Instruction/ maintenance manual of the product EB-S18 Epson
Go to page of 134
User’s Guide.
Notations Used in This Guide • Safety indications The documentation and th e projector u se graphical sy mbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property.
Notations Used in This G u i d e ........................ 2 Introduction P r o j e c t o r F e a t u r e s .......................................... 7 Q u i c k a n d E a s y S e t u p , P r o j e c t i o n , a n d S t o r a g e .....................
Useful Functions P r o j e c t i o n F u n c t i o n s ......... .............................. 4 8 P r o j e c t i n g W i t h o u t a C o m p u t e r ( P C F r e e ) ............................. 4 8 S p e c i f i c a t i o n s f o r f i l e s t h a t c a n b e p r o j e c t e d u s i n g P C F r e e .
P r o j e c t i o n s t o p s a u t o m a t i c a l l y ............... ............ ........ 9 7 T h e m e s s a g e N o t s u p p o r t e d i s d i s p l a y e d ........................... 9 7 T h e m e s s a g e N o S i g n a l i s d i s p l a y e d .
Introduction This chapter explains the projector's features and the part names..
Quick and Easy Set up, Projection, and Storage • Turn the projector on and off by simply plugging in or unplugging. • Project onto large screens from a short distance. • Make easy height adjustment s with one lever. • N o c o o l d o w n d e l a y m a k e s i t e a s y t o p u t a w a y .
Connect a USB storage device and project movies or images (PC Free) You can connect USB storage devices or digital cameras to the projector and project saved images. A wide range of file formats are supported such as movies or images. s "Projecting Without a Computer (PC Free)" p.
• Wirelessly projecting your computer's screen You can project your computer's screen over a network by using EasyMP Network Projection. You can download EasyMP Network Projection from the following Web site.
All of the features in this guide are e x p l a i n e d u s i n g i l l u s t r a t i o n s o f E B - X 2 4 unless otherwise mentioned. Front/Top Name Function A Air exhaust ven t Exhaust vent for air used to cool the projector internally.
Name Function O Lamp C over Fix ing Sc rew Screw to fix the lamp cover in place. Rear Name Function A Pow er in le t Connects the power cord to the projector. s "From Installation to Projection" p.30 B USB-A port • Connects a USB memory device or a digital camera and projects movies or images using PC Free.
Name Function D USB -B port • Connects the projector to a computer using a USB cable, and projects the images on the computer. s "Projecting with USB Display" p. 32 • Connects the projector to a computer using a USB cable to use the Wireless Mouse function.
Name Function C Re ar fe et When setup on a surface such as a desk, turn to extend and retract to adjust the horizontal tilt. s "Adjusting the Horizontal Tilt" p.41 D Fron t adju st able fo ot When setup on a surface such as a desk, extend the foot to adjust the position of the image.
Name Function D [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.90 E [Esc ] but to n • Stops the current function. • If pressed when the Configuration menu is displayed , it moves to the previous menu level.
Name Func tion A Power button [ t ] Turns the projector power on or off. s "From Installation to Projection" p.30 B [Computer ] but ton Changes to images from the Compute r port. C [V ideo] button Each time the button is pressed, the image cycles through the Video, S-Video, and HDMI ports.
Name Func tion O [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.90 P [Fr eeze] but ton Images are paused or unpaused. s "Freezing the Image (Freeze)" p.
Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries.
Remote control operatin g range Part Names and Functions 18.
Preparing the Projector This chapter explains how to install the projector and connect projection sources..
Installation Methods The projector supports the following four different projection methods. Install the projector according to the co nditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen.
• Install the projector so that it is parallel to the screen. If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. • Place the projector on a level surface. If the projector is tilted the projected image is also tilted.
4:3 Screen Size For EB-X24 50” 80” 100” 150” For EB-X18 For EB-S18 Installing the Projector 22.
Illustrations in this section are of EB-X24 . The port name , location, and connector orientation differ depending on the sour ce being connected. Connecting a Computer To project images from a computer, connect th e computer using one of the following methods.
Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video or S-video cable Connect the video output port on the image source to the projec tor's Video port.
Attention • Turn off the equipment you want to connect before connecting to the projector. If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in .
Attention • I f y o u u s e a U S B h u b , t h e c o n n e c t i o n m a y n o t o p e r a t e c o r r e c t l y . D e vices such as digital cameras and USB devices should be conne cted to the projector directly. • When connecting and using a USB-compatib le hard disk, make su re you connect the AC adaptor supplied with the hard disk.
Installing the Wireless LAN Unit By installing the supplied or optional wireless LAN unit, you can projec t a computer screen over a network. Connect the wireless LAN unit to the projector's USB-A port. a • When connecting to the network using wireless LAN, make sure you make network settings from the Configuration menu.
a Turn on the projector, and then press the [LAN] b utton on th e remote control. The LAN standby screen is displayed. b Check that the SSID and IP address information are displa yed on the LAN standby screen, and then remove the Wireless LAN unit. c Connect the Quick Wireless Connection USB Key to the USB-A port.
Basic Usage This chapter ex plains how to project and adjust images..
From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. Attention Make sure you connect the cable from the source to the projector first, and then connect the power cord to the projector.
Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Using the remote c ontr ol Using the c ontrol panel LAN When two or more image sources are connected, press the [Source Search] button until the target image is projected.
Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Rem ote co ntro l A Switches to images from the Computer port. B Each time the button is pressed, it cycles through the images being input from the following sources.
CP U Mobile Pentium III 1.2 GHz or faster Recommended: Pentium M 1.6 GHz or faster Amo un t of Mem ory 256 M B or m ore Recommended: 512 MB or more Har d Disk Spac e 20 MB or more Dis pla y Resolution of no less than 640x480 and no higher than 1600x1200.
c Computer images are projected. It may take a while before computer images are projected. Until computer images are projected, leave the equipment as it is and do not disconnect the USB cable or turn off the power to the projector. d Disconnect the USB cable when you finish projection.
Uninstalling For Windows 2000 a Click Start , s e l e c t Settings , a n d t h e n c l i c k Control Panel . b Double-click Add/Remove Programs . c Click Change or Remove Progr ams . d Select Ep son USB Display and click Change/Remove . For Windo ws XP a Click Start , a n d t h e n c l i c k Control Panel .
Correcting Keystone Distortion You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) Automatically corrects vertical keystone distortion. • Correcting manu ally (H-Keystone Adjuster) Manually corrects horizontal keystone distortion using the horizon tal keystone adjuster.
Correcting automatically Auto V-Keystone When the projector detects any movement, for example when it is installed, moved, or tilted, it automatically corre cts vertical keystone distortion.
H/V-Keystone Manually correct distortion in the horizontal and vertical direc tions independently. a Press the [ w ] o r [ v ] button on the control panel during projection t o display th e Keystone screen. b Press the following buttons to correct keystone distortion.
b Select Ke ystone from Settings . c Select Quick Corner , a n d t h e n p r e s s t h e [ ] button. d Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ w ], [ v ], [ a ], and [ b ] buttons (or the [Wide]/[Tele] buttons) on the con trol panel, se lect the corner to correct, and then press the [ ] b u t t o n .
f Repeat procedures 4 and 5 as needed to adjust any remaining corners. g When you are done, press the [Esc] button to exit the correction menu. Because Keystone was changed to Quick Corner , t h e c o r n e r selection screen shown in step 4 is displaye d the next time you press the [ w ] o r [ v ] button on the control panel.
Adjusting the Image Position Press the foot adju st lever to extend the front ad justable foot. You can adjust the position of the image by tilting the projector up to 12 degrees. a The larger the angle of tilt, the harder it becomes to focus. Install the projector so that it only needs to be tilted at a small angle.
Adjusting the Volume You can adjust the volume using one of the following methods. • Press the [Volume] button on the control panel or the remote control to adjust the volume.
