Instruction/ maintenance manual of the product EPTL09605.0 Epic
Go to page of 30
USER'S MANUAL Model No. EPTL09605.0 Serial No. CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this man - ual for future reference. Write the serial number in the space above for future reference.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
20. When folding or moving the treadmill, make s ure that the storage latch is fully closed. 2 1. Inspect and properly tighten all parts of the treadmill every three months.
5 Congratulations for purchasing the EPIC TM 450 MX tre adm il l. The 450 MX treadmill offers an impressive array of features designed to make your workouts at h ome more effective and enjoyable. And when you’re n ot exercising, the treadmill can be folded away, taking less than half the floor space of conventional tread- mills.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not d ispose of the packing materials until assembly is completed. No te: The unde rsid e of the tre admi ll w alki ng b elt is coated with high-performance lubricant.
7 3. Insert a Wheel (93) into a Wheel Housing (43). Attach the Wheel with a Wheel Bolt (92) and a Nut (25). Note: Do not overtighten the Nut; the Wheel should turn freely . Tip the Uprights (99) forward slightly and insert the Wheel Housing (43) into the base of the Uprights as shown.
8 6. Make sure that all parts are properly tightened before you use the treadmill. Place a mat beneath the treadmill to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the TROUBLESHOOTING section on pages 22 and 23.
9 THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
10 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
1 1 H OW TO USE THE MANUAL MODE Insert the key into the console. See HOW TO TURN ON THE POWER on page 1 0. Select the manual mode. When the key is inserted, the manual mode will be selected. If you have selected a program, press the Manual button to reselect the manual mode.
12 The right display will also show your heart rate when you use the handgrip pulse sensor or the o ptional chest pulse sensor. In a dditi on, d uring heart rate programs the right display will show a.
13 H OW TO USE A PRESET PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 10. S elect a preset program. To select a preset program, press the Speed & Incline Programs button repeatedly. The right dis- play will show which program (P-1 to P-6) is se- lected.
14 To stop the program at any time, press the Stop button. The time will begin to fla sh in th e l ef t d is- p lay. To restart the program, press the Start bu tto n or the Speed increase bu tton.
15 H OW TO CREATE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 10. S elect a custom program. To select a custom program, press the Custom Programs button repeatedly until “P-9,” “P-10,” “P- 11,” or “P-12” appears in the right display.
16 H OW TO USE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 10. S elect a custom program. To select a custom program, press the Custom Programs button repeatedly until “P-9,” “P-10,” “P- 11,” or “P-12” appears in the right display.
17 H OW TO USE A HEART RATE PROGRAM Follow the steps below to use a heart rate program. Put on the chest pulse sensor. Note: You must wear the optional chest pulse sensor (see page 19) to use a heart rate pro- gram. While using the chest pulse sensor, do not use the handgrip pulse sensor.
18 Press the Start button or the Speed increase button to start the progr am. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and i ncline settings of the program. Hold the handrails and begin walking.
19 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of treadmill usage information. The information m ode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
20 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the frame down until it is past the pin on the latch knob. Then, slowly release the latch knob.
22 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
23 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged.
24 The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity.
25 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
26 NOTES.
27 P ART LIST—Model No. EPTL09605.0 R 1105A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Cover 2 54 3/4” Screw 3 1 Left Foot Rail 4 1 Left Handgrip, Top.
66 67 66 66 27 26 25 28 50 40 41 42 48 25 53 36 38 37 30 32 25 33 34 38 21 45 21 45 45 21 26 27 28 23 21 45 10 59 51 56 10 54 63 63 63 63 63 31 1 107 2 3 19 20 18 13 2 1 1 12 71 90 2 74 75 2 73 21 75 .
81 5 4 62 80 2 2 9 7 6 2 2 2 2 2 95 2 2 2 85 2 2 2 2 2 2 2 2 2 2 2 2 2 69 86 68 86 68 88 88 77 77 89 78 100 91 98 25 94 97 99 104 103 25 102 98 97 91 25 25 93 92 101 101 21 87 39 83 61 60 8 22 25 93 92 98 98 84 100 43 43 49 82 58 79 76 76 108 EXPLODED DRA WING—Model No.
Part No. 230795 R1105A Printed in USA © 2005 ICON IP, Inc. HOW T O ORDER REPLACEMENT P ARTS To order replacement parts, please see the front cover of this manual. To help us assist you, please be prepared to provide the following information: • the MODEL NUMBER of the product (EPTL09605.
An important point after buying a device Epic EPTL09605.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Epic EPTL09605.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Epic EPTL09605.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Epic EPTL09605.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Epic EPTL09605.0 will certainly help you make a decision on the purchase.
If you already are a holder of Epic EPTL09605.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Epic EPTL09605.0.
However, one of the most important roles played by the user manual is to help in solving problems with Epic EPTL09605.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Epic EPTL09605.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
