Instruction/ maintenance manual of the product EMP-6010 Epson
Go to page of 84
1 User’s Guide.
2 Notations Used in This Guide f Safety Indications So that you can use the projector safely and correctly, symbols are applied in the documentation and on the projector to indica te possible harm to the user or to others and the risk of damage to property.
3 Contents Projector Features .................................................................................... .. 5 Part Names and Functions ................................................. ....................... 6 Front/Top ................ ...
Contents 4 PJLink (EMP-6110 Only) ..................................................... ..................... 77 List of Supported Monitor Displays ........................................................78 Specifications .............................
5 Projector Features f A highly efficient air filter is install ed Decreases the amount of dust that enters the projector. f A message and an indicator inform you when the air filter is clogged and requires cleaning or t hat it is time to replace the filter.
6 Part Names and Functions Front/Top * Do not remove the zoom ring cover, and do not use the projecto r when it is open . Otherwise dust can enter into the projector and shorten the optica l engine's serv ice life. Name Function A Speaker B Control panel s p.
Part Names and Functions 7 Rear (EMP-6110) Name Function A Storage feet When storing the projec tor upright, make sure that these feet are at the bo ttom. B Security slot ( j ) s p. 2 8 C S-Video port For S-video g signals from video sources. Video port For composite video g signals from video sources.
Part Names and Functions 8 Rear (EMP-6010) Name Function A Storage feet When storing the projec tor upright, make sure that these feet are at the bo ttom. B Security slot ( j ) s p. 2 8 C S-Video port For S-video g signals from video sources. Video port For composite video g signals from video sources.
Part Names and Functions 9 Control Panel Name Function A [Menu] button Displays and closes the configuratio n menu. s p. 3 0 B [Power] button Turns the projector powe r on or off. s Quic k Start Guide C [Source Search] button Changes to the next input source that is connected to the pro jector and is sending an image.
Part Names and Functions 10 Remote Control Name Function A [E-Zoom] buttons ( z ) ( x ) ( z ) Enlarges the image with out changing th e projection siz e . ( x ) Reduces parts of images that have b een enlarged usi ng the [ z ] button. s p.1 9 B [A/V Mute] button Turns the video and audio on or off.
Part Names and Functions 11 Base O [ID] button When using multiple projectors, press this button to sp ecify the ID of the p rojector to be used. This button is a lso used to determin e the ID of a projector and to check whether th e remote control ca n be used.
Useful Functions This chapter explains useful func tions for giving presentat ions and so on, and t he security functions. Changing the Projected Image . ......................... 13 • Automatically Detect Incoming Signals and Change the Projected Image (Source Se arch) .
13 Changing the Projected Image You can change the projected image in the following two ways. • Changing by Source Search The projector automatically det ects signals bei ng input from connected equipment, and the image being input from the equipment is projected.
Changing the Projected Image 14 Changing Directly from the Remote Contro l You can change directly to the ta rget image by pressing the following buttons on the remote control. Changes to images fro m the Com puter1 po rt. Changes to images fro m the S-Video port.
15 Functions for Enhancing Projection Selecting the Projection Quality (Selecting Color Mode) You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected.
Functions for Enhancing Projection 16 Hiding the Image and Sound Temporarily (A/V Mute) You can use this when you want to focus the audience's attention on what you are saying, or if you do not want to show deta ils such as when you are changing between files during pr esentations from a computer.
Functions for Enhancing Projection 17 Changing the Aspect Ratio g (Aspect) When video equipment is connected, images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. You can change the aspect rati o for images in squeeze mode g as follows.
Functions for Enhancing Projection 18 Pointer Function (Pointer) This allows you to move a pointer ic on on the projected image, and helps you draw attention to the area you are talking about. A Display the po inter . Each time you press the button, th e pointer appears or disappears.
Functions for Enhancing Projection 19 Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to see them in greater detail, such as graphs and tables. A St art E-Zoom. B Move the cross to the ar ea of the image that you want to enlarge.
20 Specifying the projector(s) that w ill respond to the remote control when multiple projectors are used When the projector is being used together with several others, the projector that responds to the re mote control can be limited as described below.
Specifying the projector(s) that will respond to the remote control when mult iple projectors are used 21 B Choose the ID you want to set and press the [Enter] button.
22 Color adjustment when using multiple pr ojectors (Multi-Screen Color Adjustment) When several projectors are lined up and projecting images, you can adjust the brightness and color tone of each projector's image with multi-screen color adjust ment so that the colo rs of images from each projector match closely.