Each time you press the [Color Mode] button, the Color Mode name is displayed on the screen and the Color Mode changes. Rem ote co ntro l a You can set Color Mode from the Configuration menu.
Available aspect modes vary depending on the image signal currently being projected. Changing methods Each time you press the [Aspect] button on the remote control, the aspect mode name is displayed on the screen and th e aspect ratio changes. Re m o t e c on tro l a You can set the aspect ratio from the Configuration menu.
A 4:3 B 16:9 Projecting images from the HDMI port (for EB-X24/EB-X18/EB-S18) E a c h t i m e t h e A s p e c t b u t t o n i s p r e s s e d , t h e a s p e c t m o d e c h a n g e s i n t h e order Auto , 4:3 , a n d 16: 9 .
For EB-X24/EB-X18/E B-S18 Aspect Mode Input S igna l XGA 1024X768( 4:3) WXGA 1280X800( 16:10) Normal 4:3 16:9 a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions..
Projecting Without a Computer (PC Free) By connecting a USB storage device such as a USB flash drives or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called PC Free. a • You may not be able to use USB storage devices that incorporate security functions.
PC Free operating methods Although the following steps are explained base d on the remote control, you can perform th e same operations from the control panel. Starting PC Free a Change the source to USB. s "Switching to the Target Image by Remote Control" p.
Projecting images a Press the [ ], [ ], [ ], or [ ] buttons to select the file or fo lder you want to project. a If not all of the files and folders are displayed on the curr ent screen, press the [ ] ] button on the remote control, or position the cursor on Next Page at the bottom of the scree n and press the [ ] button.
Projecting the selected images or movies Attention Do not disconnect the USB storage device while it is being acce ssed. PC Free may not operate correctly. a Start PC Free. The file list screen is displayed. s "Starting PC Free" p.4 9 b Press the [ ], [ ], [ ], or [ ] buttons to sel ect the file you want to project.
Projecting image files in a fo lder in sequence (Slideshow) You can project the im age files in a folder in sequence, one at a time. This function is called Slideshow.
Image file display settings and Slideshow operation settings You can set the file display order and Slideshow operations on the Option screen. a Select Option at the bottom of the file list s creen, and then pres s the [ ] b u t t o n . b W h e n t h e f o l l o w i n g O p t i o n s c r e e n i s d i s p l a y e d , s e t e a c h o f t h e items.
Hiding the Image and Sound Temporarily (A/V Mute) You can use this when you want to fo cus the audience's attention on what you are saying, or if you do not want to show details such as when you are changing between files during presentations from a computer.
Each time you press the [Freeze] button, Freeze turns on or off. Re m o t e c on tro l a • Audio does not stop. • When projecting moving images, the images continue to be played back while the screen is frozen. It is not possible to resume projection from the point where the screen was frozen.
Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to see them in greater detail, such as graphs and tables. a Start E-Zoom. Press the [ z ] button to display the Cross ( ). Re m o t e c on t ro l b Move the Cross ( ) to the area of the image that yo u want to enlarge.
U s i n g t h e R e m o t e C o n t r o l t o O p e r a t e t h e M o u s e Pointer (Wireless Mouse) You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. The following oper ating systems are compatible with Wireless Mouse.
a • When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed.
d M o v e t h e b o x t o s e l e c t t h e p a r t o f t h e i m a g e t o u s e a s t h e U s e r ' s Logo. You can perform the same operat io ns from the projector's control panel. Re m o t e c on t ro l a You can save at 400x300 dots in size .
The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing th e settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.
a • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.61 • When the password is set, stick the password protect sticker in a visible position on the projector as a further theft deterrent.
When you enter the correct passwor d, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be lock ed." is displayed for approximately five minutes, and then the projector switches to standby mode.
c Select either Full Lock or Partial Lock according to your purpose. d Select Ye s when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods.
Security Functions 64.
