Instruction/ maintenance manual of the product Drying Tumbler 70278501R5EN Alliance Laundry Systems
Go to page of 32
Installation/Operation Supplement www .comlaundry .com Drying T umblers 50 Pound Capacity 75 Pound Capacity Refer to page 3 for Model Identif ication Part No. 70278501R5EN December 2007 K eep These Instructions f or Futur e Reference. (If this machine changes o wnership, this manual must accompan y machine.
.
Installation/Operation Sup plement 70278501 (EN) 1 © Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation must conf orm with local codes. IMPOR T ANT : Inf ormation must be obtained from a local gas supplier on instructions to be f ollowed if the user smells gas.
© Published b y permission of the copyright o wner . All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in an y form or by an y means without the e xpressed written consent of the publisher .
© Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT 3 70278501 (EN) Installation/Operation Sup plement Intr oduction Model Identification Information in this manual is app.
© Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 4 Serial Plate Location TMB803N 1 Serial Plate TMB803N 1 0 2 0 4 0 3 0.
© Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT 5 70278501 (EN) Installation/Operation Sup plement Safe ty Inf ormation Save These Instructions Impor tant Safety Instructions 1. Read all instructions before using the tumbler .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 6 22. Install this tumble r according to the INST ALLA TION INSTR UCTIONS .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 7 70278501 (EN) Installation/Operation Sup plement Installation Specifications and Dimensions Specifications 50 P ound 75 P ound Noise le vel measured during oper ation at operator position of 1 meter ( 3.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 8 Cabinet Dimensions TMB2213N TMB2213N C B E D A G F M o d e l s ABCD E F G 050 Gas and Electric 781 mm (30.75 i n.) 717 mm (28.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 9 70278501 (EN) Horizontal Exhaust Outlet Locations TMB811N TMB811N A B C M o d e l s ABC 050/075 137 mm (5.375 in.) 203 mm (8 in.) 340 mm (13.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 10 Gas Connection Locations TMB812N TMB812N A B Models Diameter A B 050 1/2 in. NPT 394 mm (15.5 in.) 1670 mm (65.75 in.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 11 70278501 (EN) Electrical Connect ion Locations NO TE: These figu res ar e approximate dimensions only . TMB813N TMB813N GAS AND STEAM ELECTRIC A B B A Models A B Gas and Steam 241 mm (9.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 12 Steam Connectio n Locations TMB814N TMB814N C A B D M o d e l s D i a m e t e r ABCD 050/075 3/4 in. NPT 387 mm (15.25 i n.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 13 70278501 (EN) P o sition and Le vel the T umbler Figure 1 NO TE: This manual is only a supplement. Refer to installation/operation ma nual f or full instructions.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 14 Fire Suppression System W ater Requirements IMPOR T ANT : W ater must be supplied to the f ire suppression system, or the f ire suppression system will not operate as intended.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 15 70278501 (EN) Gas Requirements Natural Gas and Liquefied P etroleum IMPOR T ANT : Any product r evisions or con versions must be made by the Manufactur er’ s A uthorized Dealers, Distributors, or local service personnel.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 16 European Gas General Inf or mation This information is to be used when installing gas tumblers in countries, and/or on gases, dif fere nt than the machine’ s factory configuration.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 17 70278501 (EN) Gases and Configurations Burner orifice information at 0-600 meters (0-2000 feet) altitude. N/A = Part no longer a vailable.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 18 Exhaust Requirements Make-Up Air IMPOR T ANT : Do not obstruct the flow of combustion and v entilation air .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 19 70278501 (EN) Electrical Requirements Grounding Instructions NO TE: T o ensure p.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 20 Steam Requirements Obtain specific steam serv ice pipe sizes from the steam system supplier or a qualified steam fitt er .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 21 70278501 (EN) Figure 3 TMB2014N NO TE: Refer to Ta b l e 2 f o r sizing of steam lines. Piping must also be sized accordingly for length of runs, and number of elbows.
© Published b y per mission of the copyright owner – DO NO T COPY or TRANSMIT 70278501 (EN) 22 Installation/Opera tion Supplement Operation Emergenc y Stop Button on CE Models All CE appro ved OPL tumblers are f actory equipped with an emergenc y stop button located on the front panel.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 23 70278501 (EN) Contr ol Instructions Electr omechanical Coin Contr ol CD and CX Control Suffix es 1. Set the TEMPERA TURE selector at HIGH or LO W , or anywhere between these settings.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 24 Manual Timer Control MT and R T Control Suffixes 1. Set the HEA T/DR YING timer for the number of minutes (from 0-60) desired.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 25 70278501 (EN) Dual Digital Timer Control QT and RQ Control Suffix es 1. Select HIGH, MED, LO W or NO HEA T by turning the temperature knob .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 26 Single Dr op Control SD and SX Control Suffix es 1. Select HIGH, MED, LO W or NO HEA T by turning the temperature knob .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 27 70278501 (EN) DMP OPL Control DO Control Suffix Figure 21 DMP OPL F ea tures The DMP has an 8 position DIP switch bank that is accessible from the back of the control board.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70278501 (EN) 28 DMP Coin Control D V and DX Control Suffixes Figure 22 DMP Coin F ea tures ● ST AR T button to start or resume a c ycle.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 29 70278501 (EN) Ignition Contr ol Operation Diagnostic LED (DGN LED) / Err or Codes The Diagnostic LED or DGN LED is located by the po wer connector on the ign ition control.
© Published b y per mission of the copyright owner – DO NO T COPY or TRANSMIT 70278501 (EN) 30 Installation/Opera tion Supplement Disposal of Unit This appliance is marked according to the European directiv e 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE).
An important point after buying a device Alliance Laundry Systems Drying Tumbler 70278501R5EN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems Drying Tumbler 70278501R5EN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems Drying Tumbler 70278501R5EN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems Drying Tumbler 70278501R5EN you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems Drying Tumbler 70278501R5EN will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems Drying Tumbler 70278501R5EN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems Drying Tumbler 70278501R5EN.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems Drying Tumbler 70278501R5EN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems Drying Tumbler 70278501R5EN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
