Instruction/ maintenance manual of the product CHM1772C Alliance Laundry Systems
Go to page of 19
Operation/Maintenance www .comlaundry .com W asher -Extractors Cabinet Hardmount Refer to Page 6 for Model Identification CHM1772C CHM1772C Keep These Instructions for Future Reference. (If this machine changes ownership, th is manual must accompany machine.
.
F8208401 © Copyright 201 1, Alliance Laundry Systems LLC All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher .
F8208401 2 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Safety Information Explanation of Safety Messages Precautionary statements (“DANGER,” “W ARNING” and “CAUTION”), followed by specific instructions, are found in this manual an d on machine decals.
Safety Informa tion 3 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT 9. Do not install or store the washer where it will be exposed to water and/or wea ther .
Safety Informati on F8208401 4 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT IMPORT ANT : Ensure that the recommended clearances for inspection and maintena nce are provided. Never allow the ins pection and maintenance sp ace to be blocked.
Safety Informa tion 5 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT Operator Safety T o ensure the safety of machine operators, the following maintenance ch ecks must be performed daily: 1. Prior to operating the ma chine, verify that all warning signs are present and le gible.
F8208401 6 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Introduction Model Identification Information in this manual is applicable to these models: Model 20 POUND HCD020GD2.
Introduction 7 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT (Continued) Model 40 POUND HCD040LD2 HCL040GN2 HCL040HC2 HCL040HDF HCL040HE2 HCL040HN2 HCN040GC2 HCN040.
Introduction F8208401 8 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT (Continued) Model 80 POUND HCD080LDV HCL080HNF HCN080GCF HCN080GDF HCN080GEF HCN080GNF HCN080GXF HCN080.
Introduction 9 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT Nameplate Location The nameplate is loca ted at the rear of the machine and inside door . Always provide the machine’ s serial number and model nu mber when ordering parts or when seeking technical assistance.
Introduction F8208401 10 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT * Denotes Brand Figure 2 Model Number Fami liarization Guide Sample Model Number: * CN040 GC2OU1D01 *C.
11 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT Operation Operating Instructions 1. T urn on main power source (circuit breaker).
Operation F8208401 12 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 7. Add liquid and/or powder supplies to supply dispenser . Refer to Figur e 6 . a. Detergent: • Liquid - Compartment 1 (prewash) + Compartment 3 • Powder - Compartment 1 (prewash) + Compartment 2 b.
13 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT Maintenance IMPOR T ANT : Replace all panels that ar e removed to perform service and maintenance pr ocedures. Do not operate the machine with missing guards or with br oken or missing parts.
Maintenance F8208401 14 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT W eekly 1. Check the machine for leaks. a. Start an unloaded cycle to fill the machine. b. V erify that door and door gask et do not leak. c. V erify that the drain valve is operating and that the drain system is free from obstruction.
Maintenance 15 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT c. For flat-pulley drive sy stems, verify allowable distance of belt from edge of pulley .
Maintenance F8208401 16 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 7. Use compressed air to clean lint from motor . 8. Clean interior of machine, both basket and shell, by wiping with a water-soaked sponge or cloth. 9. Use compressed air to clean all electrical components of moisture and dust.
Maintenance 17 F8208401 © Copyright, Allian ce Laundry System s LLC – DO NOT COPY or TRANSMIT Care of St ainless Steel • Remove dirt and grease with deter gent and water . Thoroughly rinse and dry after washing. • A void contact with dissimilar metals to prevent galvanic corrosion when sa lty or acidic solutions are present.
An important point after buying a device Alliance Laundry Systems CHM1772C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alliance Laundry Systems CHM1772C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alliance Laundry Systems CHM1772C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alliance Laundry Systems CHM1772C you will learn all the available features of the product, as well as information on its operation. The information that you get Alliance Laundry Systems CHM1772C will certainly help you make a decision on the purchase.
If you already are a holder of Alliance Laundry Systems CHM1772C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alliance Laundry Systems CHM1772C.
However, one of the most important roles played by the user manual is to help in solving problems with Alliance Laundry Systems CHM1772C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alliance Laundry Systems CHM1772C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
