Instruction/ maintenance manual of the product EB-905 Epson
Go to page of 158
User’s Guide.
Notations Used in This Guide • Safety indications The documentation and th e projector u se graphical sy mbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property.
Notations Used in This G u i d e ........................ 2 Introduction P r o j e c t o r F e a t u r e s .......................................... 7 L i s t o f F u n c t i o n s b y M o d e l ............................... ......... 7 Q u i c k a n d E a s y S e t u p , P r o j e c t i o n , a n d S t o r a g e .
Useful Functions P r o j e c t i o n F u n c t i o n s ......... .............................. 4 6 P r o j e c t i n g W i t h o u t a C o m p u t e r ( S l i d e s h o w ) ............ ........... .... 4 6 Specifications for files that can be pr o j e c t e d u s i n g S l i d e s h o w .
P r o b l e m s R e l a t i n g t o I m a g e s ...................................... 9 9 N o i m a g e s a p p e a r .............. ........... .......... ........ 9 9 Moving images are not displayed (only the moving image portion turns black) .....
Introduction This chapter explains the projector's features and the part names..
List of Functions by Model Available functions differ depending on the model being used . Se e t h e t a b l e b e l o w f o r a l i s t o f t h e f u n c t i o n s a v a i l a b l e f o r e a c h m o d e l .
Quick and Easy Set up, Projection, and Storage • Turn the projector on and off by simply plugging in or unplugging. • Project onto large screens from a short distance. • Make easy height adjustment s with one lever. • N o c o o l d o w n d e l a y m a k e s i t e a s y t o p u t a w a y .
Easy connection to a comp uter with Quick Wireless By simply connecting the optional Quick Wireless Connection USB Key to a computer, you can project the computer's screen.
All of the features in this guide are e x p l a i n e d u s i n g i l l u s t r a t i o n s o f E B - 9 2 5 unless otherwise mentioned. Front/Top Name Function A Air exhaust ven t Exhaust vent for air used to cool the projector internally.
Rear Name Function A HDMI port Inputs video signals from HDMI compatible video equipment and computers. Th is projector is compatib le with HDCP g . s "Connecting Equipment" p.22 B Pow er in let Connects the power cable to th e projector. s "From Installation to Projection" p.
Base Name Function A C eilin g m oun t fixing po ints (thre e p oin ts) Attach the optional Ceiling Mount here when suspending the projector from a ceiling.
Control Panel Name Function A [ t ] button Turns the projector power on or off. s "From Installation to Projection" p.30 B [Sour ce Sear ch] button Changes to the next input source that is sending an image. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.
Remote Control Name Function A [ t ] button Turns the projector power on or off. s "From Installation to Projection" p.30 B [Computer] button Each time you press the button, the input changes between images from the Computer1 port and th e Computer2 port.
Name Func tion J [E-Zoom] buttons [ z ][ x ] Enlarges or reduces the image without changing the projection size. s "Enlarging Part of the Image (E-Zoom)" p.53 K [Menu] button Displays and closes the Configuration menu. s "Using the Configuration Menu" p.
Name Func tion X Remote c ontr ol light- emitting area Outputs remote control signals. Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time , it probably means that the batteries are becoming flat.
Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. c R e p l a c e t h e b a t t e r y c o v e r .
Preparing the Projector This chapter explains how to install the projector and connect projection sources..
Installation Methods The projector supports the following four different projection methods. Install the projector according to the co nditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen.
• Install the projector so that it is parallel to the screen. If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. • Place the projector on a level surface. If the projector is tilted the projected image is also tilted.
EB-96W (110×67cm) (170×110cm) (220×130cm) (320×200cm) 50” 80” 100” 150” 4:3 Screen Size EB-925/EB-905 EB-900 5m 50” 80” 100” 150” EB-95 Installing the Projector 21.
