Instruction/ maintenance manual of the product P232156R9 Alliance Laundry Systems
Go to page of 45
Basic Installation/Operation www .comlaundry .com W asher -Extractors Pocket Hardmount Part No. F232156R9 June 2010 Keep These Instructions for Futur e Reference.
.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Copyright 2010, Alliance Laundry Systems LLC All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher .
© Copyright, Alliance Laundry Systems LLC – D O NOT COPY or TRANSMIT F232156 2 Basic Installation/Op e ra ti on Safety Information Explanation of Safety Messages Precautionary statements (“DANGER,” “W ARNING ,” and “CAUTION”), followed by specific instructions, are found in this manual an d on machine decals.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 3 F232156 9. Do not install or store the washer where it will be exposed to water and/or wea t he r .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 4 IMPORT ANT : Ensure that the recommended clearances for inspection and maintena nce are provided. Never allow the ins pection and maintenance sp ace to be blocked.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 5 F232156 Operator Safety T o ensure the safety of machine operators, the following maintenance ch ecks must be performed daily: 1. Prior to operating the ma chine, verify that all warning signs are present and le gible.
© Copyright, Alliance Laundry Systems LLC – D O NOT COPY or TRANSMIT F232156 6 Basic Installation/Op e ra ti on Inst allation General Specifications UW UniLinc and M3 0 Control Models Refer to T able 1 . . Specifica tions 35 60 80 100 125 150 Overall Dimensions Overall width, in (mm) 33.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 7 F232156 T able 1 (continue d) Specif ications 35 60 80 100 125 150 W ash Cylinder Information Cylinder diameter , in (mm) 26 .25 (667) 32 (813) 36 (914) 36 (914) 42 (1067) 43 (1093) Cylinder depth, in (mm) 18.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 8 T able 1 (continue d) Specif ications 35 60 80 100 125 150 Direct Steam Heating (Optional) Steam inlet connection size, in (mm) 0.5 (13) 0.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 9 F232156 UW A-Control, V ariable-S peed Models Refer to T able 2 . . UW A V Pocket Hardmount General Specifications Spec ifications 35 60 80 100 125 Overall Dimensions Overall width, in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 10 T able 2 (continue d) UW A V Pocket Hardmount General Specifications Specifica tions 35 60 80 10 0 125 Drive T rain Information N u m b e r o f m o t o r s i n d r i v e t r a i n 11111 Drive motor power , hp (kW) 2.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 11 F232156 UW P-Control, V ariable-S peed Models Refer to T able 3 . . UWPV Models Specifications 35 60 80 100 1 25 150 Overall Dimensions Overall width, in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 12 T able 3 (contin ued) UWPV Models Specification s 35 60 80 100 125 150 Cylinder Sp eeds / Centrifugal Force Dat a 1/2 W ash/reverse, RPM / g 26 / .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 13 F232156 UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control Refer to T able 4 . . UW 2 Speed Models UW35 UW60 Overall Dimensions Overall width, in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 14 T able 4 (continue d) UW 2 Speed Models UW35 UW60 Drive T rain Information Number of motors in drive train 1 1 W ash/reverse motor power , HP (kW) 0.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 15 F232156 UW 3 Speed Models with P-Control or S-Control Refer to T able 5 . UW 3 Speed Models UW35 UW60 Overall Dimensions Overall width, in. (mm) 32- 1/2 (826) 36-5/8 (930) Overall height, in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 16 T able 5 (continue d) UW 3 Speed Models UW35 UW60 Power Consum ption A verage power used per cycle, kWh 0.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 17 F232156 UniLinc and M30 Control Models Dimensional Clearances Allow a min imum of 24 inch es (60 cm) at th e rear a nd 6 inches (45 cm) at the sides for maintenance, inspection, and adjustment.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 18 PHM770N 1 External Supply Control Mounting Bracket 9 W ater Inle t V alves (Models .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 19 F232156 PHM736N 1 External Supply Control Mounting Bracket 8 Basket Jog Buttons (Models throug.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 20 UW A V Models Dimensional Clearances Allow a min imum of 24 inch es (60 cm) at th e rear a nd 18 inches (45 cm) at the sides for maintenance, inspection, and adjustment.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 21 F232156 Figure 3 PHM623N 1 Supply V alve Box 5 Power Input Area (Inside) 2 Supply Dispenser 6 .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 22 UWPV Models Dimensional Clearances Allow a min imum of 24 inch es (60 cm) at th e rear a nd 18 inches (45 cm) at the sides for maintenance, inspection and adjustment.