Changing Settings Using a Web Browser (Web Control) By using a Web browser of a computer connected to the projector on a network, you can make settings and control the projecto r. This functi on allows you to perform setup and contro l operations remotely.
a • Enter the user ID even if a password has not been set. You c a n n o t c h a n g e t h e u s e r I D . • You can change the password in Network menu from the Configuration menu.
Name Func tion F [Pa ge] butto ns [ [ ][ ] ] Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wire less Mouse)" p.
The details of the problem are listed li ne by line. The messages are listed below. • Internal error • Fan related error • Sensor error • Lamp cover is open • Lamp timer failure • Lamp out.
c Connect the computer's USB po rt to the projector's USB-B port w i t h a U S B c a b l e . Start from step 2 from the second time . Command list When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode .
Check the numbers and then apply the follow ing countermeasures. If you cannot resolve the problem, contact your network adminis trator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Ev ent I D Cause R emedy 0432 0435 Failed to startup EasyMP Network Projection.
Configuration Menu This chapter explains how to use the Configuration menu and its functions..
This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.
Configuration Menu Table Settable items vary depending on the model being used and the image signal and source being projected. To p Men u Na me Su bmenu Na me It ems or S ett ing V a lu es Image menu s p.
To p Men u Na me Su bmenu Na me It ems or S ett ing V a lu es Sleep Mode Timer 1 to 30 Lens Cover Timer On and Off A/V Mute Timer On and Off Standby Mode Communication On and Communication Off ECO Display On and Off Info menu s p.
To p Men u Na me Su bmenu Name S etti ng V a lues Trap IP Address 1 and Trap IP Address 2 - Bonjour On and Off Message Broadcasting On and Off Image Menu Settable items vary depending on the image signal and source currently being projected. Setting details ar e saved for each image signal.
You cannot make settings on the Sign al menu when the source is USB D i s p l a y , U S B , o r L A N . s "Automatically Detect Input Signal s and Change the Projected Image (Source Search)" p.31 Submenu Function Auto Setup Set to On to automatically adjust Tr acking, Sync.
Submenu Function Ov er scan Changes the output image ratio (the range of the projected image). You can set the cropping range to Off , 4% , or 8% . When the source is HDMI, Aut o is available. When Auto is selected, it automatically changes to Off or 8% according to the input signal.
Submenu Function Poi nt er Sh ape You can select the shape of the pointer. Pointer 1: Pointer 2: Pointer 3: s "Pointer Function (Pointer)" p.55 Vo lu m e You can adjust the volume. Setting values are saved for each source. Rem ote Re c eive r You can limit the reception of the operation signal from th e remote control.
Submenu Function Displ ay You can make settings related to the projector's display. Messages : W h e n s e t t o Off , the following items will not be displayed. Item names when the Source, Color Mode, or Aspect Ratio is changed, messages when no signal is being input, and warnings such as High Temp Warning.
s "Setting Password Protect" p.60 Submenu Function Net. Info. - Wi re‐ less LAN Displays the following network setting status information. • Connection Mode • Antenna Level • Project.
the [ ], [ ], [ ], and [ ] buttons on the remote control or the [ w ], [ v ], [ a ], and [ b ] buttons (or the [Wide][Tele]) on the control panel to move the cursor to the desired key, and then press the [ ] button to enter the alphanumeric character.
Wireless LAN menu Submenu Function Wireless LAN Pow er Turn On when connecting the projector to the computer over wireless LAN. If you do not want to connect via wireless LAN, turn it Off to prevent unauthorized access by others. The default value is On .
Submenu Function IP S ettings (This item can only be set if Connection Mode is set to Advanced .) You can make network settings. DHCP : Set to On to make network settings using DHCP g . If this is set to On , you cannot set any more addresses. IP Address : You can input the IP address g assigned to the projector.
Submenu Function Encry pt ion K ey 1/ Encryption K ey 2/ Encryption K ey 3/ Encryption K ey 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates.
s "Using the Mail Notification Function to Report Problems" p.67 Submenu Function Mail Notifi c ation Set to On to send an email to the preset addresses when a problem or warning occurs with a projector. SMTP S erver You can input the IP address g for the SMTP server for the projector.
