Instruction/ maintenance manual of the product WorkFit-A Ergotron
Go to page of 11
888-45-291-W-00 r ev .C • 02/13 1 of 11 ASSEMBLY INSTRUCTIONS Instrucciones de instalación Notice d’assemblage Montageanleitungen Installatie instructies Manuali d’Istruzione 取扱い説明書 安装说明 설치 안내 WorkFit-A, Single LCD Mount, LD 5 - 15 lbs (2.
888-45-291-W-00 r ev .C • 02/13 2 of 11 Note: This product will need tension adjustments once installation is complet e. Mak e sure all equipment is properly installed on the product before a ttempting tension adjustments.
888-45-291-W-00 r ev .C • 02/13 3 of 11 Height Position top of screen slightly below eye level. Position keyboard at about elbow height with wrists at. Distance Position screen an arm's length from face — at least 20” (508mm). Position keyboard close enough to create a 90˚ angle in elbow.
888-45-291-W-00 r ev .C • 02/13 4 of 11 AB C D E F 1 2 3 4 5 6 1x 1x 1x 4x 2x 180˚ M4 x 10mm M4 x 10mm 4x 4x 20" (508 mm) 1x 1x 1x M3 x 6mm M5 x 8mm 20˚ 10˚ 1/4" 1/4” 1x 8mm 90˚ 1x 1.
888-45-291-W-00 r ev .C • 02/13 5 of 11 1 23 2x 0.78"-1.78" (20-45mm) 1.70"-2.56" (43-65mm) W arning: Because mounting surface materials can vary widely , it is impera tive that y ou make sure moun ting surface is strong enough to handle mounted product and equipment.
888-45-291-W-00 r ev .C • 02/13 6 of 11 4 5 0° M3 x 6mm 1x M4 x 10mm M4 x 10mm 4x 4x 6 a b 1x M5 x 8mm 1x 4x 4 mm.
888-45-291-W-00 r ev .C • 02/13 7 of 11 7 2x 8x 1x 1x 8 4x 1x M4x12mm.
888-45-291-W-00 r ev .C • 02/13 8 of 11 9 1/4" 1/4” 8mm 1 2 3 Adjustment · Ajuste · Réglage · Einstellung · Instellen · Regolazione · 調整 · · 조절 Important! Y ou will need to adjust this product after installation is complete.
888-45-291-W-00 r ev .C • 02/13 9 of 11 b 1/4" 1/4” 8mm Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you'll need to increa.
888-45-291-W-00 r ev .C • 02/13 10 of 11 d 1/4" 1/4” 8mm Increase Friction If this product moves too easily from side- to-side, then you'll need to increase friction: Aumentar la fric ci.
888-45-291-W-00 r ev .C • 02/13 11 of 11 f 4 mm e 1/4" 1/4” 8mm Increase Friction If this product moves too easily from side- to-side, then you'll need to increase friction: Aumentar la .
An important point after buying a device Ergotron WorkFit-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ergotron WorkFit-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ergotron WorkFit-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ergotron WorkFit-A you will learn all the available features of the product, as well as information on its operation. The information that you get Ergotron WorkFit-A will certainly help you make a decision on the purchase.
If you already are a holder of Ergotron WorkFit-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ergotron WorkFit-A.
However, one of the most important roles played by the user manual is to help in solving problems with Ergotron WorkFit-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ergotron WorkFit-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
