Instruction/ maintenance manual of the product 613-001480 Allied Telesis
Go to page of 16
PN 613-001480 Rev A 1 A T -S94 V ersion 3.0.0.41 A T -8000S Switch Softwar e Release Notes Please read this document before you be gin to use the management softwa re. Caution Failure to upgrade the bootloader before the release soft ware can result in a switch that will not boot.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 2 Allied Telesis, Inc. Supported Platforms The following platforms are included in the AT -8000S family of devices: A T -8000S/16 – 16 FE ports with 1 combo 10/10 0/1000 SFP Port.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 3 Allied Telesis, Inc. What’s New in Version 3.0.0.41 New Software Features None Resolved Issues In some cases where more than one switch has the same STP Bridge Priority value in a network, the swit ch with the higher MAC address wo uld be elected as the STP root bridge.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 4 Allied Telesis, Inc. Port lock: Port security mechanism is not trigg ered for MAC violation if MAC is learned on another locked port as a secured MAC ad dress. Recommended User W ork Around: No work around Mac-group mapping and 802.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 5 Allied Telesis, Inc. Version 3.0.0.41 Upgrade Process You must have the correct software and bootloader installed o n your switch before be ginning the upgrade process to Version 3.0.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 6 Allied Telesis, Inc. 6. Assuming your switch is running the correct bootloa der, you have the correct password to extract the ats94-30041.ros software upgrade file and you know that your current bo otloader is compatible with the Version 3.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 7 Allied Telesis, Inc. 10. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 8 Allied Telesis, Inc. 5. Select number one by pressing the ‘1’ key. The switch will respond with the following message : Begin the transmission of a previous version. Downloading code using XMODEM.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 9 Allied Telesis, Inc. Version 3.0.0.33 When the master was lost (powered do wn) the SFP port(s) on backup change d to DOWN – link changed to half duplex and remained down. This issue has been resolved.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 10 Allied Telesis, Inc. The following is a new CLI command introduced in V ersion 3.0.0.40: Version 3.0.0.38 No new features were introduced in this release. Version 3.0.0.35 No new features were introduced in this release.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 11 Allied Telesis, Inc. The following 802.1x feature enhance ments will be su pported: — Guest VLAN - This feat ure allows network adm inistrators to giv e some limited access to the network to unauthorized port s.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 12 Allied Telesis, Inc. Upgrade Procedure fr om Version 1.0.0.25 All software released after version 1 .0.0.25 requires additional FLASH sectors beyond the current amount of FLASH sectors currently allocated for the image.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 13 Allied Telesis, Inc. 2. Download the ats94-Interim image drop to the device via TFTP by using one of the followin g commands depending on your configuration: Note You must substitute the IP address of your local TFTP server.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 14 Allied Telesis, Inc. 7. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 15 Allied Telesis, Inc. 14. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 16 Allied Telesis, Inc. Contacting Allied Telesis This section provides Allied Teles is contact information for technical support as well as sales and corporate information. Online Support You can request technical support online by accessing the Allied Tel esis Knowledge Base: www.
An important point after buying a device Allied Telesis 613-001480 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allied Telesis 613-001480 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allied Telesis 613-001480 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allied Telesis 613-001480 you will learn all the available features of the product, as well as information on its operation. The information that you get Allied Telesis 613-001480 will certainly help you make a decision on the purchase.
If you already are a holder of Allied Telesis 613-001480, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allied Telesis 613-001480.
However, one of the most important roles played by the user manual is to help in solving problems with Allied Telesis 613-001480. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allied Telesis 613-001480 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
