Instruction/ maintenance manual of the product UF18VNV Alliance Laundry Systems
Go to page of 92
www .comlaundry .com W asher -Extractor Cabinet F reestanding Model Numbers SF18VNV SF2 5VCV UF18 VNV SF25VN V UF25PNV UF2 5VNV NO T A: El ma nual en español aparece desp ués del manual en inglés.
.
F232060 1 T able of Contents Installation/Maintenance © Copyright, Alliance Laundr y Sys tems LLC – DO N O T COPY or T RANSMIT Safety Key to Symbols ............... ........... ........... ............ 4 Operator Safety .............. ........... .
F232060 2 © Copyright, Alliance Laundr y Syst ems LLC – DO NO T COPY or TRANSMIT © Copyri ght 2002 All iance Laundry Syst ems LLC All ri ghts rese rved. No p art of t he content s of this book may be reproduc ed or tran smitted i n any fo rm or by any means wit hout t he express ed writ ten conse nt of the publi sher.
F232060 3 Section 1 Safety © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Anyone operating or servicing this machine must follo w the safet y rules in this manual. Particular attention m ust be paid to the D ANGER , WA R N I N G , and CA UTION blocks which appear throughout the manual.
Safety 4 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Ke y to Symbols The lightning flash and arro whead within the triangle is a warning sign indicating the presence of danger ous v oltage.
5 Safety F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT T o provide personal safety and keep the machine in proper working order , follo w a ll maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the factory immediately .
Safety 6 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Safe Oper ating En vironment Safe operation requires an a ppropriate operating en vironment for both the operator and the machine. If questions regarding safety arise, contac t the factory imme diately .
7 Safety F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Machine Location • F oundation . The concrete floor must be of suf f icient strength and thickness to handle the floor loads generated by the high extract speeds of the machine.
Safety 8 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Safe Oper ating En vironment (Continued) Alwa ys disconnect power and w ater supplies before a service t echnician performs any service procedure. Wh ere applicable, steam and/or compressed air supplies should also be disconnected before servic e is performed.
F232060 9 Section 2 Installation © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT This manual is designed as a guide to the installation and maintenance of the 18-pound and 25-pound capacity freestanding washer -extractors.
Installation 10 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Delive ry In specti on Upon deli very , visually inspect crate, protectiv e co ver , and unit for any visible shipping damage.
11 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Figure 1 Model Number F amiliarization G uide Sample M odel N umber : UF1 8VNVQU10001 SF , UF Machine T.
Installation 12 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Cabinet Freestanding General Specific ations 18 25 Overall Dimensions Over all width, i n (mm) 29.0 (737 ) 32.0 (813 ) Over all height, in (mm) 46.0 (116 8) 48.
13 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 18 25 Driv e T rain Inf or mat ion Number of motors in driv e train 1 1 Dri v e motor po wer, hp (kW) 1.
Installation 14 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Dimensional Clear ances Both single and multipl e machine inst allations require specified mini mum clear ances on all sides of each machine. The table below sho ws these cleara nces.
15 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Figure 2 1 5/16" 33 mm 4 1/2" 114 mm 40 1/2" 1029 mm 42 5/16" 1074 mm 3 13/32".
Installation 16 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Figure 3 1 1/2" 38 mm 4 13/16" 122 mm 42" 1067 mm 42 5/16" 1074 mm 3 13/32" 86.
17 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Figure 4 For most installations, a 1-inch (25 mm) clearanc e between machines is sufficient. When an ele vated base frame is used, a 3/8-inch (10 mm) clearance is provided by the base.
Installation 18 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Machine Foundation Thoroughness of detail must be stressed with all foundation work to ensure a stable unit installat ion, eliminati ng possibilities of excessi ve vibration during extract.
19 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mecha nical Instal lation Figure 5 3 1/2" 89 mm 3 1/2" 89 mm R025IE3A 27" 686 mm 1".
Installation 20 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mecha nical Instal lation (Continued) Note : The 18-pound and 25-pound capacity freestanding washer -extractors do not require anchoring unless mandated by state or local codes.
21 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Drain Connection A drain system of adequate capacity is essential to washer -extractor performance. Ideally , the water should empty through a vented pipe directly into a sump or floor drain.
Installation 22 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Drain Connection ( Continued) *These figures a re appro ximat e values o nly . Cabinet Freestanding Drain Inf ormation Overflo w size, in (mm) 1.5 (3.8) Drain conn ecti on siz e, I.
23 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT W ater C onnection Connections should be supplied b y a hot and a cold wa ter line of at le ast the sizes sho wn in the W ater Supply Line Sizing table. Installation of addition al machines will require proportionately larger w ater lines.
