Instruction/ maintenance manual of the product Biamplified Direct Field Monitor System Event electronics
Go to page of 8
USER GUIDE.
Thank you for choosing the T uned Reference ™ Biamplified Direct Field Monitor System. T o get the most from your new monitors, please take a moment to read this manual and familiarize yourself with the pr oduct’s features, set-up, and use.
TUNED REFERENCE USER GUIDE Setup Y ou’ll notice that the T uned Refer ence monitors ar e physically identical. When used in a stereo configuration, ther e is no physical or acoustic distinction between the left and right speakers.
most accurate stereo r epr oduction. If you need a wider sweet spot to allow for greater listener movement or for group monitoring, face the speakers in a slightly more open position, but never mor e than necessar y .
The Line 2 input connector is hardwir ed in parallel with the Line 1 input connector , so either may be used as an input or as a pass-through connection. Input specifications apply equally to both inputs. Figure 2. Tuned Reference rear panel connections and controls.
Input Sensitivity This control is used to compensate for dif fer ent signal levels that appear at the input. The control has a 20dB range; when set at maximum (MAX), 0.5V RMS input at the balanced ins or 0.25V RMS at the unbalanced in will produce full amplifier output.
Contacting Customer Service If you experience any trouble with your T uned Reference monitors, please call the Event Electronics Customer Ser vice depar tment at 805-566-7777, ext. 5. Before calling, however , we ask that you please consult the T echnical Suppor t section of our W eb site, www .
T uned Refer ence Specifications (cont.) Input Impedance 40k Ω balanced, 20k Ω unbalanced Input Sensitivity 0.5V RMS input at the balanced ins or 0.
An important point after buying a device Event electronics Biamplified Direct Field Monitor System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Event electronics Biamplified Direct Field Monitor System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Event electronics Biamplified Direct Field Monitor System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Event electronics Biamplified Direct Field Monitor System you will learn all the available features of the product, as well as information on its operation. The information that you get Event electronics Biamplified Direct Field Monitor System will certainly help you make a decision on the purchase.
If you already are a holder of Event electronics Biamplified Direct Field Monitor System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Event electronics Biamplified Direct Field Monitor System.
However, one of the most important roles played by the user manual is to help in solving problems with Event electronics Biamplified Direct Field Monitor System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Event electronics Biamplified Direct Field Monitor System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