Color adjustment when using multiple pr ojectors (Multi-Screen Color Adjustment) 23 Image Correction Method A Press the [Menu] button and select "Extended" - "Multi-screen" from the configuration menu. s "Using the Configuration Menu" p.
24 Security Functions The projector has the followin g enhanced security functions. • Password Protect You can limit who ca n use the projector. • Operation Lock You can prevent people changing the setti ngs on the projector without permission. • Security Lock The projector is equipped with various types of anti-theft security devices.
Security Functions 25 f Setting Password Protect Use the following procedure to set Password Protect. A Hold down the [Freeze] button for about five seconds. The password protect set ting menu is displayed. B T urn on "Power On Protect". (1) Select "Po w er On Protect", and then press the [Enter] b utton.
Security Functions 26 (3) While holding do wn the [Num ] button, enter a four digit number using the numeric buttons. The number entered is displayed as "****". When you enter the fourth digit, the conf irmation screen is displayed. (4) Re-enter the password.
Security Functions 27 Restricting Operation (Operation Lock) Do one of the following to lock the operation buttons on the control panel. •F u l l l o c k All of the buttons on the control panel are locked. You cannot perform any operations from the control panel, including turning the power on or off.
Security Functions 28 Anti-Theft Lock As the projector is often setup on ceiling mounts and left in rooms unattended, it is possible that someone may try and take the projector, so the projector includes the fo llowing security devices. • Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington.
Configuration Menu This chapter explains how to use the configuration menu and its functions. Using the Configuration Menu .......................... 30 List of Functions ................................................. 31 • Image Menu ............
30 Using the Configuration Menu A Selecting from the top menu C Changing the selected item B Selecting from the sub menu Top menu Sub menu (Settings) Guide Select the setting to chang e Using the remo.
31 List of Functions Image Menu Items that can be set vary depending on the image signal currently being projected as shown in the fo llowing screen shots. Sett ing details are saved for each image signal. Sub Menu Function Color Mode Y ou can select the quality of the image to suit your surroundings.
List of Functions 32 Signal Menu Items that can be set vary depending on the image signal currently being projected as shown in the fo llowing screen shots.
List of Functions 33 Settings Menu Sub Menu Function K eystone Y ou can correct vertical ke ystone distortion in images. s Quick Start Guide Operation Lock Y ou can use this to restrict operation of the projector's control panel. s p.27 Pointer Shape Y ou can select the shape of the pointer .
List of Functions 34 T est Pattern When the projector is setup, a test pattern is displayed so that you can adju st the projection with out connecting oth er equipment. Wh ile displaying the test pattern, you can perform Zoom , Focus, and K eystone adjustments.
List of Functions 35 Extended Menu Sub Menu Function Display Y ou can make settings related t o the projector's display . Messages : Y ou can set whether to display (On) or not display (Off) the .
List of Functions 36 Standby Mode Y ou can use netwo rk monitoring and control functions while the proj ector is in standby mode when this is set to "Network On". Depending on the mo del, you can use the follo wing methods to monitor and control the state of the projector .
List of Functions 37 Network Menu (EMP-6110 Only) When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after setting "Network Protect" to "Off".
List of Functions 38 SNMP g Set the SNMP . T rap IP Address 1/T rap IP Address 2 : Y ou can register up to two for the SNMP trap notif ication destination. The IP address registered in "T rap IP Addre ss 2" is used when the IP address registered in "T rap IP Address 1" cannot be access ed.
List of Functions 39 *2 When the mail notification function is set to "On" and the projector enters an abno rmal/warning state, the following mail is sent.
List of Functions 40 Info Menu (Display Only) Lets you check the status of the image sign als being projected and the status of the projector. It ems displayed vary depending on the image signal currently being projected as shown in the following screen shots.
List of Functions 41 Reset Menu Sub Menu Function Reset All Y ou can reset all items in the configur ation menus to thei r default settings. The follo wing items are not reset to their def aults: &quo.
Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help ..................................................... 43 Problem Solving ................................................. 44 • Reading the Indicators.
43 Using the Help If a problem occurs with the projec tor, Help uses on-screen displays to assist you in solving the problem. A Press the [Help] button. The help screen is displayed. B Select a menu item. C Confirm the selection. D Use the same operations as procedures 2 and 3 to proceed through the menu to more det ailed items.
44 Problem Solving If you are having a problem with the projector, first check th e projector's indicators and refe r to "Reading the Indicators" be low. If the indicators do not show clearly what the problem mi ght be, re fer to "W hen the Indicators Provide No Help".