Installation 24 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Electri cal In stallation The A C in verter driv e requires a clean power supply free from voltage spik es and surges. A voltage monitor shoul d be used to check incoming po wer .
25 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT The A C dri v e provides o v erload protection for the dri v e motor .
Installation 26 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT . Note : The X vo ltage is not compat ible with CE and/or electric heat models. IMPOR T ANT : F or machines with X voltage: If input power is single-phase, connect L1 to L1 of terminal block and L2 to L2 of terminal block.
27 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Steam Requirements (Steam Heat Option Only) For machines equipped with optional steam heat, install piping in accordance with approv ed commercial steam pra ctices.
Installation 28 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Chemical In jection Suppl y System Undiluted chemical dripping can damage the machine. Therefore, a ll chemical supply dispenser pumps should be mounted below the was he r ’ s injection point.
29 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT The input po wer box houses a cage clamp strip which furnishes supply output signals for the chemical injection supply pumps. An external po wer source must be used to provide po w er to the injection system on the P volt age.
Installation 30 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Consult the chemical injection supply system instructions for operational details.
31 Installation F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Cont r ol Func ti on T est The machine should be cleaned af ter the installation is complete. A function test should then be ex ecuted on the unloaded machine: 1.
Installation 32 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Notes.
F232060 33 Section 3 Maintenance © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Routine mainte nance maxi mizes operating ef f iciency and minimizes do wntime. The maintenance proce dures describe d belo w will prolong the life of the machine and help pre v ent a cci dents .
Maintenance 34 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Daily (Continued) End of Da y 1. Clean the A C drive box f ilter: a. Snap off the e xternal plastic cov er which contains the filter . b . Remo ve the foam f ilter from the c ov er .
35 Maintenance F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT See Figure 14. Loosen motor mounting bolts and slide motor along motor plate to change belt span length. Belt deflection should be measured as close to the ce nter of the span leng th as possible.
Maintenance 36 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Quar te rly Note: Disconnect power to the machine before performing the quarterly maintenance procedures. 1. T i ghten door hinges and fasteners, if necessary .
37 Maintenance F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT • Discolorations or heat tint from ov erheating may be remov ed by scouring with a po wder or by emplo ying special chemic al solutions.
Maintenance 38 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Daily Prev entive Maintenance Check list Mac hine _____ _____ _______ ____ _____ __ Operator ___________________________ We e k o f : _ _____ _______ ___ Da ys Chec ks 1234567 Observe All Saf ety W arnings! Beg inn i ng of Da y 1.
39 Maintenance F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT W eekly P re ventive Ma intenanc e Chec kli st Mac hine _____ _____ _______ ____ _____ __ Operator ___ _______ _____ _____ ____ ___ Month _______ ___ W eek Ending Chec ks ///// Observe All Saf ety W arnings! 1.
Maintenance 40 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Monthly Pr eventive Mai ntenance Chec klist Mac hine _____ _____ _______ ____ ___ Operator _ _____ _____.
41 Maintenance F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Quar terly Pr eventive Main tenance Checklis t Mac hine ___ _____ _______ ____ _____ Operator ___ ______.
Maintenance 42 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Notes.
F232060 43 Section 4 Remo v al from Ser vice © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Decommissioning In the e v ent that t he machine must be decommissioned, follo w these steps: 1. Remo ve the chemical injection supply system, if applicable.
Remo v al fr om Ser vice 44 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Remov al from Ser vice (Continued) e. Use cro wbars at the front corners to lift the machine a fe w inches so that the forks of a forklift truck c an reach under the machin e.
La v adora extractora Gabinete aut ó nomo Númer os de modelo SF18VNV SF2 5VCV UF18 VNV SF25VN V UF25PNV UF2 5VNV Pieza No . F232060R4 Julio 2002 Instalació n/Mantenimiento www .
.
47 T abl a de contenido Instalaci ó n/Mantenimiento F232060 (SP) © C op yright, Alliance Lau ndry Systems LLC – DO NO T COPY or TRANSMIT Seguridad Leyenda de l os s í mbolos ............ ........... ........... . 50 Seguridad del op erador ... ..
