Instruction/ maintenance manual of the product SWD447C Alliance Laundry Systems
Go to page of 144
Installation/Operation www .comlaundry .com Stack ed W asher and Dryer Metered Electric and Gas Models SWD446C NOTA: El manual en español aparece después del manual en inglés. Part No. 801539R3 July 2005 K eep These Instructions for Futur e Reference.
.
801539 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT IMPOR T ANT : Purchaser must consult the local gas supplie r f or suggested instructions to be fo llowed if the unit user smells gas.
2 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notes.
© Copyright 2005, Alliance Laundry Systems LLC All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in any form or by an y means without the e xpressed written consent of the publisher . 801539 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Ta b l e o f Contents Replacement Parts .
4 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Water Supply Requirements ................................. ................................ 40 Water Temperature ............... .................................... ....
801539 5 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Instructions for NetMaster Dryers ....................................... 59 Step 1: Clean Lint Filter ..................... ................................ ...
6 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notes.
7 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Replacement P ar ts If replacement parts are requ ired, conta ct the source from which you purcha sed your unit or contact: Alliance Laundry Systems Shepard Str eet P. O .
801539 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notes.
9 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safe ty Inf ormation Explanation of Safet y Messages Throughout this manual and on machine decals, you will find precauti onary statements (“D ANGER, ” “W ARNING, ” and “CA UTIO N”) follo wed by specific instructions.
Sa fet y I nfor ma ti on 801539 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7. Do not reach into the washer or dryer if the cylinders are re volving. 8. Do not install or store the unit where it will be exposed to water and/or weather .
Safety Information 11 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 28. Remove laundry immediately after the dryer stops. 29. Always read and follo w manufacturer’ s instructions on package s of laundry and cleaning aids.
801539 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notes.
13 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation Non-Gravity Drain Models NO TE: Side and rear exh aust openings are 4 inch (10.2 cm) ducting . Gas models cannot be vented out left side of cabinet because of bur ner housing.
Installation 801539 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NO TE: Side and rear exh aust openings are 4 inch (10.2 cm) ducting .
Installation 15 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Gravity Drain Models NO TE: Side and rear exh aust openings are 4 inch (10.2 cm) ducting . Gas models cannot be vented out left side of cabinet because of bur ner housing.
Installation 801539 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Bef ore Y ou Star t T ools For most installations, the basic tools you will need are: Figure 1 Wa t e r W asher needs two standard 3/4 inch (19.1 mm) water supply faucets with a pressu re between 20 and 120 pounds per square inch (138 to 827 kPa).
Installation 17 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installing the Unit Step 1: P osition Unit Near Installation Area NO TE: If the unit is delivered on a col.
Installation 801539 18 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Thread hose coupling s onto va lve con nec tion s f inger - tight, then approximately 1/4 tur n with pliers. DO NO T cross thread or ov ertighten couplings. T urn water on and check for leaks.
Installation 19 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 3: (Non-Gravity Drain Models Onl y) Connect Drain Hose to Drain Receptacle Remov e the drain hose from its shipping position on the rear of the washer b y removing the shipping tape.
Installation 801539 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 4: (Gravity Drain Models Onl y) Connect Drain Outlet to Drain System Remov e drain fitting and hose clamp from accessories bag, and clamp fitting onto drain outlet.
Installation 21 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 9 D434I 1 New Stainless Steel Flexib le Connector – Use only if allowed b y local codes (Use Design A.G.A. Cer tified Connector) 4 Black Iron Pipe Shorter than 20 ft.
Installation 801539 22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 6: (Electric Dryer Only) Connect Electrical Plug For further assistance, refer to section on Electrical Requirements . IMPOR T ANT : Use only a new U .L.
Installation 23 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 7: Connect Dryer Exhaust System For further assistance, refer to sections on Location Requirements and Dryer Exhaust Requirements . ● DO NO T use plastic or thin foil ducting.
