Instruction/ maintenance manual of the product UC80PN Alliance Laundry Systems
Go to page of 84
www .comlaundry .c om W asher -Extractor Cabinet Hardmount Instructions for Oper ating and Progr amming the S-Series Microcomputer Model Numbers HC25SN SC18SN UC25PN HC80SN SC25SN UC80PN SC27SN SC35SN SC50SN SC80SN P ar t No . F232073R4 March 2001 Operation/Pr ogramming NO T A: El manual en español apar ece después del manual en inglés.
.
F232073 1 Safety © Copyright, Alliance Laundr y Sys tems LLC – DO NOT COPY or TRANS MIT Tabl e of C ont ent s Operation/Programming Saf ety K e y to Symbols . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Decal Location . . . . . . . . . .
2 F232073 © Cop yright 200 1, Alliance Lau ndry Sys tems LLC All righ ts reser ved. No p art of th e conte nts of this book may be reproduc ed or tran smitted i n an y form or b y an y means witho ut the expre ssed wr itten con sent o f the publ isher .
F232073 3 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Section 1 Safety Anyone operating or servicing this machine must follo w the safety rules in this manual. P articular attention must be paid to the DA N G E R , W ARNING , and CA UTION blocks which appear throughout the manual.
Safety 4 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Key T o Sy m b o ls The lightning flash and arro whead within the triangle is a warning si gn indicating the presence of dangerous vo ltage.
F232073 5 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Safety decals appear at crucia l locations on the machine. Failure to maintain l egible sa fety decals could result in injury to the operator or service tech nician .
Safety 6 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT T o provide personal saf ety and keep the machine in proper working order , follo w all maintenance and safety procedures pre sented in this manual. If questions re garding safety arise, contact the f actory immediat ely .
F232073 7 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Safe Oper ating En vironment Safe operation requires an appropriate ope rating en vironment for both the operator and the machine. If questions regarding safety arise, contact the factory immediately .
Safety 8 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Safe Oper ating En vironment (Continued) Machin e Location F oundati on . The concrete floor must be of suf f icient strength and thickness to handle the floor loads generated by the high extract sp eeds of the machin e.
F232073 9 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Misuse Ne ver use this machine for any purpose other than washing f abric. Ne ver w ash petroleum-soaked rags in the machine. This could result in an explosion.
Safety 10 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Notes.
F232073 11 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Section 2 Oper ation This manual is designed as a guide to operating a nd programming the cabinet hardmount washer - extractor equipped with the S-Series microcomputer control.
Safety 12 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Machi ne F ami liarizatio n Figure 2 B011RE3A Operating Instructions Supply Dispenser On/Off Switch S-Serie.
F232073 13 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Theory of Operation The design of the machine emphasizes perfor mance reliability and long service life. The cylinder , shell, and main body panels are fabricated of stainless steel.
Safety 14 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Theory Of Operation (Continued) S-Computer The S-computer control is a programmable solid- state control capable of storing and running up to 30 cycles.
F232073 15 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT The follo wing table lists the v arious displays and what they mean. The operator should become familia r with these compute r displays. Displa y I ndications Display Meaning Display Meaning S-05 Program identification code (R OM) This is an ex ample only .
Safety 16 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Start-Up T ur n on the main po wer source (circuit br eaker or cut-of f switch on the w all). An identif ication code will appear for approximately f iv e seconds.
F232073 17 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Supply Dispenser Both liquid and po wder supplies m ay be added by raising the flexible co ve r of the dispenser . Liquid supplies may also be injected directly into the supply dispenser b y an external chemical supply system .
Safety 18 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Execution (Continued) If the machine is connected to an external chemical supply system, the programmed supply will be gin 10 seconds into the f ill.
F232073 19 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Drain At the conclusion of a spin, the drain v alve opens, and the cylinder turns counterclockwise (forward) at wash speed. This counterclockwise direction mirrors the spin rotation direction and is, therefore, considered forward.
