Instruction/ maintenance manual of the product EN-7100s Envision
Go to page of 19
EN-7100s 1 v1_090802 AOC LM720 EN-7100s 17 inch TFT LCD Monitor User’s Man ual by Envision Peripherals , Inc. www .ENVISIONmonitor .com Before operating your mon itor , please read this manual thoroughly .
EN-7100s 2 v1_090802 EN-7100s For Y our Safety FCC St atemen t This equipm ent has been tes ted and foun d to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC C Rules. Thes e limits are designed to provide reasonab le protection against ha rmful interfer ence in a residential insta llation.
EN-7100s 3 v1_090802 EN-7100s Precautions • Do not use the monitor near water , e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an u nstable cart, stand, or t able. If the monitor falls, it can injure a person and cause ser ious damage to the appliance.
EN-7100s 4 v1_090802 EN-7100s For Y our Safety S pec i a l N o t es on LCD M on it ors The following symptoms are normal with an LCD monitor and do not ind icate a problem: • Due to the nature of the fluoresc ent light, the screen may flicker during initial use.
EN-7100s 5 v1_090802 EN-7100s Before Y ou Operate the Monitor Inst alling & Removing the Base General Features: • 17" (43.2cm) TFT Color L CD Monitor • Crisp, Clear Display for W indows .
EN-7100s 6 v1_090802 EN-7100s Before Y ou Operate the Monitor Connecting the Wires Using the Power Cord Supplied 1. Connect the bui lt-in video cable into the 15-pin connector on the back of your compute r and tighten the two screws. 2. Connect th e power cord into the power adap tor .
EN-7100s 7 v1_090802 EN-7100s Before Y ou Operate the Monitor Prep aring to Inst all An Optional W all Mounting Arm (Not supplied) This monitor can be att ached to a wall mounting arm you pu rchase s eparately . Disconnect power before this procedur e.
EN-7100s 8 v1_090802 EN-7100s Before Y ou Operate the Monitor Inst all An Optional W all Mounting Arm (Not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mou nting arm onto the back of the monitor . Line u p the holes of the arm with the holes in the back of the monitor .
EN-7100s 9 v1_090802 EN-7100s Before Y ou Operate the Monitor Adj us ti ng th e Vi ew i ng A ng l e For optimal viewing, adjust the monitor's angle to your own pr eference . • Hold the stand firmly when you change the monitor's angle. • Y ou can adjust the monitor' s angle from -5° to 25°.
EN-7100s 10 v1_090802 EN-7100s Operating Instructions Front Panel Buttons Auto : Press this button to automatically set the H-Position, V -Position, Clock and Focus settings. Power Indi cator : A green light indicates that the monitor is o n. An orange light indicates that the monitor is in Of f mode.
EN-7100s 11 v1_090802 EN-7100s Operating Instructions Adjusting the OSD Settings 1. Press the MENU button to open the OSD window . 2. Press the < or > buttons until the desired function is highlighted. 3. Press MENU to open the function’ s window .
EN-7100s 12 v1_090802 EN-7100s Operating Instructions DOS-mode This feature allo ws you to choose betw een resolution s of 720 x 400 or 6 40 x 400 wh ile working in DOS-mode. Follow the instructions for selecting functions in the OSD window as listed on the previou s page.
EN-7100s 13 v1_090802 EN-7100s T echnical Support (F AQ) Problem Possible Solution Power LED is not ON • Make sur e the powe r button is ON. • Make sure the power adaptor is properly connecte d to a grounded power outlet and to the monitor . No Plug & Play • Confirm that your compute r is Plug & Play compatible.
EN-7100s 14 v1_090802 EN-7100s T echnical Support (F AQ) 1 CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture’s width is incorrect.
EN-7100s 15 v1_090802 EN-7100s T echnical Support (F AQ) Resolution Chart Error Message Possible Solution Input not supported • Y our compute r has been set to an incomp atible display mode .
EN-7100s 16 v1_090802 EN-7100s Appendix S pecifications LCD Panel Driving system TFT Color LCD Size 17" (43.2 c m) Diagonal Pixel pitch 0.264 mm (H) x 0.264 m m (V) Viewab le angle 150° (H) 125° ( V) Input Response time 30 milliseconds Vi deo Red, Green, Blu e Analog Interface Separate Sync.
EN-7100s 17 v1_090802 EN-7100s Appendix S pecifications (continued) Front Panel Buttons Auto Brightness Contrast Power Switch MENU/ Exit External Controls: Function s Contrast Brightness Focus Clock H-Position V- P o s i t i o n Auto-Center Language Dos-mode Resolution Selected 6500° K 7800° K RGB Color temp.
EN-7100s 18 v1_090802 EN-7100s Appendix Factory Preset T iming T able St andard Resolution (in pixels) Horizont al Frequency V ertical Frequency DOS-Mode 600 x 400 31.47 kHz 70 Hz 720 x 400 3 1.47 kHz 70 Hz VGA 640 x 480 31.47 kHz 60 Hz 640 × 480 35.
EN-7100s 19 v1_090802 EN-7100s Appendix Connector Pin Assignment Pin Number Description Pin Number Description 1 Red 9 +5V 2 Green 10 Detect Cable 3B l u e 1 1 N C 4 Ground 12 DDC-Serial Data 5 Ground.
An important point after buying a device Envision EN-7100s (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Envision EN-7100s yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Envision EN-7100s - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Envision EN-7100s you will learn all the available features of the product, as well as information on its operation. The information that you get Envision EN-7100s will certainly help you make a decision on the purchase.
If you already are a holder of Envision EN-7100s, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Envision EN-7100s.
However, one of the most important roles played by the user manual is to help in solving problems with Envision EN-7100s. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Envision EN-7100s along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
