Instruction/ maintenance manual of the product H2062 Envision Peripherals
Go to page of 22
Table of Contents About This Guide .............................................................................................................................................. 1 National C onventi ons ................................................
1 A bout This Guide This guide describes the monitor's features, setup, and operation. information in this document is subject to change without notice. The sections are as follows: Safety Instructions: lists safety information. Setup: describes the initial setup process.
2 FCC Notice FCC Class B Radio Frequency Interference State ment WA RNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply w ith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3 HG Declaration SAFETY: Lamp Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LA W S.
4 Setup stand and bas e Please setup or remove the base following below steps. A djusting Viewing A ngle For optimal viewing it is recom mended to look at the full face of the monitor, and then adjust th e monitor's angle to your own preference.
5 Connecting Cab les Cable Connections On Back of Monitor and Computer 1. Power 2. Analog Turn off your computer before performing the procedure below .
6 Wall Mounting Preparing to Install an Optional W all Mounting Arm This monitor can be attached to a wall mounting arm which can be purchase d separately. Disconnect power before this procedure. Follow these steps: 1. Remove the stand & base. 2. Follow the manufacturer's instructions to assemble the wall mounting arm.
7 Setting Optima l Resolution The recommended resolution for this monitor is 1 600 by 900 . To setup the monitor to this re solution, follow the steps below. 1. Click START . 2. Click SETTINGS . 3. Click CONTROL PANEL . 4. Double click DISPLAY . 5. Click SETTINGS .
8 External Contro ls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure Below). By changing these settings, the picture quality can be adjusted to your personal preferences.
9 M enu Illustrat ion Press the MENU-button to activate the OSD window . Press< or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu functions.
10 Menu Icon De finition Luminance Adjust Range Description Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet.
11 Phase 0-100 Adjust Picture Phase to reduce Horizontal- Lin e noise H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture. Color Temp. W ar m 6500K Recall Warm Color Temperature from EEPROM.
12 Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast Position H. position Adjust Frame horizontal Position V.position Adjust Frame vertical Position Bright Frame on or off Disable or Enable Bright Frame OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.
13 Off Timer 0~24hrs Select timing to turn off the monitor. Information Show the information of the main image and sub-image source Reset Reset yes or no Reset the menu to default Exit Exit Exit the main OSD Notes: 1) If the product has only one signal input, the item of "Input S elect" is disable d.
14 LED Indicators Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red I-Menu soft ware W elcome to use “i - Menu” softw are by ENVISION.
15 Drives Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
16 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category 'Printers and Other Hardw are' 4. Click on the 'Display' Item. 5. Select the 'Settings' tab then click on the 'Advanced' button.
17 Technical Suppo rt Frequently Asked Questions Problem & Question Possible Solutions Power LED Is N ot ON Make sure the po wer button is ON and the Pow er Cord is properly connected to a gr ounded pow er outlet and to the mon itor.
18 Product Spec ifications LCD Panel Model name H 2062 Driving system TFT Color LCD Viewable I mage Size 508.5 mm diago nal Pixel pitch 0.2768 mm(H) x0. 2768 mm(V) Video R, G, B Analog interface Separate Syn c. H/V TTL Display Color 16.7M Colors Dot Clock 108 Mhz Resolution Horizontal scan ra nge 30 kHz - 80 kHz Horizontal scan S ize(M aximum) 442.
19 EPA ENERGY STA R ® ENERGY STAR® is a U.S. registered mark. As an ENERG Y STAR® Partner, ENVISION International (Europe) GmbH has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Preset Display Modes STAND RESOLUTION HORIZONTAL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) VGA 640×48 0 @6 0Hz 31.
20 Pin A ssignments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.
21 Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on t he level of DDC used, communicate additional information about its display capabilit ies.
An important point after buying a device Envision Peripherals H2062 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Envision Peripherals H2062 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Envision Peripherals H2062 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Envision Peripherals H2062 you will learn all the available features of the product, as well as information on its operation. The information that you get Envision Peripherals H2062 will certainly help you make a decision on the purchase.
If you already are a holder of Envision Peripherals H2062, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Envision Peripherals H2062.
However, one of the most important roles played by the user manual is to help in solving problems with Envision Peripherals H2062. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Envision Peripherals H2062 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