Illustrations in this section are of EB-925/EB-915W/EB-905/EB-96W/EB-95. The port name , location, and connector orientation differ depending on the sour ce being connected. Connecting a Computer To project images from a computer, connect th e computer using one of the following methods.
Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video or S-video cable Connect the video or S-video output port on the im age source to the projecto r's Video or S-Video port.
Attention • If the input source is on when you connect it to the projector, it co uld cause a m alfunction. • If the orientation or shape of the plug differs, do not try to force it in .
Connecting USB Devices You can connect devices such as USB memory, the optional Docume n t C a m e r a , a n d U S B c o m p a t i b l e h a r d d i s k s a n d d i g i t a l c a m e r a s . Using the USB cable supplied with the USB device, connect th e USB device to the USB(TypeA) port on the projector.
Removing USB devices After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector. Connecting External Equipment You can output images and audio by connectin g an external monitor or speaker.
a • If you set Standby Mode to Co mmunication On , you can perform the following operations even if the projector is in standby mode. - Outputting images to an external monitor - Outputting microphone audio from the projector's speaker (only when Standby Microphone is set to On ).
Installing the Wireless LAN Unit a Open the air filter cover. Slide the air filter cover open/close switch, and open the air filter cover. ② ① b R e m o v e t h e s t o p p e r f o r t h e W i r e l e s s L A N u n i t . ② ① c Install the Wireless LAN unit.
Basic Usage This chapter ex plains how to project and adjust images..
From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. b 1 2 3 ON 6 5 4 a Connect the projector to an electrical outlet with the power cable. b Connect the projecto r to the computer with the comput er cable.
Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Because only images from ports receiving an image are projected, you can quickly project the image you want.
Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Rem ote c on trol A Each time the button is pressed.
For Mac OS OS Mac OS X 10.5.1 or later Mac OS X 10.6.x CP U Power PC G4 1GHz or faster Recommended: Core Duo 1.83GHz or faster Amount of Mem ory 512 MB or more Hard Disk Spac e 20 MB or more Dis pla y Resolution of no less than 640x480 and no higher than 1680x1200.
a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer. • If nothing is projected for some reason, click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx on your computer.
c Select Epson USB Display and click Uninsta ll . For Mac OS a Open the Applicat ions folder, doucle-click USB Display , a n d t h e n double-click Tool .
Correcting Keystone Distortion You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) Automatically corrects vertical keystone distortion. • Correcting manually (m anua l H/V- Keystone) Manually correct distortion in th e horizontal and vertical directions independently.
Correcting keystone distortion in horizontal directions Press the [ ][ ] buttons on the control panel. a You can set manual H/V -Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone p.80 Correcting manually (Quick Corner) This allows you to manu ally correct each of the four corners of the projected image separately.
d Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ ], [ ], [ ], and [ ] buttons on the control panel, select the corn er to correct, and then press the [Enter] button.
g When you are do ne, press the [Esc] b utton to exit the correction menu. Because Keystone was changed to Quick Corner , t h e c o r n e r selection scree n from step 3 is displayed when you press the [ ], [ ], [ ], and [ ] buttons on the control panel next time.
A Extend the rear foot. B Retract the rear foot. Correcting the Focus You can correct the focus using the focus ring. Adjusting the Volume You can adjust the volume using one of the following methods. • Press the [Volume] button on the control panel or the remote control to adjust the volume.
Mod e App lic ation Pr esen ta tion Ideal for making presentations using color materials in a bright room. The at re Ideal for watching films in a dark room. Gives images a natural tone. Pho to *1 Ideal for projecting still pictures, such as photos, in a bright room.
c Select On . The setting is stor ed for each Color Mode. d Press the [Menu] button to finish making settings. a Auto Iris can only be set when the Color Mode is Dynamic or Theatre .
Projecting images from a computer The following shows projection examples for each aspect mode. Aspect Mode Input Si gnal XGA 1024X7 68(4:3) W XGA 1280X80 0(16:10) Normal 16:9 Full Zoom Native a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel.