Installation 801539 24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 8: P osition and Level the Unit Place unit in position on a solid, sturdy and le vel floor . Installing the unit on an y type of carpeting, soft tile, pedestal, a platfo rm or other weakly supported structures is not recommended.
Installation 25 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 9: (W asher Only ) Remove the Shoc k Sleeves and Shipping Brace Remov e front access panel by removing the tw o screws. Remov e bolts and lockwashers from shipp ing brace with 9/16 inch wrench and remov e brace.
Installation 801539 26 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 11: Plug In the W asher and Dryer Refer to sections on Electrical Requirements and connect th e wa sh er a nd dr y er t o a n el ec t ri c al pow e r source.
Installation 27 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Heat Source Chec k Electric Dryers Close the loading door and start the dryer in a heat setting (refer to Operation section). After dryer has operated for three minutes, the exhaust air or e xhaust pipe should be warm.
Installation 801539 28 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Requirements W a sher (120 V olt, 60 Hertz with 3-Prong Grounding Plug) NO TE: The wiring diagram is located behind the contr ol panel, inside the contro l cabinet.
Installation 29 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 23 DO NO T OPERA TE O THER APPLIANCES ON THE SAME CIRCUIT . DO NO T O V ERLO AD CIRCUITS! Do not operate both a washer and gas dryer on the same circuit.
Installation 801539 30 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT ● If branch circuit to dryer is 15 feet (4.50 m) or less in length, use U.L. (Underwriters La bor at ori es) listed No. 10 A.W .G. wire (copper wire only), or as required by local codes.
Installation 31 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Connection Three-Wire P ower Cor d 1. Remov e the screw and terminal block acces s cov er from the rear of the dryer cabinet. 2. Insert ends of direct wire thro ugh power supply hole (containing proper strain relief) in rear of dryer cabinet.
Installation 801539 32 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Three-Wire Connection Figure 26 D682I 1 “L1” T er minal 7 Neutral (White or Center Wire) 2 Ground to N.
Installation 33 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Four-Wire P ower Cor d IMPOR T ANT : Use only a U .L. listed No. 10 A.W .G. (copper wir e only) four conductor po wer supply cord kit rated 240 V olts (minimum) 30 Amperes and labeled as suitable f or use in a clothes dryer .
Installation 801539 34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 27 D815I 1 T ypical Four-Wire Receptacle 2 Four-Wir e P ower Cord (Not supplied with dr yer) 3 Stra.
Installation 35 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Four-Wire Connection Figure 28 D683I 1 Ground Wire 8 Neutral (White Wire) 2 White Wires 9 Strain Relief 3 .
Installation 801539 36 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Requirements Gas Dryer (120 V olt, 60 Hertz, with 3-Pron g Grounding Plug) NO TE: The wiring diagram is located behind the contr ol panel, inside the contro l cabinet.
Installation 37 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 30 Grounding Instructions ● The dryer must be grounded. In the ev ent of malfunction or breakdo wn, grounding will reduce the risk of electric shock by pro viding a path of least resistance for electric current.
Installation 801539 38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Gas Requirements (Gas Dryers) NO TE: The gas service to a gas dryer must co n for m with the local codes and ordinances or , in the absence of local codes and ordinances, with the latest edition of the National Fuel Gas Code ANSI Z223.
Installation 39 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 31 D434I 1 New Stainless Steel Flexib le Connector – Use only if allowed b y local codes (Use Design A.G.A. Cer tified Connector) 4 Black Iron Pipe Shorter than 20 ft.
Installation 801539 40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT W ater Supply Requirements NO TE: W ater supply faucets must f it standard 3/4 inch (19.1 mm) female garden h ose couplings. DO NO T USE SLIP-ON OR CLAMP-ON CONNECTIONS.
Installation 41 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Location Requirements Select a location with a solid, sturdy and le vel floor . DO NO T install unit on carpeting, soft tile, pedestal, a platform or other weakly supported structures.