Submenu Function Tr a p IP Addr es s 1/ T rap IP Ad‐ dres s 2 You can register up to two IP addresses for the SNMP trap notification destination. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
Submenu Function Sleep M ode When set to On , this automatically stops projection when no image signal is being input and no operations are carried out for a specified length of time. Also, if no image signal is input for approximately five minutes, the lamp dims until the power turns off.
Submenu Function Sync Info You can display the image signal information. This information may be needed if service is required. Vi de o Si g n al You can display the settings for Video Signal in the Signal menu. Status This is information about errors that have occurred on the projector.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found..
If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a Press the [Help] button. The Help screen is displayed. Us in g th e re m o te c on tro l Us in g th e c on tro l pan e l b Select a menu item.
If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" be low. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.
Indi c ators Status Explanat ion Power suppl y S tatus Cool down status This is the status immediately after turning off the projector. In this st atus, all buttons are disabled.
Indi cators Cause R emedy or S ta tus Power sup‐ ply St at us Lamp T emper a ‐ ture Off Blue - Flash‐ ing Orange - Lit Off Lamp Error Lamp Failure Check the following two points. • Take out the lamp a nd check if it is cracked. s "Replacing the Lamp" p.
Indi cators Cause R emedy or S ta tus Power sup‐ ply St at us Lamp T emper a ‐ ture Blue - Flash‐ ing State de‐ pendant in‐ dication Orange - Flashing State de‐ pendant in‐ dication Replace Lamp Replace it with a new lamp. s "Replacing the Lamp" p.
When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue.
Problems Relating to Images No images appear Che ck Re m ed y Did you press the [ t ] power button? Press the [ t ] power button to turn the power on. Are the indicators switched off? The power cord is no t connected correctly or power is not being supplied.
Moving images are not displayed Che ck Re m ed y Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Change the image signal from the computer to external outp ut only.
The message "No Signal" is displayed Che ck Re m ed y Are the cables connected correctly? Check that all the ca bles required for projection are securely connected.
Che ck Re m ed y Is the keystone adjustment value too large? Lower the projec tion angle to reduce the amount of keystone corr ection. s "Adjusting the Image Position" p.
The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed Che ck Re m ed y Is a wide panel computer image being projected? (Only when projecting computer images) Change the setting according to the signal for the connected equipment.
Che ck Re m ed y Are the cables connected correctly? Check that all the ca bles required for projection are securely connected. Check that no cables are disconnected and that there are no poor contacts in the cables. s "Connecting Equipment" p.
Problems when Projection Starts The projector does not turn on Che ck Re m ed y Did you press the [ t ] power button? Press the [ t ] power button to turn the power on. Are the indicators switched off? The power cord is not connected correctly or power is not being fully supplied.
Che ck Re m ed y Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.54 Is the audio cable's specification "No resistance"? When using a co mmercially available audio cable, make sure it is labeled "No resistance".
I want to change the langua ge for messages and menus Che ck Re m ed y Change the Language setting. Adjust the Lang uage setting from the Configuration menu.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of perfor mance from th e projector fo r a lo ng time to come.
You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Caution Turn off the projector's power before cleaning. Otherwise, it could cause an electric shock. Cleaning the Projector's Surface Clean the projector's surface by wipi ng it gently with a soft cloth.
a • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it w ith a new air filter. s " R e p l a c i n g t h e A i r F i l t e r " p.111 • It is recommended that you clean these parts at least once every three months.
This section explains how to replace the lamp and the air filter. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "Time to replace the lamp. Please cont act your Epson projector reseller or visit www.
Warning • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on th e ceiling, you should always assume that the lamp is cracked, a nd you should stand to the side of the lamp cover, not underneath it.
d Grip the raised section of the old lamp and remove it. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice.
f R e p l a c e t h e l a m p c o v e r . Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamps turn off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the lamp will not turn on.
d Install the new air filter. Slide t he air filter from the outside and press in until it firmly clicks into pla ce. e C l o s e t h e a i r f i l t e r c o v e r .