A Auto B 4:3 C 16:9 Projecting images from a computer Each time the [Aspect] button on the remote control is pressed, the aspect mode changes in the order Normal , 4:3 , a n d 16:9 .
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions..
Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB memory or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. a • You may not be able to use USB storage devices that incorporate security functions.
b Connect the US B storag e device or dig ital camera to t he projec tor. s "Connecting USB Devices" p.25 Slideshow starts and the file list screen is displayed. • JPEG f iles are displayed as thumbnails (file contents are displayed as small images).
a If not all of the files and folders are displayed on the current screen, press the [Down] button on the remote control, or position the cursor on Next Page at the bottom of the screen and press the [Enter] button.
b Press the [ ], [ ], [ ], and [ ] buttons to select the image file you want to project. c Press the [Enter] button. T h e i m a g e i s d i s p l a y e d . a Press the [ ][ ] buttons to move to the next or previous image file. d Press the [Esc] button to return to the file list screen.
a If Screen Swi tching Time on the Option screen is set to No , f i l e s d o not change automatically when you select Play Slideshow. Press the [ ] button, the [Enter] button, or the [Down] button on the remote control to continue to the next file.
Hiding the Image and Sound Temporarily (A/V Mute) You can use this when you want to fo cus the audience's attention on what you are saying, or if you do not want to show details such as when you are changing between files during presentations from a computer.
a • Audio does not stop. • For moving images, the images continue to play back while the s c r e e n i s f r o z e n , s o i t i s n o t p o s s i b l e t o r e s u m e p r o j e c t i o n f r o m t h e p o i n t w h e r e t h e s c r e e n w a s f r o z e n .
Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to see them in greater detail, such as graphs and tables. a Start E-Zoom. Press the [ z ] button to display the Cross ( ). Re m o t e c o n t ro l b Move the Cross ( ) to the area of the image tha t y ou want to enlarge.
U s i n g t h e R e m o t e C o n t r o l t o O p e r a t e t h e M o u s e Pointer (Wireless Mouse) You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. The following oper ating systems are compatible with Wireless Mouse.
Page Up/Down [Up] button: Moves to the previous page. [Down] button: Moves to the next page. a • When pressed in co njunction with the adjacent [ ], [ ], [ ], and [ ] buttons, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed.
a • When User's Logo Protect from Passw ord Prote ct is set to On , a message is displayed a nd the User's Logo cannot be changed. You ca n make changes after setting User's Logo Protect to Off . s "Managing Users (Password Protect)" p.
f Select the zoom factor from the zoom setting screen. g W h e n t h e m e s s a g e " S a v e t h i s i m a g e a s t h e U s e r ' s L o g o ? " i s displayed, select Yes . The image is saved. After the image has been saved, the message "Completed.
a If User Pattern is selected when Keystone, E-Zoom, Aspect, or Zoom adjustment are being performed, the function currently b e i n g p e r f o r m e d i s c a n c e l l e d . d W h e n " D o y o u w a n t t o u s e t h e c u r r e n t l y p r o j e c t e d i m a g e a s t h e User Pattern?" is displayed, select Yes .
The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing th e settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.
a • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.60 • When the password is set, stick the supplied password protect sticker in a visible position on the projector as a further theft deterrent.
When you enter the correct passwor d, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be lock ed." is displayed for approximately five minutes, and then the projector switches to standby mode.
d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods. • Select Of f from Control Pane l Lock . s Settings - Control Panel Lock p.
About EasyMP Monitor EasyMP Monitor lets y ou carry out operations such as checking the status of mu lti ple Ep son pr o je cto r s tha t ar e con nec t ed to a net wor k at a com p ut e r monitor, and controlling the projectors from the computer. You can download EasyMP Moni tor from the following Web site.
Items in the Configuration menu that cannot be set by a Web browser • Settings menu - Keystone - Quick Corner • Settings Menu - Pointer Shape • Settings Menu - Pattern • Settings Menu - User B.