Installation 801539 42 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Dryer Exhaust Requirements Exhaust System Materials Exhaust system materials are not supplied with the unit. Exhaust duct must be 4 inches (10.2 cm) in diameter having no obstructions.
Installation 43 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Make-Up Air Requirements It is important that the laundry room has adequate make-up air for the dryer(s). A dryer e xhausts 220 cfm (measured at bac k of the dryer) and suf ficient make-u p air must be supplied to repl ace the air exhausted by the dryer .
Installation 801539 44 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Exhaust System IMPOR T ANT : Keep exhaust duct as short as possible. NO TE: Be certain old ducts ar e cleaned bef ore installing y our new unit. For best dryin g results, recommended maximum length of e xhaust system is shown in Ta b l e 3 .
Installation 45 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Exhaust System Maintenance The dryer interior an d the complete exhaust system should be inspected after one year of use and cleaned if necessary . Inspect and clean exhau st duct ev ery one to two years as required th ereafter .
Installation 801539 46 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Multi-Dryer Installation Exhaust Requirements F igur e 39 sho ws a typical example of a multiple dryer installation. Note how each dryer has its o wn exhaust system vented to the central e xhaust duct.
Installation 47 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 40 Figure 41 H318I 1 NO TE: Where the exhaust duct pierces a combustib le wall or ceiling, the op ening must be sized per local codes .
Installation 801539 48 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Lint Filter CLEAN THE LINT FIL TER BEFORE DR YING EA CH LO AD.
49 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Operation Instructions f or MDC W ashers IMPOR T ANT : Prior to f irst wash, use an all- purpose cleaner , or a detergent and water solution, and a damp cloth to remov e shipping dust from inside of washer drum.
Operation 801539 50 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 3: Add Laundry Supplies Open dispenser drawer . Measure and add low sudsing detergent (1), bleach (2) and fa bric softener (3) to the dispenser drawer . Refer to Fi g u re 4 5 .
Operation 51 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 6: Inser t Coin(s) or Car d T o Inser t Money Insert coin(s) in coin slot . Check pricing as seen on digital display . Figure 48 T o Inser t Card Insert card into opening.
Operation 801539 52 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Indicator Lights WA S H WA S H is lit at the beginning of a W ash cycle and will remain lit until the W ash cycle is complete. RINSE RINSE is lit at the beginning of the Rinse or Extra Rinse cycle and will remain lit until the Rinse cycle is completed.
Operation 53 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Instructions f or NetMaster W ashers IMPOR T ANT : Prior to f irst wash, use an all- purpose cleaner , or a detergent and water solution, and a damp cloth to remov e shipping dust from inside of washer drum.
Operation 801539 54 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 4: Determine Proper Contr ols for W a sher The direction of the arrow indicates which controls are for the washer . Figure 54 Step 5: Set Fabric Selector Push ke ypad for NORMAL , PERM PRESS or DELICA TES cycle.
Operation 55 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT T o Inser t Card Insert card into opening. DO NO T remove the card until the REMO VE CARD LED is lit. Figure 58 Step 8: Star t W asher After vend price has been satisf ied, push the ST AR T ke ypad.
Operation 801539 56 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Instructions f or MDC Dryer s IMPOR T ANT : Befor e using dryer fo r the first time, use an all-purpose cleaner , or a detergent and water solution, and a damp cloth to remov e shipping dust fr om inside of dryer drum.
Operation 57 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 4: Determine Proper Contr ols for Dryer The direction of the arrow indicates which controls are for the dryer . Figure 63 Step 5: Set Fabric Selector Select HIGH TEMP , MED TEMP , LO W TEMP or DELICA TES by pushing keypad.
Operation 801539 58 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 7: Star t Dryer T o start dryer , push ST AR T ke ypad. T o stop dryer at any time, open the door . T o restart the dryer , close door and push ST AR T keyp ad.
