Instruction/ maintenance manual of the product EHD300 EverFocus
Go to page of 13
EVERFOCUS 1/3” Color Rugged Dome Camera Operation Instructions Model No. EHD300 Please read this manual first for correct installa tion and operation. This m anual should be retained for future reference. The information in th is manual was curren t when published.
6. Do not operate the camera beyond the specified temperatur e, humidity or power sour ce ratings. Use the camera at temperatures with in –10 ℃ ~ 50 ℃ /14 ℉ ~ 122℉ and humidity between 20%~ 80%.
INST ALLA TION 1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1). Please pay attention not to damage the lens. Figure 1 2. Remove the camera. V ari-Focal Lens Locking Screws Figure 2 T o remove the camera, first unplug the wire connection on the back of the cam era.
3. Mounting the base. Attach the base to the wall or ceiling , fix the base by the 4 setscrews attached in the accessory pack. Please make sure if the m ounting is strength ened enough to support it, if not, please reinforce the mounting according to the environm ent.
Back conduit entry (PF1/2) Conduit plug The camera comes with a conduit plug pre-installed in the PF 1/2 conduit entry on the side. The screw can be rem oved and installed in the back conduit entry . Loosen the conduit plug setscrew (as shown in Figure 4) before removing the conduit plug.
Micro Switch for Alarm trigger V ideo Alarm COM GND Alarm NO Power In (+) Power In (-) Alarm NC V . Phase Adjustment VR Figure 5 Connect the power supply cable (12 VDC/24V AC), video output and alarm output to the proper connect ors shown as Figure 5.
60 ° Lens fixing Screws 360 ° 140 ° Figure 6 6.
DIP SWI TCH FUNCTION V ari-Focal Lens FL (Flickerless Functio n) ON/OFF When picture flicker fiercely , turn FL on, th en the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(P AL) automa tically , and reduce the flicker immediately .
D/N OFF: Camera stays in color mode. Note: when AGC setting is OFF , then D/N function will be inactive. The default setting is OFF . IRIS Level Adjustment Brightness Level can be adjust ed from the IRIS level VR. T urn counterclockwise to L to get darker picture.
SIMPLE INSTRUCTIONS FOR THE DESICCANT P ACK Due to the camera lens blurred from the hum idity inside the camera. The desiccant pack absorbs the humidity; p lease refer to the easy instruction as follows: 1. Adjust all settings first and pl ace the desiccant pack on the ho rizontal rod, then bend the horizontal rod and fix it.
SPEC IFICA TIONS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL NTSC: 525 TV lines, 60 fields/sec. Scanning System PAL: 625 TV lines, 50 fields/sec. Picture Elements 768 x 494(NTSC) ; 752 x 582(PAL) Horizontal Resolution 520TVL Sensitivity 0.
CONTENT LIST S tandard Accessories 1. Camera Unit 2. Operation Instruction (this document) 3. Accessory Pack 4. W aterproof Connector 5. Power & V ideo Cable Optional Accessory 1.
EverFocus Electr onics Corp. Headquarter Office 12F , No.79 Sec.1 Shin-T ai Wu Road, Hsi-Chi, T aipei, T aiwan T e l: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,T echnology T rade Building.
An important point after buying a device EverFocus EHD300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EverFocus EHD300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EverFocus EHD300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EverFocus EHD300 you will learn all the available features of the product, as well as information on its operation. The information that you get EverFocus EHD300 will certainly help you make a decision on the purchase.
If you already are a holder of EverFocus EHD300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EverFocus EHD300.
However, one of the most important roles played by the user manual is to help in solving problems with EverFocus EHD300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EverFocus EHD300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