Name Func tion A [ t ] button Turns the projector power on or off. s "From Installation to Projection" p.30 B [Computer ] but ton Each time the button is pr essed, input changes between images from the Computer1 port and the Computer2 port.
Using the Mail Notification Function to Report Problems When you set Mail Notification, notifi cation messages are sent to the preset email addresses when a problem or warning occurs with a projector. This will enable the operator to be notified of problems with projectors even at locations away from the projectors.
a • SNMP should be managed by a network administrator or someone who is familiar with the network. • To use the SNMP function to monitor the projector, you need to install the SNMP manager program on your computer. • The managing function using SNMP cannot be use d via wireless LAN in Quick connection mode.
• Projector input port name: RS-232C < At the pr ojec tor> < At the co mputer> < At the pr ojector > (P C seri al c abl e) <At the computer > Sig nal N am e F un c tion GND S.
• Manufacturer name display ed for "Manufacture name information query" EPSON • Model name displayed for "Pro duct name information query" EB-925/C2080XN/PowerLite 1835 EB-915W.
a Start a Web browser on the computer. b Enter the IP address of the projector in the address field of the Web browser, and press the Enter key on the keyboard. The operation window is di splayed. Using the operation window A You can perform the following operat ions when you click the buttons.
Bu tton Func tion OK Performs the same operation as the [Enter] button on the remote control. s "Remote Control" p.14 Menu Displays and closes the Con figuration menu. Auto If clicked while projecti ng analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adju sting the Tracking, Sync.
Item Func tion DHCP Select the Enabled check box to use DHCP. You cannot enter an IP address if DHCP is enabled. IP Address Enter the IP address to assign to the currently connected projector. Subnet Mask Enter a subnet mask for the currently connected projector.
Configuration Menu This chapter explains how to use the Configuration menu and its f unctions..
This section explains how to use th e Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.
Configuration Menu Table Settable items vary depending on the model being used and the image signal and source being projected. To p Men u Na me Su bmenu Na me It ems or S ett ing V a lu es Image menu s p.
To p Men u Na me Su bmenu Na me It ems or S ett ing V a lu es Plug-in Power On and Off USB Type B USB Display and Wireless Mouse Language 15 or 35 languages * 1 Info menu s p.91 Lamp Hours - Source - Input Signal - Resolution - Video Signal - Refresh Rate - Sync Info - Status - Serial Number - Event ID - Reset menu s p.
To p Men u Na me Su bmenu Na me It ems or S etti ng V al ues Address 1 Setting, Ad- dress 2 Setting, and Ad- dress 3 Setting - Others menu s p.90 SNMP On and Off Trap IP Address 1 and Trap IP Address .
Submenu Function Abs. C olo r Temp. (This item cannot be selected if Color Mode is set to sRGB g .) You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. The image is tinted blue when a high value is selected and tinted red when a low value is selected.
Submenu Function Pr ogressive (This setting can only be adju sted when a component video or RGB video with an interlaced si gnal (480i/576i/1080i) is input. This cannot be set when a digital RGB signal is input.) Interlace g (i) signal is converted to Progressive g (p).
Settings Menu Submenu Function Ke ys t o ne You can correct keystone distortion. • When H/V-Keystone is selected: • Correcting manually Adjust V-Keystone and H-Keysto ne to correct horizontal and vertical keystone distortion. • Correcting automatically Set Auto V-Keystone to On .
Submenu Function User B utton You can select and assign an item from the Configuration menu with the remote control's [User] button. Pre ssing the [User] button directly displays the assigned menu item selection/ adjustment screen, allowing you to make one-touch changes to settings/adjustments.
Submenu Function Displ ay You can make settings related to the projector's display. Messages : W h e n s e t t o Off , the following items will not be displayed. Item names when the Source, Color Mode, or Aspect Ratio is changed, messages when no signal is being input, and warnings such as High Temp Warning.
