Instruction/ maintenance manual of the product NX18BVQA6 Alliance Laundry Systems
Go to page of 18
Installation/Operation Supplement www .comlaundry .com W asher -Extractors Cabinet Freestanding Coin Models Part No. 9002062R1EN December 2007 K eep These Instructions f or Future Refer ence. (If this machine changes o wnership, this manual must accompany machine.
.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Copyright 2007, Alliance Laundry Systems LLC All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in any form or b y an y means without the e xpressed written consent of the publisher .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 9002062 (EN) 2 Installation/Opera tion Supplement Intr oduction Model Identification Information in this manual is applicable to.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 3 9002062 (EN) Installation/Operation Sup plement Safe ty Inf ormation Explanation of Safet y Messages Throughout this manual an.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 4 9. Do not install or store the w asher where it will be exposed to water and/or weather . 10. Do not tamper wi t h the controls. 11.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 5 9002062 (EN) Installation/Operation Sup plement Specifications and Dimensions General Specifications Model 18 30 Overall Dimensi ons Overall widt h 26 in. (660 mm) 30.7 in. (780 mm) Overall heig ht 40.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 6 General Specifications Model 18 30 Drive T rain Inf ormation Number of motor s in drive train 11 Drive motor power 1 HP (0.75 kW) 2 HP (1.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 7 9002062 (EN) Figure 1 CFD21N 1 Hot W ater Connections .7 5 in. (19 mm) 5 V entilation T ub 2 Cold W ater Inlet (required) .75 in. (19 mm) 6 Drain Outle t 3 Po w e r I n p u t 7 Cold W ater Inlet (required) .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 8 Figure 2 CFD23N 1 Hot W ater Connections .7 5 in. (19 mm) 5 V entilation T ub 2 Cold W ater Inlet (required) .75 in. (19 mm) 6 Drain Outle t 3 Po w e r I n p u t 7 Cold W ater Inlet (required) .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 9 9002062 (EN) Installation/Operation Sup plement Installation Dimensional Clearances Ta b l e 1 shows recommended minimum clearances on all sides of the washer-e xtractor .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 10 Mounting Bolt Installation (If Required) Figure 3 After the concrete has cured and the anchors are installed, proc eed as follo ws: 1.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 11 9002062 (EN) Remo ving the T ranspor t Block T o prev ent damage during transportatio n, machine has been equipped with a transport block. T o remove, proceed as follows: 1.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 12 Electrical Specific ations V oltage Designation Standar d Electric Heat Model.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 13 9002062 (EN) Installation/Operation Sup plement Operation Contr ol P anel Figure 6 CHM482R CHM488R 1 Cycle 1 7 Cycle 7 2 Cycl.
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 9002062 (EN) 14 Operating Instructions 1. T urn on main power source (circuit break er). 2. Push black but ton and pull do or handle a way from machine to open door .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 15 9002062 (EN) 6. If desired, select a different cycle at this point before satisfying vend. The LED indicator for that cycle will light. 7. Add liquid and/or powder supplies to supply dispenser .
© Copyright, Alliance Laundry Systems LLC – DO NO T COPY or TRANSMIT 9002062 (EN) 16 Installation/Opera tion Supplement Disposal of Unit This appliance is marked according to the European directiv e 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE).
An important point after buying a device Alliance Laundry Systems NX18BVQA6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems NX18BVQA6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems NX18BVQA6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems NX18BVQA6 you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems NX18BVQA6 will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems NX18BVQA6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems NX18BVQA6.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems NX18BVQA6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems NX18BVQA6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
