Instruction/ maintenance manual of the product EKB200 EverFocus
Go to page of 17
EKB200 USB Controller Keyboard Inst allation / Operation Instructions Rev . 1.0.
1 SAFETY W ARNINGS • Do not place the device near to heaters, furnaces, ot her heat sources or under di rect solar irra diation. • Operate the device only in locatio ns p roviding t he tolerable operating tem perature range 0° C~50° C. • For cleani ng, make sure the device is plugge d off and only use a damp cloth without acid det erge nt.
2 CONTENTS 1 Introdu ction ...................................................................................................................................................... 2 2 Deliver y scope .....................................................
3 3 SPECIFICA TIONS Interface: USB1.1 (USB2.0 comp atibl e) PTZ function key: 4 keys, Iris+, Iris-, Focus+, Foc us- Re-assignment key : 12 keys Default protocol: USB HID class 3 axis Game controller M.
4 INST ALLA TION 3.1 USB - Connection Connect the USB-cable to the USB port of the PC or device, wh ich supports EKB-200. The EKB-200 is compatible to USB 1.1 and USB 2.0 interfaces. The EKB-200 wi ll be detected by PC as "USB, 3-Axis, 16 button gamepad".
5 3.3 Key labels The EKB-200 provides exchangable key descr iption labels. This allows the user to customize the key labels to his application and the assigned key functions. Example: The label sheets have a size of 104 x 9.5 mm. 9.5 A key lable template form in *.
6 In Settings mode, click “calibrate” button to do calibration. 4. In Device Calibration Wizard st arting p ag e, click “Next” to continue. 5. T o find center point, leave the handle centered, then press a button on the controller . Click “Next” to continue.
7 6. Move the handle in complete circles, then press a button on the controller . Click “Next” to continue. 7. T o verify center point, leave the handle centered, then press a button on the controller . Click “Next” to continue. 8. Move the Z axis all the way up and down, then press a button on the controller .
8 3.5 Inst allation o f JoyMap The JoyMap tool allows the assignment of standard windows operat ions to the EKB-200. Inst allation step s of JoyMap for EKB200: Double click “Setup.exe” file. The installer will guide you through the step s required to inst all JoyMap for EKB200 on your computer .
9 5. With the message "Insta llation Com plete" the JoyMapper setu p is finish ed. Click “Close” to exit..
10 4 OPERA TION 4.1 Assigning Windo ws functions with Joy Map - application NOTE: The EverFocus JoyMapper application will only wo rk correctly with conn ected EKB200 keyboards. Other joystick devices are not supported . If no EKB200 is connected, the application will show after st art: " DEVICE: No EKB200 found ".
11 S t a r t wi t h wi nd o ws: JoyMapper will automat ically st art s with windows st art. Run minimized: JoyMapper window will be minimized if you check this box. Check input (mSec): Delay time between the commands com ing from the Joystick are read into the application.
12 None: Set the device as none if you are not using a speci al key for the device. Mouse: Set mouse definition for the device. For example, fo r button 1, if you wish to set it as a left click button, select left click and mouse d efinition will b e shown in “key” column: System: Set system function for the device.
13 Profile Switch: this is used to switch between profiles. Application Switch: this is us ed to switch between applications..
14 4.2 EKB-200 Operation with PowerCon Management Sof tware The EKB-200 keyboard is suppor ted in PowerCon management so ftware from version 4.3. In factory settings, the keys are assigned to followin.
15 Select a key in the list. Right click in the right corner of any field in the "Action" Column to open a context menu with a selection of available PTZ comm and s. If the command requires a value, such a s GoT o Preset [x] or T our [x], enter the number [x] in the field "V alue".
16 EverFocus Electronics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai Wu Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus .com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
An important point after buying a device EverFocus EKB200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EKB200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EKB200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EKB200 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EKB200 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EKB200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EKB200.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EKB200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EKB200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