Problem Solving 45 f t Power indicator lights red : Lit : Flashing: : Off St atus Cause Remedy or St atus Internal Error Stop using the projector , disconnect the po wer cable from th e electrical outlet, and contact your local dealer or the nearest address pro vided in the Support and S ervice Guide .
Problem Solving 46 Lamp Error Lamp Failure Lamp Cov er Open Check the f ollowing two points. • T ake out the lamp and check if it is cracked. s p.63 • Clean the air f ilter . s p.58 If it is not cracked _ Re-fit the lamp and turn on the po wer . If the error continues _ Replace the lamp with a new lamp and turn on the po wer .
Problem Solving 47 f i · o · n Indicator is lit/flashi ng in orange or green : Lit : Flashing : Off : Varies according to the projector status St atus Cause Remedy or St atus High T emp W arning (This is not an abnormality . Ho wev er, if the temperat ur e rises too high again, projection stops automatically .
Problem Solving 48 Clean Air Filter Notice The air filter requires cleaning. Clean the air f ilte r . s p.58 * The air f ilter cleaning indicator lights and message is di splayed only when "Clean Notice" in "Air Filter Settings" of the "Extended" me nu is set to "On".
Problem Solving 49 When the Indicators Provide No Help If any of the following problems oc cur and the indicators do not offer a solution, refer to the pages given for each problem.
Problem Solving 50 f Problems relating to images f No images appear f Moving images are not displayed f Projection stops automatically Check Remedy Did you press the [Po wer] button? Press the [Po wer] button to turn the po wer on.
Problem Solving 51 f The message "Not supported." is displa yed f The message "No Sign al." is displayed f Images are fuzzy or out of focus Check Remedy Is the image signal format setting correct? Change the setting accordi ng to the signal for th e connected equipment.
Problem Solving 52 f Interference or distorti on appear in images f The image is truncated (large) or small, or the aspect is not suitable Check Remedy Is the image signal format setting correct? Change the setting accordi ng to the signal for th e connected equipment.
Problem Solving 53 f Image colors are not right f Images appear dark f Nothing appears on the external monitor Check Remedy Do the input signal settings match the signals from the connected de vice? Change the follo wing settings according to the signal for the connected equipment.
Problem Solving 54 f Problems when projection starts f Power does not turn on f The fan noise is abnormally loud f Other problems f No sound can be heard or the sound is faint Check Remedy Did you press the [Po wer] button? Press the [Po wer] button to turn the po wer on.
Problem Solving 55 f The remote control does not work f Mail is not received even if an abnormality occurs in the projector (EMP-6110 only) Check Remedy Is the remote control light-emi tting area pointing to wards the remote recei ver on the projector when it is operated? Point the remote control to wards the remote receiv er .
Appendices This chapter provides information on maintenance procedures to ensure the best level of perf ormance from the projector for a long time to come. Installation Methods .... ................................ ............. 57 Cleaning ..........
57 Installation Methods The projector supports the following four different projection methods. Wa r n i n g • A special method of in stallation is required when suspending the projector from the ceiling (ceiling mount). If it is not installed correctly , it could fall causing an accident and injury .
58 Cleaning You should clean the projector if it be comes dirty or if the quality of projected images starts to deteriorate. Cleaning the Projector's Surface Clean the projector's surface by wi ping it gently with a soft cloth.
Cleaning 59 A Open the air filter cover . While pushing the air filter catches, pull the co ver do wn. B Remove the air fil ter . Grip the raised part at the center of the air f ilter and pull it straight out. C Orient the front face of the air filter downwards and t ap the filter four or five times to dislodge the dust.
Cleaning 60 D Use a vacuum cleaner to remove the remaining dust from the front face of the filter . E Inst al l the air filter . F Close the air filter cover . Press the co ver until it clicks into place. Set so that the projected ridge points to the front of the projector.
61 Replacing Consumables This section explains how to replac e the remote cont rol batteries, the lamp, and the air filter. Replacing the Remote Control Batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for so me time, it probably means that the batteries are becoming flat.
Replacing Consumables 62 Replacing the Lamp f Lamp replacement period It is time to replace the lamp when: • The message "Replace the lamp." is displayed when you start projecting. • The lamp indicato r flashes orange. • The projected image gets darker or starts to deteriorate A message is displayed.
Replacing Consumables 63 f How to replace the lamp A Af ter you turn off the pr ojector's power and the confirmation buzzer beep s twice, disconnect the power cable. B W ait until the lamp has cooled down, then remove the lamp cover from the surface of the projector .
Replacing Consumables 64 C Loosen the two lamp fixing screws. D T ake out the old lamp. If the lamp is cracked, replace it with a ne w lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to av oid pieces of broken glass.
