Instruction/ maintenance manual of the product 2250 Epson
Go to page of 12
ActionPrinter 2250 Printer Specifications AC inlet FONT lights I l-l Light 1 Light 2 READY light J Font button LF/FF button Control panel output guide ribbon cart- Printing Printmg method: Printing sp.
ActionPrinter 2250 Continuous paper: Width Copies Thickness Weight 101 to 254 mm (4 to 10 inches) Three sheets (one original plus two copies) 0.065 to 0.
ActionPrinter 2250 PC 850 (Multilingual) PC 860 (Portuguese) - Interface specifications Your printer is equipped with an 8-bit parallel interface. Specifications and pin assignments The built-in paral.
ActionPrinter 2250 The Control Panel You can control basic printer operations - line feeding, form feeding, paper loading and ejecting, and font selection - with the buttons on the control panel.
ActionPrinter 2250 Running the Self Test Paper Handling You can run the self test with either continuous paper or single sheets; this section describes the easier way, with single sheets. 1. Make sure the printer is turned off. 2. While holding down the LF/FF (m) button, turn on the printer.
ActionPrinter 2250 l When you want to push the paper support back into the paper Using continuous paper with the push tractor cassette, first remove paper from the cassette. Then hold down the locking tab while pushing the paper support in. You can use the push tractor to print on continuous paper from 101 mm (4 inches) to 254 mm (10 inches) wide.
ActionPrinter 2250 Tips for using continuous paper . You can adjust the top-of-form position temporarily. Open the printer cover and turn the gear marked by + and - signs to adjust the position, This adjustment is lost when you turn off the printer or feed the paper backward to the paper-park position.
ActionPrinter 2250 2. Lower the paper-release lever to the single-sheet position. Envelopes You can use the manual insertion slot to print on individual envelopes.
ActionPrinter 2250 l The printer does not feed paper back to the paper-park position and then advance it to the top-of-form position between jobs even if paper is loaded when you turn on the printer.
ActionPrinter 2250 Table A: Language selection .- Language Light 1 Light 2 English OFF ON French OFF BLINK German ON OFF - Italian ON ON Spanish ON BUNK Once you press the LF/FF button, the printer prints the current default settings and the next instruction in the selected language After printing is finished, go to the next step.
ActionPrinter 2250 9. Turn off the printer to exit the default-setting mode. Any changes you have made remain in effect until you change them again. 10. After you exit the default-setting mode, slide the narrow cover back on the printer. Default settings This section describes all the features in the default-setting mode.
ActionPrinter 2250 Installation/Support Tips AP-2250 Beep Codes 2 Long & 2 Short Indicates the printer has completed its power-on initialization process and is ready to print. 1 Short 3 Short 5 Long The Escape code for “BEL” has been received.
An important point after buying a device Epson 2250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epson 2250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epson 2250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epson 2250 you will learn all the available features of the product, as well as information on its operation. The information that you get Epson 2250 will certainly help you make a decision on the purchase.
If you already are a holder of Epson 2250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epson 2250.
However, one of the most important roles played by the user manual is to help in solving problems with Epson 2250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epson 2250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
