Instruction/ maintenance manual of the product CPD5719 Epson
Go to page of 12
EPSON ® Ethernet Card Supplement This guide includes new information about your EPSON ® multiprotocol Ethernet interface card and software. If you are using the card with Apple ® Macintosh a comput.
Initializing the Ethernet Card After you install the Ethernet card in a printer or reinstall it in a new printer, plug in the printer while pressing down the status sheet button for at least three seconds to initialize the card.
Using Macintosh with the Ethernet Card Before configuring the Ethernet card, check to see if the correct printer driver is installed in the Macintosh. Make sure the printer is turned on and the Ethernet card is connected to the network. (See your Ethernet card User’s Guide and your printer User’s Guide for more information.
To check the status of all printers that are turned on and enabled for a protocol, follow the steps below: 1. Open the EPSON Net! folder and click the EPSON Net! icon.
2. Click a zone to select it, press and hold the Shift key while clicking multiple zones to select them, or click Select All. 3. Click OK . EPSON Net! sends a packet to the selected zones and detects the current printer’s status. The EPSON Net! dialog box shows the latest information about the printers located in that zone.
Setting the Refresh lnterval Follow these steps to set the refresh interval for the settings in the EPSON Net! dialog box: 1. With the EPSON Net! dialog box open, choose Preferences from the Options menu bar. Refresh interval (sec) pq (DKI [Cancel ) 2.
2. Highlight the printer you want to configure in the list. 3. Click Open. You see the Configuration dialog box: 4. Click the AppleTalk icon. Make sure the correct serial number of your Ethernet card is displayed.
6. Click OK to send the new settings to the Ethernet card and return to the EPSON Net! dialog box. Click Update to send the new settings to the card without closing the Configuration dialog box. Caution: Once you make changes to the Ethernet card, wait at least five minutes before turning off or restarting your printer.
4. Click the TCP/IP icon. Make sure the Configuration dialog box shows the correct serial number of the target Ethernet card. 5. Set the following options in the TCP/IP Configuration dialog box: U IP address: Determine and assign an IP address for the Ethernet card.
4. Click Protocol and then the Add button. 5. Select Microsoft from the Manufacturers list and TCP/IP from the Network Protocols list. Then click OK. 6.
ping <IP address> for example: ping 127.0.1.200 You see a message similar to the following: Reply from 127.0.1.200: bytes=32 time<10ms TTL=30 Reply from 127.0.1.200: bytes=32 time<10ms TTL=30 Reply from 127.0.1.200: bytes=32 time<l0ms TTL=30 Reply from 127.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. I Copyright 0 1997 by Epson America, Inc.
An important point after buying a device Epson CPD5719 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson CPD5719 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson CPD5719 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson CPD5719 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson CPD5719 will certainly help you make a decision on the purchase.
If you already are a holder of Epson CPD5719, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson CPD5719.
However, one of the most important roles played by the user manual is to help in solving problems with Epson CPD5719. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson CPD5719 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
