Instruction/ maintenance manual of the product 800 Epson
Go to page of 10
Epson PowerLite Pro Cinema 800 11/05 Epson PowerLite Pro Cinema 800 - 1 Projector Parts Projector Specifications General Type of display Poly-silicon Thin Film Transistor (TFT) active matrix Size of LCD panels Wide: 0.7 inches (18 mm) Lens F=2.1 to 2.
Epson PowerLite Pro Cinema 800 2 - Epson PowerLite Pro Cinema 800 11/05 Electrical Rated frequency 50/60 Hz Power supply 100 to 120 V: 2.7 A 200 to 240 V: 1.
Epson PowerLite Pro Cinema 800 11/05 Epson PowerLite Pro Cinema 800 - 3 If you place the projector above or below screen level, you’ll have to tilt it up or down to aim the image at the s creen; this distorts (or “keystones”) the sh ape of the image, but you can correct it using the projector’s Keystone function (see page 6).
Epson PowerLite Pro Cinema 800 4 - Epson PowerLite Pro Cinema 800 11/05 Cable Connections You can connect up to five pieces o f video equipment to the projector, using the ports listed below (cables are not included): For best results, connect your video equipment to the HDMI (High-Definition Multim edia Interface) port.
Epson PowerLite Pro Cinema 800 11/05 Epson PowerLite Pro Cinema 800 - 5 Compatible Video Formats The projector supports NTSC, PAL, and SECAM, as well as the digital video formats listed below. Turning the Project or On and Off 1. Connect the power cord to the projector and a grounded electrical outlet.
Epson PowerLite Pro Cinema 800 6 - Epson PowerLite Pro Cinema 800 11/05 If you press the Source button on the projector, you see a menu of available sources.
Epson PowerLite Pro Cinema 800 11/05 Epson PowerLite Pro Cinema 800 - 7 When you select an Aspect setti ng, the resolution at which the image di splays depends on the currently active picture source. T he resolutions for all video formats and aspect ratio settings are listed below.
Epson PowerLite Pro Cinema 800 8 - Epson PowerLite Pro Cinema 800 11/05 Projector Status Lights If your projector isn’t working correctly, first turn it off, wait for the warning light to turn a steady orange, turn off the power switch on the back, and unplug it.
Epson PowerLite Pro Cinema 800 11/05 Epson PowerLite Pro Cinema 800 - 9 Cleaning and Replaci ng the Air Filter Clean the air filter on the bottom of the projector once every three months, or more often in dusty environments. If it’s not cleaned periodically, it can beco me clogged, preventing proper ventilation.
Epson PowerLite Pro Cinema 800 10 - Epson PowerLite Pro Cinem a 800 11/05 5. Loosen the two screws secu ring the lamp (they don’t come all the way out). 6. Grasp the lamp as shown and pull it straight out. Warning : The lamp(s) in this product contain mercury.
An important point after buying a device Epson 800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson 800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson 800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson 800 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson 800 will certainly help you make a decision on the purchase.
If you already are a holder of Epson 800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson 800.
However, one of the most important roles played by the user manual is to help in solving problems with Epson 800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson 800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