Appendix.
EasyMP Network Projection You can project your co mputer's scr een over a network by using EasyMP Network Projection. Sharing the projec tor over the network allows you to project data from different computers without changing the signal cable. Even if the projector is away from the computer, you can still project data via a network.
The followi ng optional accessories an d consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: May 2013. Details of accessories are subject to change wi thout notice and availability may vary depending on the country of purchase.
Projection Distance (For EB-W18) A Projection distance B Distance from the center of the receiver's lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Cen.
Unit: cm 16:10 Sc ree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 35" 76x47 97 - 117 -4 40" 86x54 111 - 134 -5 50" 110x67 139 - 168 -6 60" 130x81 168 - 202 -7 80" 170x1.
4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 60" 120x91 171 - 206 -10 80" 160x120 229 - 275 -13 100" 200x150 287 - 345 -16 150" 300x230 432 - 519 -24 200" 410x.
4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 60" 120x91 180 - 217 -10 80" 160x120 241 - 290 -14 100" 200x150 302 - 363 -17 150" 300x230 454 - 546 -25 200" 410x.
Projection Distance (For EB-S18) A Projection distance B Distance from the center of the receiver's lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Cen.
Supported Resolutions Computer signals (analog RGB) For EB- X24/EB- W18/EB -X18 Signal Refr esh Rate (Hz) Resolu tion (d ots) VGA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x7.
Si g n al Re fres h Rat e (H z ) Res o lu tio n (d ot s ) SDTV (480p) 60 720x480 SDTV (576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 Composite video Si g n al Re fre sh Ra t.
Projector General Specifications Prod uc t nam e EB-X24 EB-W18 EB-X18 EB-S18 Dimens ions 297 (W) x 79 (H) x 234 (D) mm LCD panel size 0.63" 0.59" Wide 0.
Vi d e o p o r t 1 RCA pin jack S- V id eo po rt 1 Mini DIN 4- pin Audi o p ort 1 RCA pin jack x 2 HDMI port 1 HDMI (Audio is only supported by PCM) USB -A por t * 1 USB connector (Type A) USB -B por t * 1 USB connector (Type B) * U S B 2 . 0 i s s u p p o r t e d .
This product is also designed for IT power dist ribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc.
297 93 38.3 79 A Center of lens B Distance from center of lens to suspension bracket fixing point 99.6 3-M4 x 9 31.8 234 15.9 12 123.4 242 Units: mm Appearance 127.
This section briefly explains the difficult terms that are no t expl ained in the text of this guide. For details, refer to other commercially available publications. Ad h oc mod e A method of wireless LAN connection that communicates with wireless LAN clients without using an access point.
sRGB An internation al standard for color intervals that was formulated so that colors that are reprod uced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, wit hout the prior written permission of Seiko Epson Corporation.
General Notice: IBM, DOS/V, and XGA are trademarks or r egistered trademarks of International Business Machines Corporation. Mac and Mac OS are trademarks of Apple Inc. App Store is a service mark of Apple Inc. Google play is a trademark of Google Inc.
A A/V Mute ...................... ................................ 54 A/V Mute Timer . ................... ...................... 87 Air exhaust vent ........... ...................... .......... 10 Air filter replacement pe ri od ......... ..........
Mail Noti ficatio n menu ................. ............. 8 4 Messages .............. ....................... ............. ..... 79 Monitor Displays .. ........................... .......... 121 Mouse pointer ....... .................... .............
USB-B port .......... ............................... .......... 12 User button .............. ..................................... 78 User's Logo ......... ................. ............... .......... 58 User's Logo Prot ection ...........
An important point after buying a device Epson EB-S18 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson EB-S18 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson EB-S18 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson EB-S18 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson EB-S18 will certainly help you make a decision on the purchase.
If you already are a holder of Epson EB-S18, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson EB-S18.
However, one of the most important roles played by the user manual is to help in solving problems with Epson EB-S18. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson EB-S18 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