Submenu Function Plu g - in Pow er When set to On you can use a microphone with Plug-i n Power support. USB Ty pe B Set to USB Display when the projector and a computer are connected by a USB ca ble and computer images are projected. s "Projecting with USB Display" p.
Submenu Function Network Config- ura tion The following menus are available for setting Network items. Basic , Wireless LAN , Se curity , Wired LAN , Mail , Others , Reset , and Complete * Displays available region information for the Wireless LAN unit being used.
Basic menu Submenu Function Proje c to r Nam e Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanum eric characters . PJLink Password Set a password to use when you access the projector using compatible PJLink softw are.
Submenu Function Co nnec tion Mod e Set the connection mode when using EasyMP Network Projection to connect the projector and computer. This is set to Quick by default. See the following manual for details on connection mode. s EasyMP Network Projection Operation Guide Cha n ne l (This can only be set if Connectio n Mode is set to Quick .
Security menu Submenu Function Sec urity Select the security type from the items that are displayed. When setting up Security, follow the instructions from the administrator of the network system you are about to access. WEP Enc r yption You can set the encryption for WEP encryption.
• WPA This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses TKIP and AES.
Submenu Function IP Addr ess Dis- pla y To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off . Mail menu When this is set, you receive an email notification if a problem or warning occurs in the projector.
Others menu Submenu Function SNMP Set to On to monitor the projector using SNMP. To monitor the projector, you need to install the SNMP manager program on your computer.
Reset menu Resets all of the network settings. Submenu Function Reset network settings. To reset all of the Network settings, select Yes . Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector.
Submenu Function Status This is information about errors that have occurred on the projector. This information may be needed if service is required. Serial Numb er Displays the projector's serial number. Even t ID Displays the application error log.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found..
If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a Press the [Help] button. The Help screen is displayed. Us in g th e rem ote c o nt rol Us in g th e c on tro l pan el b Select a menu item.
If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" be low. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cable is conne cted correctly and that the power is being supplied normally.
Sta tus Caus e R emedy or St atus If it is not cracked : Reinstall the lamp and turn on the power. If the error continues : Replace the lamp with a new one and then turn on the power.
When the Indicators Provide No Help If any of the following problems occur and the indicators do no t offer a solution, refer to the pages given for each problem. Problems Relating to Images • No images appear Projection doe s not start, the projection area is completely black, or the projection area is completely blue.
Problems Relating to Images No images appear Che ck Re m ed y Did you press the [ t ] button? Press the [ t ] button to turn the power on. Are the indicators switched off? The power cable is no t connected correctly or power is not being supplied. Connect the projector's power cable correctly.
Moving images are not displayed (only t h e m o v i n g i m a g e p o r t i o n t u r n s b l a c k ) Che ck Re m ed y Is the computer's image signal being output to the LCD and the monitor? (Onl.
Che ck Re m ed y Are the image signals being output to the projector? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) If the image signals are only being .
Interference or distortion appear in images Che ck Re m ed y Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Sign al p.
Che ck Re m ed y Is the computer set for dual display? (Only when projecting computer images) If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the computer screen is projected.
Images appear dark Che ck Re m ed y Is the image brightness set correctly? Adjust the Brightness and Power Consumption settings from the Configuration menu. s Image - Brightness p.77 s Settings - Power Consumption p.80 Is the contrast g adjusted correctly? Adjust the Contrast setting from the Configuration menu.
Other Problems No sound can be heard or the sound is faint Che ck Re m ed y Check that the audio/video cable is securely attached to both the projector and audio source. Disconnect the cable from the Audio port, and then reconnect the cable. Is the volume adjusted to the minimum setting? A djust the volume so that sound can be heard.
The remote control does not work Che ck Re m ed y Is the remote control light-emitting area pointing towards th e remote receiver on the projector during operation? Point the remote control towards the remote receiver. s "Remote control operating range" p.
