Instruction/ maintenance manual of the product 800P Epson
Go to page of 2
EPSON ® PowerLite ® 600p/800p/810p Quick Setup Connect the power cord to your projector and plug the other end into a grounded outlet. 3 Connect the other end to your laptop’s video or monitor port. 1 T urn on the projector first. To do so, press the red Power button.
If you see a blank screen or the No Signal message after turning on your laptop, check the following: Á Make sure the power light is green and not flashing and the lens cover is off.
An important point after buying a device Epson 800P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson 800P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson 800P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson 800P you will learn all the available features of the product, as well as information on its operation. The information that you get Epson 800P will certainly help you make a decision on the purchase.
If you already are a holder of Epson 800P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson 800P.
However, one of the most important roles played by the user manual is to help in solving problems with Epson 800P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson 800P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
