Instruction/ maintenance manual of the product 820 Epson
Go to page of 5
820 CFS Installation Instructions Pre-Filled CFS Below are the instructions for installing a pre-filled CFS for an Epson 820 printer. Here is what you will need to do this installation….
Cartridge Installation 4. Check the CFS cartridge, there should be 4 Velcro st rips on each cartrid ge. You may have to guide these pads into the cartridge holder, it is a tight fit. Push the cartridg e all the way down, so printer po sts puncture the seals on the bottom of the cartrid ge.
Tubing Installation 8. Move the cartridges towards the left side of the printer, but don’t push them unde r the housing. Get the end of the tubing that you left hanging off the right side of the printer. Loop it back towards the left side of the printer, under the Bridge Bracket.
Trim each tube length so that the tube will make a tu rn into the bottle without rising up. There must be 3 ¾ inch of tubing inside the bottle. When you cut the t ube, cut on a 45 degree angle so the end of the tube is pointed. After you cut the tubes to length, use a black marker and make a mark on each tube 3 ¾ inch from the end of the tube.
If you purchased your CFS unit before 4/28/03, then it ship ped with an F-1 6 chip resetter. After 4/28, the F-16 was replaced by Auto Reset chips. The F-16 will no t work with the Silver 820 printers, sometimes called the 820S. If you have an 820 with the silver housing and an F-16 Chip Resetter, give us a call.
An important point after buying a device Epson 820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson 820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson 820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson 820 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson 820 will certainly help you make a decision on the purchase.
If you already are a holder of Epson 820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson 820.
However, one of the most important roles played by the user manual is to help in solving problems with Epson 820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson 820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