Che ck Re m ed y Is power being supplied to the projector? Check that your el ectrical outlet or power source is functioning correctly. Is the Mail Notification function set correctly in the Configuration menu? An error notification email is sent according to the Mail settings in the Configuration menu.
Check the numbers and then apply the follow ing countermeasures. If you cannot resolve the problem, contact your network adminis trator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Ev ent I D Cause R emedy 0432 0435 Failed to startup EasyMP Network Projection.
Maintenance This chapter provides information on maintenance procedures to ensure th e best level of perfor mance from the projector for a lo ng time to come.
You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention Turn off the projector's power before cleaning. Cleaning the Projector's Surface Clean the projector's surface by wipi ng it gently with a soft cloth.
a • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it w ith a new air filter. s " R e p l a c i n g t h e A i r F i l t e r " p.116 • It is recommended that you clean these parts at least once every three months.
This section explains how to replace the lamp and the air filter. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "Time to replace the lamp. Please contact your Epson projector reseller or visit www.
Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images.
c Loosen the two lamp fixing screws. d Take out the old La mp by pulling the handle. If the Lamp is cracked, replace it with a new lamp, or contact your l o c a l d e a l e r f o r f u r t h e r a d v i c e .
e Install the new lamp. Insert the new Lamp along the guide rail in the correct direction so t h a t i t f i t s i n p l a c e , p u s h i n f i r m l y , a n d o n c e i t i s f u l l y i n s e r t e d tighten the two screws. ② ① f R e p l a c e t h e l a m p c o v e r .
Replacing the Air Filter Air filter replacement period It is time to replace the air filter when: • There is a tear in the air filter. • The message is displayed even though the air filter has been cleaned. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling.
Appendix.
The followi ng optional accessories an d consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is curre nt as of: October 2010. Details of accessories are subject to change wi thout notice and availability may vary depending on the country of purchase.
Projection Distance (For EB-925/EB-905) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Center of le.
Projection Distance (For EB-915W) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Center of lens Uni.
Unit: cm 16:10 Sc ree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 30" 64x40 88 - 144 -1 40" 86x54 118 - 193 -1 50" 110x67 149 - 243 -2 60" 130x81 179 - 292 -2 80" 170x1.
4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 60" 120x91 153 - 184 -8 80" 160x120 205 - 246 -11 100" 200x150 256 - 308 -14 150" 300x230 385 - 462 -21 200" 410x3.
Projection Distance (For EB-900) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Center of lens Unit.
Projection Distance (For EB-96W) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Center of lens Unit.
Unit: cm 16:10 Sc ree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 35" 76x47 97 - 117 -4 40" 86x54 111 - 134 -5 50" 110x67 139 - 168 -6 60" 130x81 168 - 202 -7 80" 170x1.
4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 60" 120x91 180 - 217 -10 80" 160x120 241 - 290 -14 100" 200x150 302 - 363 -17 150" 300x230 454 - 546 -25 200" 410x.
Supported Resolutions Computer signals (analog RGB) Signal R efresh R ate (Hz) R eso lutio n (do ts) VGA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 WXGA 60 1280x768 60 13.
Si g n al Re fres h Rat e ( Hz ) Re so lu ti o n ( d o ts ) SDTV (480i/480p) 60 720x480 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 192.
Projector General Specifications Prod uc t n ame EB-925 EB-915W EB-910W EB-905 Dimens ions 345 (W) x 93 (H) x 263 (D) mm LCD panel size 0.63" 0.59" Wide 0.
Mass Approx. 3.4 kg Approx. 3.2 kg Approx. 3.4 kg Prod uc t n ame EB-900 EB-96W EB-95 Dimens ions 345 (W) x 93 (H) x 263 (D) mm LCD panel size 0.55" 0.
Mass Approx. 3.1 kg Approx. 3.3 kg Approx. 3.2 kg Connec t or s C omputer1 por t 1 Mini D-Sub15-pin (female) Comp u t er 2 p or t 1 Mini D-Sub15-pin (female) Vi de o p o r t 1 RCA pin jack S- V id eo .