F232060 (SP) 48 © Copyright, Alliance Laundr y Syst ems LLC – DO NO T COPY or TRANSMIT © Copyrig ht 2002 Alliance La undry Sy stems LLC Todos los derechos r eservado s. No se pu ede repro ducir ni t ransmitir d e ninguna f orma nin guna parte del conteni do de es te libro o por ni ng ú n medio sin e l consent imiento es crito de la edito rial.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT F232060 (SP) 49 Secci ó n 1 Seguridad Cualquier persona que oper e o efect ú e el servicio en esta m á quina debe seguir las regl as de seguridad de este manual.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Seguridad 50 F232060 (SP) Leyenda de los s í mbolos El rayo y la punta de flecha dentro de un tri á ngulo es una se ñ al de advertencia que indica la presencia de un voltaje peligroso.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 51 Seguridad F232060 (SP) Para proporcionar la se guridad personal y mantener la m á quina en buenas condiciones de operaci ó n, siga todos los procedimientos de mantenimiento y seguridad presentados en este manual.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Seguridad 52 F232060 (SP) Entorno de operaci ó n seguro La operaci ó n segura requiere un entorno de operaci ó n apropia do tanto para el operador como para la m á quina. Si sur gen dudas sobre la segu ridad, p ó ngase en contacto de inmediato con la f á brica.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 53 Seguridad F232060 (SP) Po s i c i ó n de la m á quina • Cimientos . El suelo de hormig ó n debe tener una resistencia y un espesor suficientes para soportar las car gas del suelo gener adas por las altas velocidades de e xtracci ó n de la m á quina.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Seguridad 54 F232060 (SP) Entorno de operaci ó n seguro (continuaci ó n) Desconecte siempre los suministros de corriente y agua antes de que un t é cnico de servicio efect ú e cualquier procedimiento de servicio.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT F232060 (SP) 55 Secci ó n 2 Instalaci ó n Este manual ha sido dise ñ ado como gu í a para la instalaci ó n y el m antenimiento de las la va doras extractoras aut ó nomas con capacidad para 18 y 25 libr as.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 56 F232060 (SP) Inspecci ó n de entrega En el momento de la entrega, inspeccione visualmente el embalaje, la cubierta protectora y la unidad para ver si se han producido da ñ os visibles durante el transporte.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 57 Instalaci ó n F232060 (SP) Figura 1 Gu í a de familiarizac i ó n con los n ú mer os de modelo Muestra de u n n ú mero d.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 58 F232060 (SP) Gabinete aut ó nomo Especificaciones generales 18 25 Dimens iones ge nerales Anc ho gene ral, m.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 59 Instalaci ó n F232060 (SP) 18 25 Inf ormaci ó n del si stema d e impul si ó n N ú mero de motor es en el sistema de impu.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 60 F232060 (SP) Dimensiones de separaci ó n T anto las instalaciones de m á quinas sencilla s como m ú ltiples requieren separaciones m í nimas especificadas en todos los lados de la m á quina La tabla siguiente indica estas separaciones.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 61 Instalaci ó n F232060 (SP) Figura 2 33 mm 1 5/16 plg 114 mm 4 1/2 plg 1029 mm 40 1/2 plg 1074 mm 42 5/16 plg 86 mm 3 13/32 .
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 62 F232060 (SP) Figura 3 38 mm 1 1/2 plg 122 mm 4 13/16 plg 1067 mm 42 plg 1074 mm 42 5/16 plg 86 mm 3 13/32 plg.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 63 Instalaci ó n F232060 (SP) Figura 4 Para la mayor í a de las instalaciones, una separaci ó n e ntre m á quinas de 25 mm (1 plg) ser á suf iciente. Cuando se use una base ele vada, la base proporcionar á una separaci ó n de 10 mm (3/8 de plg).
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 64 F232060 (SP) Cimientos de la m á quina Es muy importante seguir todos los detalles de los cimientos para asegurarse de una inst alaci ó n estable de la unidad, eliminando la posibilidad de vibra ciones exc esi v as durante la extracci ó n.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 65 Instalaci ó n F232060 (SP) Instalaci ó n mec á nica Figura 5 89 mm 3 1/2 plg 89 mm 3 1/2 plg R025IS3A 686 mm 27 plg 25 mm.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 66 F232060 (SP) Inst alaci ó n mec á nica (contin uaci ó n) Nota : Las lav adoras ext ractoras aut ó nomas con capacidad para 18 y 25 libras no requieren anclaje a menos que as í lo exijan los c ó digos locales o e statal es.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 67 Instalaci ó n F232060 (SP) Inst alaci ó n mec á nica (contin uaci ó n) 5. Quite los espaciadores con cuidado, permitiendo que la m á quina se asiente sobre la lechada mojada.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 68 F232060 (SP) Conexi ó n de drenaje ( continuaci ó n) Antes de desviarse de los procedimientos de inst alaci ó n especificados, el cliente o el instalador debe ponerse en contac to con el distrib uidor .
