Instruction/ maintenance manual of the product G-0s Esoteric
Go to page of 12
Master Clock Generator Owner ’ s Manual G - 0s.
2 CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
3 Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 2 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Features Up to 192 kHz Wor d Sync clock pr oduction With the advent of digital equipment using higher sampling frequencies than ever, 176.4 kHz and 192 kHz word clocks (sync signals) are made available in addition to conventional 44.1 kHz, 48 kHz, 88.
5 Names of Each Control ST ANDBY/ON button When the Main Power switch on the rear panel is ON, use this button to turn the unit on or to standby. When the unit is on, the indicator lights. MASTER button Press this button to select the signal source you will use for the reference frequency.
.
7 WORD CLOCK OUT terminals These terminals output precise word synchronization signals. Connect these OUT terminals to the WORD SYNC IN terminals of the other digital equipment, using a commercially available BNC coaxial cable. < For other connections, read the instructions of each component you intend to use with this unit.
8 2 3 4 5 Set Up for Esoteric Units This is the recommended set up for synchronization with TEAC-ESOTERIC CD units: P-70, X-01, UX-1, P-01, D-01 Connect WORD CLOCK OUT terminals to WORD SYNC IN terminals of each unit using commercially available BNC coaxial cables.
9 Set Up for DVD Players, Universal Players, etc. 3 2 6 4 5 This is the recommended set up for synchronizing DVD players, D/A converters and other similar digital devices. Connect WORD CLOCK OUT terminals to word synchronization input terminals of your units, using commercially available BNC coaxial cables.
10 Dimmer T roubleshooting The front display can be dimmed to suit your preferred environment. There are two levels and an “off” setting. Press the A button for more than 2 seconds to switch the dimmer mode. LEd OFF 1: All the illuminations are turned off except the MASTER button indicator (Xtal, Rb, Ext).
11 Specifications Clock outputs 44.1 kHz lines . . . . . . . . . . . . . 44.1 kHz, 88.2 kHz, 176.4 kHz 48 kHz lines . . . . . . . . . . . . . . . . . . . 48 kHz, 96 kHz, 192 kHz PAL FILM lines . . . . . . . . . . 46.08 kHz, 92.1 6kHz, 184.32 kHz UNIVERSAL CLOCK lines .
1004 . MA-0945A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
An important point after buying a device Esoteric G-0s (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Esoteric G-0s yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Esoteric G-0s - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Esoteric G-0s you will learn all the available features of the product, as well as information on its operation. The information that you get Esoteric G-0s will certainly help you make a decision on the purchase.
If you already are a holder of Esoteric G-0s, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Esoteric G-0s.
However, one of the most important roles played by the user manual is to help in solving problems with Esoteric G-0s. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Esoteric G-0s along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