Operation 59 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Instructions f or NetMaster Dryers IMPOR T ANT : Befor e using dryer fo r the first time, use an all-purpose cleaner , or a detergent and water solution, and a damp cloth to remov e shipping dust fr om inside of dryer drum.
Operation 801539 60 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 4: Determine Proper Contr ols for Dryer The direction of the arrow indicates which controls are for the dryer . Figure 71 Step 5: Set Fabric Selector Select HIGH TEMP , MED TEMP , LO W TEMP or NO HEA T by pushing ke ypad.
Operation 61 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Step 7: Star t Dryer T o start dryer , push ST AR T ke ypad. T o stop dryer at any time, open the door . T o restart the dryer , close door and push ST AR T keyp ad.
801539 62 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notes.
63 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance User -Maintenance Instructions Lubrication All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary .
Maintenance 801539 64 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Exhaust System The exhaust du ct should be inspected after one year of use and cleaned if necessa ry by a qualif ied service person to remov e any lint b uild-up.
Maintenance 65 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Bef ore Y ou Call f or Ser vice Y ou may save time and money by checking the follo wing: If the W asher: If.
Maintenance 801539 66 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT If Service Is Required If service is required, contact the nearest Factory Authorized Ser vice Center .
Maintenance 67 801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Inf ormation for Hand y Reference Alliance Laundry Systems Shepard Street P .
.
Instalación/Operación www .comlaundry .com La v adora y secadora de montaje v ertical con contador de monedas Modelos eléctricos y a gas SWD446C Pieza No. 801539R3 Julio 2005 Guarde estas instrucciones para refer encia en el futuro. (Si la unidad cambia de dueño, asegúrese de que este manual v aya con la misma).
.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801539 (SP) 71 IMPOR T ANTE: El comprador debe cons ultar a la compañía local de gas acer ca de los pasos a seguir en caso de que el usuario de la u nidad detecte olor a gas.
72 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notas.
© Copyright 2005, Alliance Laundry Systems LLC Reserv ados todos los derechos. Ninguna sección del presen te manual puede ser reprod uc ida o transmitida en forma alguna o a tra vés de ningún medio sin el e xpreso consentimiento por escrito del editor .
74 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos de suministro de agua ....... ............................... ................... 111 Temperatura del agua ....................................... .......
801539 (SP) 75 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Paso 3: Cierre la puerta de carga................................... ................... 132 Paso 4: Determine los controles ap ropiados para la secadora ......... 133 Paso 5: Selección de la temperat ura conforme a los tejidos .
76 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notas.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 77 801539 (SP) Piezas de repuesto Si requiere piezas de repuesto , póngase en contacto con el establecimiento dond e adquirió la máquina o con: Alliance Laundry Systems Shepard Str eet P.
801539 (SP) 78 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notas.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 79 801539 (SP) Inf ormación de seguridad Explicación de los mensajes de seguridad En este manual y en las calcomanías de la m.
Informa ción de seguridad 801539 (SP) 80 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7. No introduzca la mano en la la vadora o la secadora si los cilindros están en movimiento. 8. No instale ni coloque la unidad en un lug ar donde esté expuesta al agua o a la intemperie.
Informac ión de seguridad 81 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 28. Una vez que la secadora se detenga, saque la ro pa inmediatam ente. 29 . Lea y siga siempre las instrucciones del f abricante que aparecen en los paquetes de productos para la vado y limpieza.
801539 (SP) 82 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Notas.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 83 801539 (SP) Instalación Modelos con desagüe sin gravedad NO T A: Las aberturas ubicadas por las partes lateral y trasera son para ductos de 4 plg (1 0.
Instalaci ón 801539 (SP) 84 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NO T A: Las aberturas ubicadas por las partes lateral y trasera son para ductos de 4 plg (1 0.2 cm). Los modelos a gas no pued en ventilarse por el lado izquierdo del gabinete porque allí se encuentra el alojamiento del quemador .
