Instruction/ maintenance manual of the product DS100 Clamping Double Pivot Ergotron
Go to page of 7
Rev B. 9/05 1 of 7 888-47-051-00 INSTALLATION MANUAL 1/2" (13mm) 1/2" (13mm) DS100 Series Pole Clamp Pivot Double Pivot & Double Pivot Portrait/Landscape AB C 1 M4 x 10 mm M4 x 10 mm 75-100mm #8-32 3/32" (2.38mm) 1x 4x 1x or or USA 1-800-888-8458 Europe +31 20 312.
888-47-051-00 2 of 7 Rev B. 9/05 1 4x 3/32" ! 8-32 ! If your monitor uses a screw size other than M4 x 10mm, DO NOT use the M4 x 10mm screws or knob provided as they could result in damage to the monitor.
Rev B. 9/05 3 of 7 888-47-051-00 2b 2 2a 888-99-014 Ergonomics Ergonomía Ergonomie Ergonomi Rev D. 08/02 1 of 17 888-99-014-03 Ergonomic Mounting Heights (for Flat Panel Monitors and Keyboards) ERGONOMICS Ergotron USA 1-800-383-1916 Ergotron Europe +31 20 312.
888-47-051-00 4 of 7 Rev B. 9/05 4 OVERVIEW Ergotron's DS100 Series Pivots are factory-set to provide positive pivot control and a smooth moving force throughout the entire pivot range of motion. To customize your installation, you will evaluate the operation of each Pivot function by moving the monitor through its full range of movement.
Rev B. 9/05 5 of 7 888-47-051-00 a2 a1 1/2" (13mm) 1/2" (13mm) a b2 b1 1/2" (13mm) 1/2" (13mm) b c 2x 2x 1/2" (13mm) c1 c2 c3.
888-47-051-00 6 of 7 Rev B. 9/05 ? Symptom Probable Cause Solution Monitor pivots up and down too diffi cult or too easy Improper Pivot tension Monitor exceeds weight capacity Monitor pivots side-to-.
Rev B. 9/05 7 of 7 888-47-051-00 © 2005 Ergotron, Inc. All rights reserved. Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or part for any purpose other than that authorized by Ergotron, Inc.
An important point after buying a device Ergotron DS100 Clamping Double Pivot (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ergotron DS100 Clamping Double Pivot yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ergotron DS100 Clamping Double Pivot - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ergotron DS100 Clamping Double Pivot you will learn all the available features of the product, as well as information on its operation. The information that you get Ergotron DS100 Clamping Double Pivot will certainly help you make a decision on the purchase.
If you already are a holder of Ergotron DS100 Clamping Double Pivot, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ergotron DS100 Clamping Double Pivot.
However, one of the most important roles played by the user manual is to help in solving problems with Ergotron DS100 Clamping Double Pivot. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ergotron DS100 Clamping Double Pivot along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
