Instruction/ maintenance manual of the product Dryer Tumblers Alliance Laundry Systems
Go to page of 31
Installation/Operation Supplement Part No. 70392201R8 September 2008 K eep These Instructions f or Future Refer ence. (If this machine changes o wnership, th is manual must accompany machine.
.
Installation/Operation Sup plement 70392201 (EN) 1 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT Installation must conf orm with local codes. IMPOR T ANT : Inf ormation must be obtained from a local gas supplier on instructions to be f ollowed if the user smells gas.
© Published b y permission of the copyright o w ner . All rights reserv ed. No part of the cont ents of this book may be reproduced or transmitted in an y form or by any means without the e xpressed written consent of the publisher .
© Published b y permission of the copyri ght owner – DO NO T COPY or TRANSMIT 3 70392201 (EN) Installation/Operation Sup plement Intr oduction Model Identification Information in this manual is applicable to these models.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 4 Serial Plate Location Wiring Diagram The wiring diagram is located inside the junctio n or contactor box.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 5 70392201 (EN) Installation/Operation Sup plement Safe ty Inf ormation Save These Instructions Impor tant Safety Instructions 1. Read all instructions before using the tumbler .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 6 22. Install this tumble r according to the INST ALLA TION INSTRUCTIONS .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 7 70392201 (EN) Installation/Operation Sup plement Installation Specifications and Dimensions Specifications 25 P ound 30 P ound T30 35 P ound T45 55 P ound Noise lev el measured during operation at operator pos ition of 1 meter (3.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 8 Cabinet Dimensions — 25, 30, 35 a n d 55 P ound Models NO TE: Facia p anels av ailable to increase height of single pocket models to 1835 mm (72.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 9 70392201 (EN) Cabinet Dimensions – T30 a nd T45 Models N/A = Not Applicable NO TE: T o meet ADA compliance, install a 102 mm (4 inch) riser on T30 models only .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 10 Exhaust Outlet Locations TMB2132N TMB19 69N TMB2132N TMB1969N C A B B A 25, 30, 35 AND 55 POUND T30 AND T45 Models Rear Exhaust Diameter A B C 25/30 P ound 152 mm (6 in.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 11 70392201 (EN) Gas Connection Locations TMB2106N TMB19 70N 1 1/2 in. NPT TMB1970N TMB2106N B C C B A A T30 AND T45 1 1 25, 30, 35 AND 55 POUND Models Gas Connecti on AB C 25 P ound 1500 mm (59 in.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 12 Electrical Connection Locations TMB1971N TMB2204N D B A C 25, 30, .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 13 70392201 (EN) Steam Connectio n Locations NO TE: All connections use 3/4 inch NPT pipe. TMB2108N TMB19 72N TMB1972N TMB2108N C D C D A B A B B A 25, 30 AND 35 P OUND T30 Models Inlet Outlet AC B D 25/30/35 P ound 1365 mm (53.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 14 P o sition and Level the T umbler Figure 1 TMB2110N NO TE : Sh aded areas indicate adjacent structure . 1 13 mm (0.5 in.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 15 70392201 (EN) Gas Requirements Natural Gas and Liquefied P etroleum IMPOR T ANT : Any pr oduct re visions or con versions must be made by the Man ufacturer’ s A u thorized Dealers, Distributors, or local service personnel.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 16 Gases and Configurations Burner orifice information at 0-600 meters (0-2000 feet) altitude.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 17 70392201 (EN) Burner orifice information at 0-600 meters (0-2000 feet) altitude. *For Natural Gas, Group E+ app lications, con vert using L.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 18 Ta b l e 1 Burner orifice information at 0-600 meters (0-2000 feet) altitude.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 19 70392201 (EN) Exhaust Requirements Make-Up Air IMPOR T ANT : Do not obstruct the flow of combustion and v entilation air .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 20 Electrical Requirements Grounding Instructions NO TE: T o ensure p.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 21 70392201 (EN) Steam Requirements NO TE: The maximum allowa ble steam pr essure is 8.6 bar (125 psig). In no case may the pressure exceed this value.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 22 T473I Note: Refer to Ta b l e 2 for sizing of steam lines. Piping must also be sized accordingly for length of runs, a nd number of elbo ws.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 23 70392201 (EN) Installation/Operation Sup plement Operation Emergency Stop Button All OPL tumblers are factor y equipped with an emergency stop b utton loc ated on the front pane l.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 24 Contr ol Instructions Dual Digital Timer Control QT Control Suffix 1. Select HIGH, MED, LO W or NO HEA T by turning the temperature knob .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 25 70392201 (EN) Electr on ic OPL Micr o Control H, L, P , S, U and Y Models with OM Control Suffix 1. T o use an Automatic Cycle, press an ON/ SELECT pad.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 26 2. Press ST AR T pad to start tumbler . Figure 13 NO TE: All pads can be pressed in any sequence without damaging control or tumbler .
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Operation Sup plement 27 70392201 (EN) MDC Coin and Car d Control BC , BG, BL, BX and BY Control Suffixes 1. Select temperature by pressing the appropriate temperature pad.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT Installation/Opera tion Supplement 70392201 (EN) 28 Ignition Contr ol Operation Flame Pr obe T ests Une xpected Presence of Flame The Une xpected Presen ce of Flame test is pe rformed when no flame is expected.
© Published b y per mission of the copyri ght owner – DO NO T COPY or TRANSMIT 29 70392201 (EN) Installation/Operation Sup plement Disposal of Unit This appliance is marked according to the European directiv e 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE).
An important point after buying a device Alliance Laundry Systems Dryer Tumblers (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems Dryer Tumblers yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems Dryer Tumblers - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems Dryer Tumblers you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems Dryer Tumblers will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems Dryer Tumblers, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems Dryer Tumblers.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems Dryer Tumblers. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems Dryer Tumblers along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