Instalació n 85 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Modelos de desagüe por gravedad NO T A: Las aberturas ubicadas por las partes lateral y trasera son para ductos de 4 plg (1 0.
Instalaci ón 801539 (SP) 86 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Antes de comenzar Herramientas Éstas son las principales he rramientas qu e necesitará en la mayoría de las instalaciones: Figura 1 Agua La la vadora trabaja con dos grifos estándar de 3/4 plg (19.
Instalació n 87 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Instalación de la unidad P aso 1: Coloque la unidad cerca del área de instalación NO T A: Si la u.
Instalaci ón 801539 (SP) 88 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT IMPOR T ANTE: Enrosque a mano las uniones en las conexiones de válvula y seguidamente g ir e aproximadamente un 1/4 de vuelta con la ayuda de un alicate.
Instalació n 89 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 3: (Unicamente modelos con desagüe sin gra vedad ) Conecte la manguera de desagüe en el receptáculo de desagüe Saque la manguera del lugar de embarqu e en la parte trasera de la la vadora, retir ando la cinta de embarque.
Instalaci ón 801539 (SP) 90 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 4: (Únicamente modelos con desagüe por gra vedad) Conecte la salida del desagüe al sistema de desa güe Saque el empalme de desagüe y la abrazadera para manguera de la bolsa de ac cesorios, y asegure el empalme a la salida de drenaje.
Instalació n 91 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figura 9 D434I 1 Nuev o conector flexib le de acero inoxidable – úselo sólo si lo autor izan las normas locale s (utilice un con ector con diseño cer t ificado por A.
Instalaci ón 801539 (SP) 92 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 6: (Sólo par a secadoras eléctricas) Conecte el enchuf e de suministr o de energía eléctrica Remítase a la sección de Requisitos eléctricos para obtener más información.
Instalació n 93 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 7: Conecte el sistema de escape de la secadora Remítase a las secciones de Requisitos del lugar y Requisitos del sistema de escape de la secadora para obtener una mayor orien tación.
Instalaci ón 801539 (SP) 94 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 8: Coloque la unidad en su lugar y nivélela Coloque la unidad en un piso sóli do, resistente y nivelado.
Instalació n 95 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 9: (Sólo para la v adoras) Saque los manguitos de amor tiguador y el tirante sujetador Desmonte el panel de acceso frontal sacando los dos tornillos.
Instalaci ón 801539 (SP) 96 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 10: Limpie el interior de los tambores de la lav adora y la secadora Antes de utilizar la lav .
Instalació n 97 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 12: Revise la instalación Remítase a la Lista de comprobación del insta lador que aparece en la contraportada y as egú rese de que la unidad esté correcta mente instalada.
Instalaci ón 801539 (SP) 98 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Revisión de la fuente de calor Secadoras eléctricas Cierre la puerta de carg a y arranque la secadora en un programa de calor (cons ulte la sección de Operación ).
Instalació n 99 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos eléctricos Lav adora (Enchufe de tres terminales de 120 voltios, 60 Hertzios, con conexión a tierra) NO T A: El diagrama de cableado se encuentra detrás del panel de contr ol, dentr o del gabinete de control.
Instalaci ón 801539 (SP) 100 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Figura 23 NO USE O TR OS AP ARA TOS ELECTR O- DOMÉSTICOS EN EL MISMO CIRCUIT O. ¡NO SOBRECARGUE LOS CIRCUITOS! No haga funcionar la la vadora y la secadora simultáneamente si están conectadas al mismo circuito.
Instalació n 101 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT ● Si el circuito secundario al que se conecta la secadora tiene una longitud de 15 pies (4.5 metros) o menos, utilice cable calibre 10 A WG en lista de U.