Safety 20 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Notes.
F232073 21 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Section 3 Programming The computer board is inside the control module. Near the center of the board is a small toggle switch: this is t he R UN/PR OGRAM mode swit ch.
Safety 22 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Count T o display the current cycle count, press the Star t ke y while the display is sho wing the t emperature i n the sump.
F232073 23 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT 3. Use the Up or Down key to select the desired f ill tempera ture. See the follo w ing table for f ill options. 4. Press the Start key . 5. Use the Up or Down key to select the desired f ill le v el.
Safety 24 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Pr ogramming (Continued) 11. Use the Up or Down key to select the desired spin time. S et this v alue to z ero to skip the spin step. Press the Start key .
F232073 25 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Segment Char ts Segment 1 (Pre wash) Displa y Inst ructi ons Use the Up or Do wn ke y to change.
Safety 26 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Segment Char ts (Continued) Segmen t 2 (W ash) Display Instruct ions Use t he Up or Down ke y to change.
F232073 27 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Segments 3 – 7 (Fills 1 – 5 ) Display Instruct ions Use t he Up or Down key t o change.
Safety 28 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Segment Char ts (Continued) Segment 8 (F ill 6) Display I nstructions Use the Up or Down key to change.
F232073 29 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Cyc le Pr ogramming W orksheet Cycl e Pr ogramming W orksheet Progr am Pre was h W a sh Cyc le T ime ( Min).
Safety 30 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT S-Computer Cyc le Char ts S-Computer Standard Cyc les Program 1 Light Soil White s 2 Light Soil Colors 3 Me.
F232073 31 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Fill 3 T i m e ( M i n ) 00002 0 W ater --- --- --- --- Hot --- Le vel --- --- --- - -- High --- Supply ---.
Safety 32 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT S-Computer Cyc le Char ts (Continued) S-Computer Standar d Cycl es (Con tinu ed) Program 7 P erma nent Pres.
F232073 33 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Fill 3 T i m e ( M i n ) 20030 0 W ater W arm -- - --- Hot --- --- Le vel High -- - --- High --- --- Supply.
Safety 34 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT S-Computer Cyc le Char ts (Continued) S-Comput er Blank Cyc le Cha rts Program 13 14 15 16 1 7 18 Prewash T.
F232073 35 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Fill 3 Ti m e ( M in ) Wa t e r Le vel Supply Te m p ( F ) Spin (Sec) Fill 4 Ti m e ( M in ) Wa t e r Le ve.
Safety 36 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT S-Computer Cyc le Char ts (Continued) S-Computer Bla nk Cycle Charts (Conti nued) Program 19 20 21 22 2 3 2.
F232073 37 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Fill 3 Ti m e ( M in ) Wa t e r Le vel Supply Te m p ( F ) Spin (Sec) Fill 4 Ti m e ( M in ) Wa t e r Le ve.
Safety 38 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT S-Computer Cyc le Char ts (Continued) S-Comput er Blank Cyc l e Charts (Continued) Program 25 26 27 28 2 9 .
F232073 39 Safety © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Fill 3 Ti m e ( M in ) Wa t e r Le vel Supply Te m p ( F ) Spin (Sec) Fill 4 Ti m e ( M in ) Wa t e r Le ve.
Safety 40 F232073 © Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Notes.
www .comlaundry .com /DYDGRUDH[WUDFWRUD de gabinete de montaje per manente Instr ucciones de oper ación y progr amación de la microcomputador a serie S Números de modelo HC25SN SC18SN UC25PN HC80SN SC25SN UC80PN SC27SN SC35SN SC50SN SC80SN Pieza No .