Replacing Consumables 65 f Resetting the lamp operating time The projector records how long the la mp is turned on and a message and indicator notify you when it is time to replace the lamp. After replacing the lamp, make sure you reset the lamp hours from the configuration menu.
Replacing Consumables 66 C Remove the air fil ter . Grip the raised part at the centre of the air f ilter and pull it straight out. D Inst all the new air filter . E Close the air filter cover . Press the co ver until it clicks into place. Set so that the projected ridge points to the front of the projector.
Replacing Consumables 67 f Resetting the air filter operating t ime The projector keeps a running total of the time the air filter is used and a message and indicator notify you when it is time to replace the air filter. After replacing the air filter, make sure you rese t the air filter time from the configuration menu.
68 Saving a User’s Logo You can save the image that is curr ently being projected as a user's logo. A Project the image you want to use as the user's logo, and then pres s the [Menu] button. B From the configuration menu , select "Extended" - "User's Logo".
Saving a User’s Logo 69 D The image is recorded and a selection marquee box is displayed. Move the box to select the p art of the image to use as the user's lo go. E When "Select this image? " is displayed, select "Y es". F Select the zoom factor from the zoom setting screen.
70 Screen Size and Distance See the following table to choose the best position for your pr ojector. The values are only a guide. Units: cm (in.) Units: cm (in.
71 Connecting to External Equipment Connecting to an External Monitor Computer images being input to th e Computer1 port can be displayed on an external monitor and the screen at the same time when connected to the projector.
72 Connecting a LAN Cable (EMP-6110 Only) Connect with a commercially avai lable 100baseTX or 10baseT type LAN cable. Attention T o prevent malfunctions, use a category 5 shielded LAN cable.
73 Optional Accessories and Consumables The following list of optional accesso ries is current as of January, 2008. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase.
74 Glossary This section explains easily terms that are used with the projector and difficult terms t hat are not explained in the text of t his guide. For details, refer to other commercial ly available publications. AMX De vice Discov er y AMX Device Disco very is a system setup techn ology dev eloped by AMX Corp oration.
Glossary 75 Squeeze mode In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the recordi ng medium as 4:3 images. When these images are played back by th e projector in squeeze mode, they are re stored to their original 16:9 format.
76 List of ESC/VP21 Commands Command List When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode . When the projector's power has turned on, a colon ":" (3Ah) is returned.
77 PJLink (EMP-6110 Only) PJLink Class 1 was establis hed by the JBMIA (Japan Business Machine and Information System Indu stries Association) as a standard protocol for controlling network-compat ible projector's as part of their efforts to standardize proj ector control protocols.
78 List of Supported Monitor Displays f Computer image * Connection is not po ssible if the equipment does n o t have a VGA output po rt. Even when signals other th an those mentioned above are input, it is likely that the image can be projected. However, not all functions may be supported.
79 Specifications Product name Multimedia Projector EMP-6110 Multimedia Projector EMP-6010 Pixel works DNX TM ICs are used in this projector . Angle of tilt If you use the projector tilted at an angle of more than 30 ° it could be damaged and cause an accident.
Specifications 80 We : Epson America, Inc. Located at : 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90 806 Tel : 562-290- 5254 Declare under so le responsibility that the p roduct identified herein, complies with 47CFR Pa rt 2 and 15 of the FCC rules as a Class B digital device.
81 Appearance Units: mm 465 95.9 * 128 187.1 23 136 4-M4X9 72.9 156 Center of le ns 32 * Distance from cen tr e of len s to su sp en sio n brac ket fixing point 26 120 94 340 18 18.
82 Index A A/V mute .............. ................ ................ ......... 16, 35 Abs. color temp .............. ................ ................ ..... 31 Address 1/2 /3 setting ........................ ................ .. 38 Adjustment leve l ..
Index 83 N Network menu ................ ................ ................ ..... 37 Network prote ct ........... ................ ................ ........ 24 Numeric but tons ............. ................ ................ ..... 10 O Operating temp erature .
84 All rights reserved. No part of this publication may be reproduced, stored in a retrie val system, or transmitted in any form or by an y means, electronic, mechanical, photocopying, re cording, or otherwise, without the prior written permission of SEIK O EPSON CORPORA TION.
An important point after buying a device Epson EMP-6010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson EMP-6010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson EMP-6010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson EMP-6010 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson EMP-6010 will certainly help you make a decision on the purchase.
If you already are a holder of Epson EMP-6010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson EMP-6010.
However, one of the most important roles played by the user manual is to help in solving problems with Epson EMP-6010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson EMP-6010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