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 69 Instalaci ó n F232060 (SP) Conexi ó n de agua Se deben suministrar cone xiones por una tuber í a de agua caliente y fr í a que tenga a l menos los tam a ñ os mostrados en la tabla de dimensiones de las tuber í as de suminist ro de agua.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 70 F232060 (SP) Instalaci ó n el é ctrica El mando del in versor de CA requiere una fuente de alime ntaci ó n limpia si n aumentos s ú bitos de v oltaje. Se debe usar un monitor de v oltaje para comproba r la corriente de entrada.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 71 Instalaci ó n F232060 (SP) El mando de CA proporciona una protecci ó n de sobrecarga para el motor de mando.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 72 F232060 (SP) . Nota : El vol taje X no es compatible con los modelos de la CE y/o de calor el é ctric o.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 73 Instalaci ó n F232060 (SP) Requisitos de vapor (Opci ó n de calentamiento de v apor solament e) Par a m á quinas equipadas con ca lentamiento de v apor optati v o, instale las tuber í as se g ú n las pr á cticas de vapor comerciales aprobadas.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 74 F232060 (SP) Sistema de suminist r o de inyecci ó n de pr oductos qu í micos El goteo de productos qu í micos sin diluir puede da ñ ar la m á qui na.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 75 Instalaci ó n F232060 (SP) La caja de corrien te de entrada alberga una tira de abrazadera de jaula que proporciona se ñ ales de salida para las bombas de suministro de inyecci ó n de productos qu í micos.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 76 F232060 (SP) Consulte los detalles de operaci ó n en las instrucciones del sistema de suministro de inyecci ó n de productos qu í micos. Consul te las Figuras 12 y 13 para informaci ó n sobre las calc oman í as de tira de terminal.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 77 Instalaci ó n F232060 (SP) Prueba de funci ó n de contr ol La m á quina debe limp iarse des pu é s de terminar la i nstalaci ó n. Despu é s debe ejecutarse una prueba de funci ó n en la m á quina descarga da: 1.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Instalaci ó n 78 F232060 (SP) Notas.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT F232060 (SP) 79 Secci ó n 3 Mantenimiento El mantenimiento de rutina aumenta al m á ximo la ef iciencia de operaci ó n y reduce al m í nimo el tiempo de inacti vidad.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mantenimiento 80 F232060 (SP) Diariament e (continuaci ó n) 4. Compruebe el enclav amiento de la puerta antes de empezar la oper aci ó n: a. Intente poner en ma rcha la la v adora con la puerta abierta.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 81 Mantenimiento F232060 (SP) Mensualmente Nota: Desconecte la corr iente de la m á quina en la fuente original antes de e fectuar los procedimientos de mantenimiento mensuales.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mantenimiento 82 F232060 (SP) Figura 15 3. Quite el panel trasero y compruebe si hay fugas en la manguera de rebose y manguera de drenaje. 4. Desbloquee la tapa abisagrada y compruebe las mangueras del distribuidor y sus conexi ones.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 83 Mantenimiento F232060 (SP) Cuidado de l acero ino x idable Mantenga la belleza natural del acero inoxidable y prolongue su vida de servicio siguiendo los siguientes consejos: • Los dep ó sitos normales de suciedad y grasa pueden limpi arse con agua y deter gente.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mantenimiento 84 F232060 (SP) Lista de com pr obaci ó n de mant enimiento preventiv o diario M á quina __ _______ ____ ______.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 85 Mantenimiento F232060 (SP) Lista de comprobaci ó n de mantenim iento preventiv o semanal M á quina __ _______ ____ _______.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mantenimiento 86 F232060 (SP) Lista de comprobaci ó n de mantenimiento pre ventiv o mensual M á quina __ _______ ____ _______.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT 87 Mantenimiento F232060 (SP) Lista de com pr obaci ó n de mant enimiento preventiv o trimestral M á quina __ _______ ____ __.
© Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Mantenimiento 88 F232060 (SP) Notas.
F232060 89 Secci ó n 4 Desconexi ó n del servicio © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Puesta f uera de servicio En caso de que la m á quina se vay a a poner fuera de servicio, siga estos pasos: 1. Quite el sistema de suministro de inyecci ó n de productos qu í micos, si corresponde.
Descone xi ó n del ser vicio 90 F232060 © Copyright, Alli ance Laundr y Systems LLC – DO NOT COPY or TRANSMIT Puesta f uera de servicio (continuaci ó n) c. Afloje y quite los pernos de anclaje que sujetan la base de la m á quina al suelo, si fuera pe rtinente.
An important point after buying a device Alliance Laundry Systems UF18VNV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems UF18VNV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems UF18VNV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems UF18VNV you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems UF18VNV will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems UF18VNV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems UF18VNV.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems UF18VNV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems UF18VNV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
