Instruction/ maintenance manual of the product ADA35 Essick Air
Go to page of 16
Circle the model of your cooler and record the serial number below . Read Carefully All Of This Manual Before Installing The Unit Encierrre con un circulo el modelo de su enfriador y escribe el número de série abajo. Lea Con Cuidado T odo Este Manual Antes De Instalar La Unidad Serial # Número De Série Safety Rules 1.
2 1 10498-2 Electrical Installation W ARNING: Disconnect all electrical service that will be used for this unit befor e you begin the installation. • Remove junction box. The elec- trical junction box is located in the upper inside of the left center post.
3 1 10498-2 will protect you from someone turning on unit while you are working inside. This should be done for your safety . Adjust pulley to a larger diameter and readjust belt tension, plug motor in, install inspection panels, and retest amperage draw .
4 1 10498-2 • Check belt tension. A 3 lb. force should de fl ect the belt 3/4 inches (see Fig. 1 1). Readjust belt if needed. • Oil bearings. The blower bearings and cooler motor in this unit should be oiled with a few drops of non-detergent 20/30 weight oil once each year .
5 1 10498-2 Limited W arranty This warranty is extended to the original purchaser of an evaporative cooler installed and used under normal conditions. It does not cover damages in- curred through accident, neglect, or abuse by the owner .
6 1 10498-2 No. N° Description / Descripción ADA35 ASA35 1. T op, Blower Section / T apa De La Sección De La Rueda ...........................................................................222130-028 222130-028 2. T op, W et Section / T apa De la Sección De Agua .
7 1 10498-2 Parts Drawing / Dibujo De Piezas ADA35, ASA35.
8 1 10498-2 No. N° Description / Descripción ADA51 ADA51 12 ADA71 ADA71 12 1. T op, Cabinet / T apa De La Caja ......................................................................... 222130-070 222130-070 222140-053 222140-053 2. T op Access Panel / Panel Superior De Acceso .
9 1 10498-2 Parts Drawing / Dibujo De Piezas ADA51 / ADA51 12 ADA71 / ADA71 12.
10 1 10498-2 No. N° Description / Descripción ASA51 ASA51 12 ASA71 ASA71 12 1. T op, Cabinet / T apa De La Caja .....................................................................222130-070 222130-070 222140-053 222140-053 2. T op Access Panel / Panel Superior De Acceso .
11 1 10498-2 Parts Drawing / Dibujo De Piezas ASA51 / ASA51 12 ASA71 / ASA71 12.
12 1 10498-2 No. N° Description / Descripción AUA51 AUA51 12 AUA71 AUA71 12 1. T op, Cabinet / T apa De La Caja ......................................................................... 322130-071 322130-071 322140-054 322140-054 2. T op Access Panel / Panel Superior De Acceso .
13 1 10498-2 Parts Drawing / Dibujo De Piezas AUA51, AUA51 12, AUA71, AUA71 12 Lea Y Conserve Estas Instrucciones Reglas De Seguridad 1. Lea las instrucciones con cuidado. 2. Las conexiones eléctricas deben ser hechas por un electricista com- petente, para que todo el cableado eléctrico cumpla con los requisitos establecidos en su localidad.
14 1 10498-2 • Quite la caja de empalme. La caja de empalme se encuentra en el poste izquierdo central en la parte superior del interior del enfriador . Quite los dos tornillos de la caja y aparte la caja del panel para tener acceso al cableado (véase fi g.
15 1 10498-2 Puesta En Marcha En La Primavera • Limpie el medio evaporativo. Un fi ltro limpio es más absorbente y e fi - ciente y producirá un mayor volumen de aire frío. Cada año o cuando sea necesario, limpie con una manguera de jardín las aberturas.
16 1 10498-2 Preparar La Unidad Para El Invierno • Drene el agua. Drene siempre toda el agua de la unidad y del tubo de abas- tecimiento de agua cuando no use el enfriador durante períodos prolongados, especialmente al fi n de la temporada. El tubo debe quedarse desconectado del enfriador y del abastecimiento de agua para que no lo congele.
An important point after buying a device Essick Air ADA35 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Essick Air ADA35 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Essick Air ADA35 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Essick Air ADA35 you will learn all the available features of the product, as well as information on its operation. The information that you get Essick Air ADA35 will certainly help you make a decision on the purchase.
If you already are a holder of Essick Air ADA35, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Essick Air ADA35.
However, one of the most important roles played by the user manual is to help in solving problems with Essick Air ADA35. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Essick Air ADA35 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