Instalaci ón 801539 (SP) 102 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Conexión eléctrica Cordón de alimentación de tres conductores 1. Saque el tornillo y la cu bierta de acceso de la parte posterior del gabinete de la secadora.
Instalació n 103 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Conexión de tres conductores Figura 26 D682I 1 Conexión “L1” 8 Protector contra tirones (no s.
Instalaci ón 801539 (SP) 104 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Cordón de alimentación de cuatr o conductores IMPOR T ANTE: Utilice solamente un cordón de suministro de energía eléctrica, en lista de U .
Instalació n 105 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figura 27 D815I 1 Receptáculo común de cuatro ter minales 2 Cordón de alimentación (cuatro cond.
Instalaci ón 801539 (SP) 106 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Conexión de cuatr o conductores Figura 28 D683I 1 Conductor de co ne xión a tierra 8 Neutral (co.
Instalació n 107 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos eléctricos Secadoras a gas (Enchufe de tierra de tr es terminales de 120 voltios, 60 Hertzios) NOT A : E l diagrama de cableado se encuentra de trás del panel de control, dentr o del gabinete de control.
Instalaci ón 801539 (SP) 108 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Figura 30 Instrucciones de conexión a tierr a ● La secadora tiene que conectarse a tierra.
Instalació n 109 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos de la fuente de suministr o de gas (Secadoras a gas) NO T A: El servicio de gas para las.
Instalaci ón 801539 (SP) 110 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Figura 31 D434I 1 Nuev o conector flexib le de acero inoxidable – úselo sólo si lo autor izan las normas locale s (utilice un con ector con diseño cer t ificado por A.
Instalació n 111 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos de suministr o de agua NOT A: Los grif os de suministro de agua deben entrar en uniones hembra estándar de 3/4 plg (19.1 mm) para mangueras de jard ín.
Instalaci ón 801539 (SP) 112 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Requisitos del lugar Seleccione una ubicación con un piso sólido, resistente y nivelado. No instale la un idad sobre alfombras, baldosas blandas, pedestales, un a plataforma u otra superficie con apoyo d ébil.
Instalació n 113 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Requisitos del sistema de escape de la secadora Materiales del sistema de escape Los materiales del sistema de escape no se suministran con la unidad.
Instalaci ón 801539 (SP) 114 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Requisitos de ai re de reposición Es importante que la sala de lav andería cuente con suficiente aire de reposición para la(s) secadora(s).
Instalació n 115 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Sistema de escape IMPOR T ANTE: Mantenga el ducto de escape lo más corto posible. NO T A: Asegúrese de que los ductos viejos sean limpiados antes de instalar la secadora nueva.
Instalaci ón 801539 (SP) 116 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Mantenimiento del sistema de escape Después de utilizar la secad ora durante un año, debe inspeccionarse el interior de la misma y el sistema de escape y limpiarlos si es necesario.
Instalació n 117 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Instalación de múltiples secadoras requisitos de es cape La F igura 39 muestra un ejemplo típico de una instalación de secadoras múltiples. Note que cada secadora cuenta con su pr opio sistema de escape que se enruta al ducto central de escape.
Instalaci ón 801539 (SP) 118 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Figura 40 Figura 41 H318I 1 NO T A: Donde e l ducto de escape atraviese una pared de material combustible o techo interior , el tamaño de la aber tura deberá satisfacer las normas locales.
Instalació n 119 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Filtr o de pelusa LIMPIE EL FIL TRO DE PE LUSA ANTES DE SECAR CAD A CARGA DE R OP A. (Consulte la F igura 42 para determinar la lo calización del f iltro de pelusa).
801539 (SP) 120 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Notas.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 121 801539 (SP) Operación Instrucciones para la operación de lav adoras MDC IMPOR T ANTE: Antes del primer la vado, use un limp.
Operación 801539 (SP) 122 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT P aso 3: Agregue lo s suministros para lav ar Abra la gav eta del surtidor . Mida y agregue deter gente de baja espuma (1), blanqu eador (2) y suavizador de tela (3) a la ga veta del surtidor (consulte la F igura 45 ).
