Instruction/ maintenance manual of the product M-Series Escali
Go to page of 4
DIGITAL COUNTING SCALE M - Series OPERATING MANUAL INTRODUCTION Congratulations on your purchase of our Multifunctional Scale. In order to ensure the scale continues to deliver peak performance, please read these operation instructi ons carefully and thoroughly pri or to initial usage.
BA TTER Y INST ALLA TION 1. T urn the entire scale upside down and re set it securely on a firm, flat surface. 2. Open the battery door by l oosing the battery door screw . 3. Install four UM2 size C batteries in th e battery comp artmen t, ensuring that the positive/negative side is in the direction as shown in the cabinet.
OPERATION LEVEL THE SCALE When the scale is put to use at a new place, adjust the level of the scale by turning the 4 level adjusting feet until the bubble is located in the middle position of the bubble leveler. ACTIVATING THE SCALE 1. Turn on the “power on/off switch” 2.
USING THE COUNTING MODE: : A. Set sample size: 1. Turn on the scale 2. Press “ PCS ” key, SET will be shown on the display. 3. Press “ MODE ” key, 100 will be displayed. 4. Press “ MODE ” key again to select the sample size in the sequence of 10 → 20 → 40 → 60 → 80 → 100.
An important point after buying a device Escali M-Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Escali M-Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Escali M-Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Escali M-Series you will learn all the available features of the product, as well as information on its operation. The information that you get Escali M-Series will certainly help you make a decision on the purchase.
If you already are a holder of Escali M-Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Escali M-Series.
However, one of the most important roles played by the user manual is to help in solving problems with Escali M-Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Escali M-Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
