Instruction/ maintenance manual of the product SHARK V1925 Euro-Pro
Go to page of 8
Cordless Rechargeable Sweeper with No Touch Dust Cup COPYRIGHT © EURO-PRO OPERATING LL C 2006 USA: EURO-PRO OPERATING LLC Canada: EURO-PRO OPERATING LLC 94 Main Mill Str eet, Door 16 4400 Bois Franc Plattsburg, NY 12901 St. Laurent, Q C H4S 1A7 Tel.: 1 (800 ) 798-7398 www.
.
1. Do not charge this unit outdoors. 2. Do not use outdoors or on wet surfaces. 3. Do not allow to be used as a toy. Close attention is necessar y when used by or near children. 4. Use only as described in this manual. Use onl y manufacturer’s recommended attachments.
2 NOTE : The c ordless sweeper is shipped with the batteries uncharged. Charging of the unit for 20 hours prior to first use is required. Use replacement battery # XBV1925 on ly. 11 OPERATING INSTRUCTIONS TROUBLESHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION SWEEPER WILL NOT OPERATE 1.
Assembling Your C ordless Sweeper Your cordless sweeper will require very littl e assembly. You should remove it from the carton and familiarize yourself with all t he components listed per the exploded view drawing (page 2). This will help you in t he as sembly and operation of your cordless sweeper.
Charging Instructions 1. Connect the charger plug to the charging jack or hole on the backside of the sweeper. Plug the charging adapter into the wall outlet. (120V., 60Hz.) Use only K-TEC charger KA12D07501502 3U . (Fig. 2) 4 Operating Instructions 2.
To Maximize The Life Of Your Ni-cd Batteries 1. Charge for a minimum of 20 hours before initial use. Failure to do so will reduce the product’s battery life significantly. 2. Do not store the unit with the charging ad aptor attached and plugged in. 3.
Operating Instructions 6 Removal of Batter y Pack 1. Turn unit over so that the base is facing upwards. Be careful not to turn the unit ON . 2. Push in locking tab and lift off the battery compartment cover.
An important point after buying a device Euro-Pro SHARK V1925 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro SHARK V1925 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro SHARK V1925 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro SHARK V1925 you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro SHARK V1925 will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro SHARK V1925, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro SHARK V1925.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro SHARK V1925. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro SHARK V1925 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
