Instruction/ maintenance manual of the product 4500 Eureka
Go to page of 20
Index Important Safeguards ........... 2 Service Information ............... 4 Assembly ........................... 5-6 Use ........................................ 7 Thermal Cut Of f .............. 4 & 7 Accessories ........................... 8 Cyclonic Cassette .
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ T OUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
5 HOW TO ASSEMBLE CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. CAUTION: Assemble the cleaner before using. NOTE: Features may vary by model yet all parts assemble the same. 1. Install the hose. Locate the tab on the hose adapter (shortest end).
6 Cord Hook Step E Store Electrical Cord Dusting Brush T elescoping W and Crevice T ool Carrying Handle Hose Retainer Upholstery T ool Step D Store Hose and Accessories 1. Wind the cord around the two cord hooks on the left side of cleaner . T urn the upper cord hook down to release the cord.
14 Obtain replacement filters from a local dealer or order them from The Eureka Company , Bloomington, IL. Motor Filter Check the motor filter each time you empty the cyclonic cassette. Clean or replace as needed. T o Clean Motor Filter 1. Remove cyclonic cassette from unit.
8 How T o Use Accessories NOTE: Do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using accessories. 1. Remove hose from rear of cleaner . 2. Place desired accessory onto end of hose or wand.
T o Change Cassette Micron Filter: NOTE: T urn off the switch and unplug the electrical cord before changing the Cassette Micron Filter . Never operate the vacuum cleaner without the cyclonic cassette or the filter . Remove cyclonic cassette by pushing up lever (1) , unhooking (2) by swinging outward from vacuum body .
10 HOW T O MAINT AIN (continued) Brush Roll The brush roll turns as it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues brushing the carpet. T o maintain the most efficient cleaning, the bristles must touch the carpet.
11 5. Place new belt around motor pulley . Left side view 6. Place belt around brush roll. 7. Align left end cap with square in base. Push end cap into place; see left side view . 8. Pull right side of brush roll to stretch belt. Secure right end cap into base.
12 How to Check and Clear Hose Blockages Low suction or poor pickup may be due to a blockage in the vacuum cleaner . 1. Remove hose and check suction at end of hose - if little or no suction, check cyclonic cassette. Empty if needed. If no improvement proceed to Step 2.
13 Handle Release 1. Remove the attachment hose from the lower hose retainer and look into the hose retainer for any obstructions. Proceed to Step 2 to check for any other blockages. 4. Check for blockages in the brush roll area and remove any obstructions found there.
14 Obtain replacement filters from a local dealer or order them from The Eureka Company , Bloomington, IL. Motor Filter Check the motor filter each time you empty the cyclonic cassette. Clean or replace as needed. T o Clean Motor Filter 1. Remove cyclonic cassette from unit.
15 5 Use 15 watt replacement light bulb, part number 48815. How T o Change Light Bulb (only for models with a headlight) NOTE: T urn off the power switch and disconnect the electrical cord before changing light bulb. 3 4 1 1. Remove two screws from lens cover .
16 Motor will not start. Electric Plug Push plug securely into outlet. T ry another outlet. Check circuit breaker . Motor suddenly stops. Thermal Cut Of f Refer to page 7. Does not clean the carpet Filters Clean or replace the filter(s). Hint: If picking up fine or floor .
Genuine Eureka Belts and Filters Belts (style U) - Extended Life, package of 2 61 120 2.99 Motor Filter , package of 2 61333 1.99 HEP A Filter 60285B 19.99 Cyclonic Cassette Micron Filters, package of 2 60696 3.99 Pet Stain & Odor Remover 60933 3.
.
19 THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of two years. The warranty is granted only to the original purchaser and members of his or her immediate household.
©1999 White Consolidated Industries, Inc. Printed in U.S.A. Part No. 70483A (2/01) Thank you for selecting a Eureka cleaner . 1 telescoping wand 1 crevice tool Assembly Items in This Carton Don’t F.
An important point after buying a device Eureka 4500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Eureka 4500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Eureka 4500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Eureka 4500 you will learn all the available features of the product, as well as information on its operation. The information that you get Eureka 4500 will certainly help you make a decision on the purchase.
If you already are a holder of Eureka 4500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Eureka 4500.
However, one of the most important roles played by the user manual is to help in solving problems with Eureka 4500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Eureka 4500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