Operación 123 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 6: Insert e la(s) moneda(s) o la tarjeta P ara inser tar monedas Coloque la(s) moneda(s) en el tragamonedas. Compruebe el precio que aparece en la pantalla digital.
Operación 801539 (SP) 124 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Luces indicadoras W ASH (LA V ADO) Esta luz se enciende al prin cipio de un ciclo de lav ado y permanece en c en d i da h a st a c om p l et a r se e l ci c l o d e la vado.
Operación 125 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Instrucciones para la operación de lav adoras NetMaster IMPOR T ANTE: Antes del primer la vado, use u.
Operación 801539 (SP) 126 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT P aso 3: Agregue lo s suministros para lav ar Abra la gav eta del surtidor . Mida y agregue deter gente de baja espuma (1), blanqu eador (2) y suavizador de tela (3) a la ga veta del surtidor (consulte la F igura 53 ).
Operación 127 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 6: Seleccione la temperatura de lav ado Seleccione HO T (caliente), WA R M (tibia) o COLD (fría).
Operación 801539 (SP) 128 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Luces indicadoras W ASH (LA V ADO) Esta luz se enciende al prin cipio de un ciclo de lav ado y permanece en c en d i da h a st a c om p l et a r se e l ci c l o d e la vado.
Operación 129 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Instrucciones de funcionamiento de las secadoras MDC IMPOR T ANTE: Antes del primer secado, use un lim.
Operación 801539 (SP) 130 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT P aso 4: Determ ine los controles apropiados para la secadora La dirección de la flecha indica cuáles controles corresponden a la se cadora.
Operación 131 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 7: Puesta en marcha de la secadora Para poner en marcha la sacadora, oprima la tecla ST AR T (arranque). Para detener la secadora en cualquier momento, abra la puerta.
Operación 801539 (SP) 132 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Instrucciones de funcionamiento de las secador as NetMaster IMPOR T ANTE: Antes del primer secado, us.
Operación 133 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT P aso 4: Determ ine los controles apropiados para la secadora La dirección de la flecha indica cuáles controles corresponden a la se cadora.
Operación 801539 (SP) 134 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT P aso 7: Puesta en marcha de la secadora Para poner en marcha la sacadora, oprima la tecla ST AR T (arranque). Para detener la secadora en cualquier momento, abra la puerta.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 135 801539 (SP) Mantenimiento Instrucciones de mantenimiento para el usuario Lubricación T odas las piezas móviles están selladas con un suministro permanen te de lubricante o equipad as con rodamientos que no necesitan aceite.
Mantenimiento 801539 (SP) 136 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Cuidado de la secadora Saque las pelusas del f iltr o después de secar cada carga de ropa. Si es necesario, puede lav ar el filtro. Saque una vez el año el filtro de pelusa y el torni llo, y limpie el área que está abajo con una aspiradora.
Mantenimiento 137 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Antes de llamar para solicitar servicio de reparación Puede ahorrar tiempo y dinero realizando la .
Mantenimiento 801539 (SP) 138 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Si la unidad necesita servicio Si la unidad necesita se rvicio, comuníquese con el centro de servicio de fábr ica autorizado más cercano.
Mantenimiento 139 801539 (SP) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Inf ormación de referencia Alliance Laundry Systems Shepard Street P .
801539 (SP) 140 © Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Notas.
.
Installer Chec klist F ast T rack f or Installing the Stacked W asher and Dryer (Ref er to the manual f or more detailed information) Lista de compr obación del instalador Guía rápida para instalar.
An important point after buying a device Alliance Laundry Systems SWD447C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems SWD447C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems SWD447C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems SWD447C you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems SWD447C will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems SWD447C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems SWD447C.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems SWD447C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems SWD447C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center