AG Appliance” on page 1 1 .
Site Preparation and Unpacking Sentriant AG20 0 Hardware Insta llation Guide 12 Unpacking the Sent riant AG Appliance When you unpack the Sentriant AG appliance, veri fy that y ou have received the fo.
Sentriant AG200 Ha rdware Installation Gui de 13 3 Installing the Sentriant AG200 Appliance This chapter includes the foll owing sections: ● Overview on page 13 ● Required T ools and Equipment on .
Installing the Sentria nt AG200 Appliance Sentriant AG20 0 Hardware Insta llation Guide 14 3 Repeat these steps to at tach the othe r bracket to the opposite side of the Sentriant AG appliance.
Sentriant AG200 Ha rdware Installation Gui de 15 Connecting Power Connect the AC power cable from the power connector o n t h e b a c k o f t h e S e n t r i a n t A G a p p l i a n c e t o a n active power outlet. T o power on the Sentriant AG appliance, pr ess the power switch to the On posi tion.
Installing the Sentria nt AG200 Appliance Sentriant AG20 0 Hardware Insta llation Guide 16.
Sentriant AG200 Ha rdware Installation Gui de 17 4 Startup and Configuration The Sentriant AG200 appliance is shipped with the la test software installed.
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 18 5 Select Ye s to save the changes or No to discard the change s. A confirmation message is displayed for either action. If you save the changes, you must r eboot the system for the changes to take ef fect.
Sentriant AG200 Ha rdware Installation Gui de 19 3 Edit the IP addr ess, Netmask, Default Gateway , Hostname, and DNS Server fields. 4 Select OK and save the changes. Setting the T ime, Date, and T ime Zone T o set t he time, date, and time zone: 1 From the main configuration menu, highligh t Adjust time, date, timezone , and select OK .
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 20 b Change the date and select OK . c Change the time and select OK . 4 Confirm the change and save the changes. 5 Select OK to return to the time/date/timezone menu. 6 T o change t he time zone: a Highlight Change your timezone and select OK .
Sentriant AG200 Ha rdware Installation Gui de 21 b Scroll down to highlight the appr opriate timezo ne and pres s [Enter] to select the highlighted timezone. Then tab to OK and press [Enter]. c Confirm the change and save the changes. d Select OK to return to the time/date/timezone menu.
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 22 Setting the Operation Mode of the Server T o set the o peration mode (p ersonality) of the server: 1 From the main menu, highlight Set personality of the Sentriant AG . A warning message is d isplayed.
Sentriant AG200 Ha rdware Installation Gui de 23 Initial Configuration NOTE If endpoints are already attached to a switch when you in stall Sentriant AG, you must log in to each switch and send the NAC revalidate command before the e ndpoint can be tested and routed properly .
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 24 4 Respond to the Accept license agr eement window in one of the f ollowing ways: ● If you do not wish to accept the license agr eement, select I do not accept this license agreement .
Sentriant AG200 Ha rdware Installation Gui de 25 8 If you use a proxy server , select Use a proxy server for Internet connections . (Connecting to the Internet is necessary for updating tests, validating license key s , and sending support packages.
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 26 CAUTION If you use a proxy server , your license key will not validate from this wind ow unless you have performed step 8 on page 25. 11 Enter a User name and Password for the initial Sentriant AG administ rator account.
Sentriant AG200 Ha rdware Installation Gui de 27 3 Use the arrow keys to highlight Integrated Periph erals , and pr ess [Enter}. 4 Select Onboard Devices .
Startup and Configuration Sentriant AG20 0 Hardware Insta llation Guide 28 5 Select Lan 1/2 pow er on bypa ss and select Enabled . Select PWR On/Off Lan Bypass C trl and select Enabled .
Sentriant AG200 Ha rdware Installation Gui de 29 A Safety Information WAR NI NG ! Read the following safety information th oroughly before installing Extreme Netw orks products. Failure to follow this safety information can lead to personal injury or damage to the equipment.
Safety Infor mation Sentriant AG20 0 Hardware Insta llation Guide 30 WAR NI NG ! Provided with this product is a detachable power supply cord with IE C320 style termination s for use in the US. Before making the connection, make sure the voltage rati ng of the product equals or exceeds the voltage and amperage rating of the power source.
Sentriant AG200 Ha rdware Installation Gui de 31 Battery Replacement and Disposal The lithium battery in this equipmen t is not user-replaceable. It must be replaced by qualified Extr eme Service personnel only . Contact your Extreme Service pers onnel for pr oduct re placement.
Safety Infor mation Sentriant AG20 0 Hardware Insta llation Guide 32 Sicherheitshinweise WARNU NG! V or der Installation der Produkte von Extreme Networks sind die nachfolgenden Sicher heitshinweise aufmerksam zu lesen. Die Nichtbeachtung dieser Sich erheitshinweise kann zu V erletzungen od er Schäden an der Ausrüstung führen.
Sentriant AG200 Ha rdware Installation Gui de 33 W a rnhinweise ● Das System an vorschriftsmäßig gee rdete Stec kd osen anschließen, um die Gefahr elektrischer Schläge zu vermeiden. Di e Steckdose muss in de r Nähe der Anlage instal liert und leicht zugä nglich sein, um eine schnelle T rennung vom Netz zu ermöglichen.
Safety Infor mation Sentriant AG20 0 Hardware Insta llation Guide 34 ● V erlegen von Kabeln: Kabel so verlegen, dass kein e Schäden entstehen oder Unfälle, z.
Sentriant AG200 Ha rdware Installation Gui de 35 B T echnical Specifications Ta b l e 4 provides technical specif ications for the Sentriant AG2 00 appliance. T able 4: Sentriant AG Applia nce T echnical Specifications Physical Specifications Chassis dime nsions Height: 1.
Technical Specific ations Sentriant AG20 0 Hardware Insta llation Guide 36 Europe an EMC f or ITE 89/336/EEC EMC Directive EN 55022:19 98 A2:2003 Cl ass A EN55024:199 8 A2:2003 includes IEC/EN6 1000-2,3,4 ,5,6,11 EN61000-3-2: 2000 Class A (Harmon ics) EN61000-3-3:1995 A1:2001 (Flicker) ETSI/EN 300 386 :v1.
Sentriant AG200 Ha rdware Installation Gui de 37 Storage and transportation conditions (packaged) Temperature*: –40º C to +70º C (–40º F to 158º F) Relative humidity*: 10–93% RH Shock*: 180 m/s 2 (18g), 6ms600 shocks (package < 50 kg) Random vibration*: 5–20 Hz @ 1.
Technical Specific ations Sentriant AG20 0 Hardware Insta llation Guide 38.
Sentriant AG200 Ha rdware Installation Gui de 39 Index A ambient temp erature, 11 B battery disposal requirement, 31 C cable routing, 30 connecting power, 15 conventions notice icons, 5 text, 6 D dime.
Index Sentriant AG20 0 Hardware Insta llation Guide 40.
An important point after buying a device Extreme Networks Sentriant AG200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extreme Networks Sentriant AG200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extreme Networks Sentriant AG200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extreme Networks Sentriant AG200 you will learn all the available features of the product, as well as information on its operation. The information that you get Extreme Networks Sentriant AG200 will certainly help you make a decision on the purchase.
If you already are a holder of Extreme Networks Sentriant AG200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extreme Networks Sentriant AG200.
However, one of the most important roles played by the user manual is to help in solving problems with Extreme Networks Sentriant AG200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extreme Networks Sentriant AG200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