.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 43 Contenido Operació n/Programaci ó n Seguridad Descripción de los símbolos . . . . . . . . . . . . . . . 46 Ubicación de las calcomanías de seguridad . . .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT 44 F232073 (SP) © Copyright 2001, Alli ance Laundr y Systems LLC Reservado s todos l os derec hos.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 45 Secci ó n 1 Seguridad Cualquier persona que use o que d é servicio a esta m á quina debe cumplir con las reglas de seguridad que incluimos en este manual.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 46 F232073 (SP) Descripci ó n de los s í mbolos El rayo con punta de flecha dentro del tri á ngulo es un signo de advertencia que indica la pre sencia de voltaje peligroso.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 47 Seguridad Hay calcoman í as de seguridad en lugares importantes de la m á quina. Si las calcoman í as no se mantienen de tal forma que se puedan leer , los operadores o t é cnicos de serv icio pueden sufrir lesiones.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 48 F232073 (SP) Para ofrecer seguridad personal y mantener la m á quina funcionando correctamente, cumpla con todos los procedimientos de mant enimiento y seg uridad que a parecen en este manual.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 49 Seguridad Medio ambiente d onde usar la m á quina sin peligro Para que la m á quina funcione sin peligro es necesario que el medio ambiente sea adecuado tanto para el operador como para la m á quina.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 50 F232073 (SP) Medio ambiente d onde usar la m á quina s in peligro (continuaci ó n) Ubicaci ó n de la m á quina Cimentaci ó n .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 51 Seguridad Uso incorrecto Nunca use esta m á quina con otro prop ó sito que no sea la v a r tela. Nunca lav e trapos remojados en petr ó leo en la m á quina.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 52 F232073 (SP) Notas.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 53 Secci ó n 2 Operaci ó n Este manual est á dise ñ ado como gu í a de funcionamiento y programaci ó n de la lav adora extractora de gabinete de montaje permanente equipada con el control de una microcomputadora de la serie S.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 54 F232073 (SP) Familiariza ci ó n con la m á quina Figura 2 B011RS3A Instrucciones de funcionamiento Sur tidor d.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 55 Seguridad Te o r í a de funcion amiento El dise ñ o de estas la va doras extractoras destaca la conf ianza en el re ndimiento y una lar ga vi da de servicio.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 56 F232073 (SP) Te o r í a de funcion amiento (continuaci ó n) Computadora serie S El control de la computadora serie S es un control de estado s ó lido capaz de al macenar y pr eparar hasta 30 ciclos.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 57 Seguridad En la siguiente tabla aparecen varios indicadores y sus signif icados. El operador debe familiarizarse con estos mensajes. Mensajes del indicado Indicador Significado Indicador Significado S-05 C ó digo de identificaci ó n del prog rama (R O M).
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 58 F232073 (SP) Arranque Conecte la fuente principal de energ í a (cortacircuitos o interruptor de corte de corriente en la pared). Aparece un c ó digo de identificaci ó n durante aproximadamente cinco segundos.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 59 Seguridad Surti dor de su ministros Se pueden agregar suministros tanto l í quidos como en polv o le v antando la cubierta fle xible del surtidor .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 60 F232073 (SP) Ejecuci ó n de un ciclo (contin uaci ó n) Si la m á quina se conecta a un sistema externo de suministro de productos qu í micos, el sumi nistro programado comienza 10 segundos despu é s de que comienza el llenado.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 61 Seguridad Desag ü e Al f inal del centrifugado, se abre la v á lvula de desag ü e y el cilindro gi ra en contra del sentido de l reloj (hacia adelante) a la velocidad de lav ado.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 62 F232073 (SP) Notas.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 63 Secci ó n 3 Pr ogramaci ó n El tablero de la computadora est á dentro del m ó dulo de control.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 64 F232073 (SP) Cuenta de cicl os Para mostrar la cuenta del ciclo actual, oprima la tecla Start (arrancar) mientra s el indicador muestra la temperatura en e l sumidero.