Instruction/ maintenance manual of the product EM500NH P2 EverFocus
Go to page of 10
EVERFOCUS 1/3” Square Metal Case DSP Color CCD Camera Operation Instructions Model No. EM500NH P1, P3, P4 Please read this manual first for correct install ation and op eration. This manual should be re tained for future reference. The infor mation in this ma n ual was current when published.
1 7. Do not operate the camera beyond the specified temperatu r e, humidity or power source ratings. Use the camera at temperatures within 0° ~ 40° C (32° to 104° F ) and humidity between 20%~ 80%. The input power source is 12VDC/24V AC. FEA TURES z 1/3” Sony Super HAD CCD i mage sensor with approximately 410,000 pixels.
2 SPECIFICA TIONS EM-500NHP1 EM- 500NHP1 EM-500NHP1 Lens Size 3.7mm 3.7mm 4.3mm Lens Type Conical Pinhole Lens Flat Pinhole Lens Super Cone Pinhole Lens Dimensions 25 x 25mm | 0.98 x 0.98 Inches Vide o Format NTSC Image Sensor Color 1/3” High Res CCD Sony ICX638 Chip Scaning System 2:1 Interlace Scanning Frequency H: 15.
3 DIMENSIONS Camera: Bracket: 15mm/ .6” 25mm / .98 " 8mm / .31" 15.4mm / 0.6" 6mm / .2" 14mm / .6" 18mm / .7" 2mm / .8" 18mm / .
4 CAMERA MAJOR P AR TS FUNCTIONS Front Back Camera power/video cable (1) Lens The EMNH series cameras come with 3 types on pinhole lenses. • Flat - EM500HP3, • Conical – EM500NHP1 • Super Conical – EM500NHP4 (2) Scr ew holes for included mounting bracket.
5 (3) Power/video port. (4) Power/video connector to be plugged into the camera. (5) V ideo Output BNC Connector BNC 1.0Vp-p, 75ohm. Use the connector to connect with the video in connector of a monitor . (6) Power input Use the connector to connect with 12VD C power adaptor .
6 2. Fix camera to mounting Bracket. a. Position the camera ready to be mounted on bracket so that the power/video connector is on the bo ttom to ensure that the camera is facing right side up . See arrow in figure 2.1 pointing at the power/video connector on bottom.
7 Pigtail Polarity: (Important since DC voltage is used) Black Wire with white stripe is positive and solid black wire is negative. See figure A4-2. c.
8 T r oubleshooting No power Check to be certain that you have sufficient current or amperage from the power supply . Amount of current needed depends on voltage. See this manuals spec. sheet for information on power consumption. Picture output is hor izontal.
9 EverFocus Electronics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai Wu Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA California Office: 1801 Highland A ve. Unit A Duarte, CA 9101 0, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
An important point after buying a device EverFocus EM500NH P2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EM500NH P2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EM500NH P2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EM500NH P2 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EM500NH P2 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EM500NH P2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EM500NH P2.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EM500NH P2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EM500NH P2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