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 23 F232156 PHM387N 1 Supply V alve Box 7 Power Input Area (Inside) 2 Supply Dispenser 8 S team Co.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 24 PHM603N 1 Supply V alve Box 6 W ate r Inlet V alves 2 Supply Dispenser 7 Power Inpu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 25 F232156 UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control Dimensional Clearances Allow a minimum of 24 inches (60 cm) at the rear , and 18 inches (45 cm) at the sides for maintenance, inspection and adjustment.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 26 Figure 6 P032I 1 Supply V alve Box 5 W ate r Inlet V alves 2 Supply Dispenser 6 Pow.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 27 F232156 UW 3 Speed Models with P-Control or S-Control Dimensional Clearances Allow a min imum of 24 inch es (60 cm) at th e rear a nd 18 inches (45 cm) at the sides for maintenance, inspection, and adjustment.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 28 Figure 7 P032I 1 Supply V alve Box 5 S team Connection (Optional) 2 Supply Dispense.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 29 F232156 Basic Inst allation/Operation Operation UW Models With UniLinc Control 1. When display shows the Cycle Menu Screen washer-extractor is ready to be loaded with laundry .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 30 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to pr event drain blockage.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 31 F232156 UW Models With M30 Control 1. When display shows a cycle number , the washer- extractor is ready to be loaded with laundry . 2. Press the STOP/UNLOCK button located on the control.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 32 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to pr event drain blockage.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 33 F232156 Models Equipped with Both Steam and Electric Heating (UniLinc an d M30 Controls) 1. T o switch between the heating type, locate the switch on the left side of control module.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 34 UW Models with S-Control 1. T urn on the main power source (circuit breaker or cut-off switch on the wall). 2. Use left hand to press and hold the Door Unlock button located on the lower right front of the control panel.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 35 F232156 6. Add dry supplies to the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be in je cted directly into the supply disp enser by an exte rnal chemical supply system.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 36 UW Models with P-Control Pre-Operating Instructions 1. T urn on the main power source (circuit breaker or cut-off switch on wall). Models with the rotation sensor will display WE-6 Firmware ID Code “ HRWC18 ” and later (i.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 37 F232156 4. On UW150 models, use left hand to press and hold the door unlock bu tton located on the door box.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 38 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to pr event drain blockage.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 39 F232156 UW Models with A-Control 1. When display shows “ Cyxx ,” washer-extractor is ready to be loaded with laundry . 2. Use left hand to press and hold the door unlock button located on the lower right front of the control panel.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 40 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to pr event drain blockage.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Inst allation/Operation 41 F232156 UW Models with B-Control 1. When display shows “----, ” washer -extractor is ready to be loaded with laundry . 2. Use left hand to press and hold the door unlock button located on the lower right front of the control panel.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Basic Installation/Op e ra ti on F232156 42 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to pr event drain blockage.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 43 F232156 Basic Inst allation/Operation Disposal of Unit This appliance is marked according to the European directive 2002/96/EC on W aste Electrica l and Electronic Equipment (WEEE).
An important point after buying a device Alliance Laundry Systems P232156R9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems P232156R9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems P232156R9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems P232156R9 you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems P232156R9 will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems P232156R9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems P232156R9.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems P232156R9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems P232156R9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