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 65 Seguridad 3. Use la tecl a Up (arriba) o la te cla Do wn (a bajo ) para seleccionar la tempe ratura deseada de llenado. Las opciones de llenado aparecen en la siguiente tabla.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 66 F232073 (SP) Pr ogramaci ó n de cic los (continuaci ó n) 11. Use la tecla Up (arriba) o la te cla Do wn (a bajo ) para seleccionar el tiempo de centrifugado deseado.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 67 Seguridad T abl as de segmentos de cic los Segmento 1 (prela va do) Indicador Instrucciones Use la tecla Up (arriba) o la tecla Down (ab ajo) para cambiar . Oprima la tecla Start (arranca r) para ingresa r , re gistrar o a vanzar .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 68 F232073 (SP) T abl as de segmentos de cic los (continuaci ó n) Segmento 2 (lav ado) Indicador Instru cciones Use la tecla Up (arriba) o la tecla Down (abajo) para cam biar .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 69 Seguridad Segment os 3 al 7 (Ll enado s 1 al 5) Indicador Instrucciones Use la tecla Up (arriba) o la tecla Down (ab ajo) para cambiar . Oprima la tecla Start (arranca r) para ingresa r , re gistrar o a vanzar .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 70 F232073 (SP) T abl as de segmentos de cic los (contin uaci ó n) Segmento 8 (Llenado 6) Indicador Instrucciones Use la tecl a Up (arriba) o la tecla Do wn (abajo) para camb iar .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 71 Seguridad Hoja de trabajo de pr ogramaci ó n de ciclos Hoja de trabajo de program aci ó n de cicl os Progr ama Pr ela v ado La v a do Ciclo T iempo (min) T iempo (min) Nombre Agua Agua Ni v el N i v el Suminis tro Sumin istro Te m p .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 72 F232073 (SP) T abl as de cic los de la computadora serie S Cic los est á ndar de la computadora serie S Program.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 73 Seguridad Llenado 3 T i e m p o ( m i n ) 000020 Agua --- --- --- - -- calien te - -- Ni vel --- --- --- - -- alto --- Sumini stro --- --- --- --- 0 --- T emp. (F) --- --- --- --- 0 --- Centrif.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 74 F232073 (SP) T abl as de cic los de la computadora serie S (contin uaci ó n) Cic los est á ndar de la computad.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 75 Seguridad Llenado 3 T i e m p o ( m i n ) 200300 Agua tibia --- --- caliente --- --- Ni vel alto --- --- alto --- --- Sumini stro 0 --- --- 0 --- --- T emp. (F) 0 --- --- 0 --- --- Centrif.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 76 F232073 (SP) T abl as de cic los de la computadora serie S (contin uaci ó n) T ablas de ci clos en bl anco de la computadora serie S (conti nua ci ó n) P r o g r a m a 1 31 41 51 61 71 8 Pr el avad o Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 77 Seguridad Llenado 3 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif. (se g) Llenado 4 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 78 F232073 (SP) T abl as de cic los de la computadora serie S (contin uaci ó n) T ablas de ci clos en bl anco de la computadora serie S (conti nua ci ó n) P r o g r a m a 1 92 02 12 22 32 4 Pr el avad o Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 79 Seguridad Llenado 3 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif. (se g) Llenado 4 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 80 F232073 (SP) T abl as de cic los de la computadora serie S (continuaci ó n) T ablas de ci clos en bl anco de la computadora serie S (conti nua ci ó n) P r o g r a m a 2 52 62 72 82 93 0 Pr el avad o Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p .
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT F232073 (SP) 81 Seguridad Llenado 3 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif. (se g) Llenado 4 Ti e m p o ( mi n ) Agua Ni vel Suminis tro Te m p . ( F ) Centrif.
© Copyright, Alli ance Laundr y Systems LLC – DO N O T COPY or TRANSMIT Seguridad 82 F232073 (SP) Notas.
An important point after buying a device Alliance Laundry Systems UC80PN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems UC80PN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems UC80PN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems UC80PN you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems UC80PN will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems UC80PN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems UC80PN.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems UC80PN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems UC80PN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
