Instruction/ maintenance manual of the product K2-XT Eureka! Tents
Go to page of 2
Fig.1 B A C G F D E H ASSEMBL Y INSTRUCTIONS FOR THE K2-XT Component List: 1 T ent Body 1 Fly 4 Poles 1 V estibule Rod 1 Carry Bag 1 Pole Bag 1 Bag w/ Stakes Assembly: 1 Unpack the carry bag and separate the components. Unfold the tent body and lay it out with the floor on the ground and a gr ommeted web in each corner .
Good: 4 stakes / 4 lines Best: 4 stakes /8 lines REV E. F EB 09 SEAM S EALI N G: We recommend use of a sealer such as Kenyon Seam Sealer 3 or McNett Outdoor SeamGrip ® . • Work in a fully ventilated area. • Set the tent up or lay the tent out flat.
An important point after buying a device Eureka! Tents K2-XT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eureka! Tents K2-XT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eureka! Tents K2-XT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eureka! Tents K2-XT you will learn all the available features of the product, as well as information on its operation. The information that you get Eureka! Tents K2-XT will certainly help you make a decision on the purchase.
If you already are a holder of Eureka! Tents K2-XT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eureka! Tents K2-XT.
However, one of the most important roles played by the user manual is to help in solving problems with Eureka! Tents K2-XT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eureka! Tents K2-XT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center