This product is also designed for IT power dist ribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc.
EB-925/EB-915W/EB- 905 A Center of lens B Distance from center of lens to suspension bracket fixing point Units: mm Appearance 134.
EB-910W/EB-900/EB-96W/EB -95 A Center of lens B Distance from center of lens to suspension bracket fixing point Units: mm Appearance 135.
This sec tion briefl y explain s the difficult terms that are not expl aine d in the text of this guide. For details, refer to other commercially available publications. AMX De vic e Disc overy AMX Device Discovery is a technology develo ped by AMX to facilitate AMX control system s for easy operation of the target equipm ent.
sRGB An internation al standard for color intervals that was formulated so that colors that are reprod uced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, wit hout the prior written permission of Seiko Epson Corporation.
GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Versio n 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product.
GNU GENE R AL P UB LI C LICENSE TE RM S A ND CONDITI ONS FOR COPY ING , DIST RI B UT ION AND MODIFICAT ION 0. This License applies to any program or other work which contains a notice pla ced by the copyright holder saying it may be distributed under the terms of this General Public License.
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the progr am in obje ct code or executable form with such an offer, in accord with Subsection b above.
Each version is given a distinguishing ve rsion number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and condit ions either of that version or of any later version published by the Free Softw are Foundation.
<signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a su broutine library, you may consi der it more useful to permit linking proprietary applications with th e library.
Finally, software patents pose a constant th reat to the existence of any free program. We wish to make sure that a company cannot effe ctively restrict the users of a free program by obtaining a restrictive license from a patent holder.
a) The modified work must itself be a software library. b) You must cause the files m odified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
If such an object file uses only nu meri cal parameters, data structure layouts and accessors, and small macros and smal l inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.
9. You are not required to accept this Lice nse, since you have not signed it. However, nothing else grants you permission to m odify or distribute the Library or its derivative works. These actions are prohi bited by law if you do not accept this License.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGH T HOLDER, OR ANY OTHE R PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRA RY AS PERMITTED ABOVE, BE LIABLE .
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, I NCLUDING, BUT NOT LIMITED TO, THE I MPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOS E ARE DISCLAIMED.
The Unix configuration script "configu re" was produced with GNU Autoconf. It is copyright by the Free Software Foundation bu t is freely distributable. Th e same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh).
libpng versions 0.5, May 1995, through 0. 88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and licens e, "Contributing Authors&q.
If you redistribute modified sources, we wo uld appreciate that you include in the fi le ChangeLog history information documenting y our changes. libmd5- r fc This projector product includes the open .
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred fo rm for making modifications, including but not limited to software source code , documentation source, and configuration files.
You may add Your own copyright statem ent to Your modifications and may provide additional or different license te rms and conditions for use, reproduction, or distribution of Your modifications, or f.
aes-src-29-04-09 License terms of conditions of each program which are provided by owner of the copyright to the “aes-src-29-04-09” are as follows.
A A/V Mute ...................... ................................ 51 Abs. Color Temp. .......... .................... .......... 78 Air exhaust vent ........... ...................... .......... 10 Air filter replacement pe ri od ......... ..........
Monitor Displays .. ........................... .......... 127 Mouse pointer ....... .................... ................... 54 N Network Configura tio n .............................. 84 Network information .... ............... ............... 83 Network Menu .
User Button ........ ............................... ........... 81 User Pattern .................. .................. .............. 57 User's Logo ......... ................. ............... .......... 55 User's Logo Protect ..... ........
An important point after buying a device Epson EB-905 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson EB-905 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson EB-905 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson EB-905 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson EB-905 will certainly help you make a decision on the purchase.
If you already are a holder of Epson EB-905, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson EB-905.
However, one of the most important roles played by the user manual is to help in solving problems with Epson EB-905. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson EB-905 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
