Instruction/ maintenance manual of the product CE2005 Enviro
Go to page of 15
PELLET ST OVE EF THERMO 28 PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET-BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH. Contact your building or fire officials about restrictions and installation inspection requirements in your area.
2 Introduction........................................................................................3 Important Safet y Data...............................................................3 W ater Specifications.......................................
3 Introduction I MPORTANT S AFETY D ATA : Please read this entire manual bef ore installation and use of this pellet fuel burning room heater . F ailure to follow these instructions could result in propert y damage, bodily injury or even death. CAUTION: DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM.
4 P ELLET Q UALITY : PELLET QUALITY IS IMPORTANT, PLEASE READ THE FOLLOWING PAGE. Y our pellet stove has been designed to burn wood pellets only . Since there are many manufacturers of wood pellets, it is important to select pellets that are fr ee of dirt or any impurities.
5 W ARNINGS AND R ECOMMENDATIONS : A. Do not abuse the glass by striking or slamming the door shut. B. Do not attempt to oper ate the stove with broken glass.
6 Introduction R ATING L ABEL L OCATION : The rating label is located on the hopper lid. A PPLIANCE D IMENSIONS : 37 3 / 8 " (94.9cm) 25 7 / 16 " (64.
T URNING P ELLET S TOVE O N : Ensure the hopper has sufficient pellet fuel to start the unit. 1. Set water temper ature, using the rotary dial located above the feed contr ols.
8 This is used to regulate the airflow through the pellet stove. • On the low heat output settings, push the slider all the way in. • On the high heat output pull the slider out or until a good fire is achieved. A good fire is in between a fire with lazy black tipped flames and a forced fire (very quick, shorter flames).
9 R outine Cleaning and Maintenance The following list of components should be inspected and maintained routinely to ensure that the appliance is operating at its’ optimum and giving y ou excellent .
10 DOOR GLASS Do not attempt to open the door and clean the glass while the unit is in oper ation or if glass is hot. T o clean the glass, use a soft cotton cloth and mild window cleaner , gas or wood sto ve glass cleaner , or tak e a damp paper towel and dip into the fly ash.
11 R outine Cleaning and Maintenance HEAT EXCHANGER AND INTERNAL EXHAUST TUBES: ONLY TO BE CLEANED WHEN THE UNIT IS COLD. Clean away any fly ash that may have collected in and on the tubes.
*NOTE: All troubleshooting procedures should be carried out by qualified technicians or installers. DO NOT: • Hold the ON / OFF BUT TON; this is a momentary contact switch and can be damaged if held down too long. • Service the stove with wet hands.
T roubleshooting 5. The stove will not shut off. « If the unit will not shut off , ensure that the thermostat (if equipped) is turned down below the room temperature (thermostat mode in the ON / OFF position). « If the unit is in the HI/LOW mode the unit will not shut off but will go to an idle setting (LOW).
14 W arr anty Sherwood Industries Ltd. gives a five year limited warrant y on all steel manufactured parts. A one-y ear warr anty is provided on all electrical components.
The following information must be r ecorded by the installer for warrant y purposes and future reference. NAME OF OWNER: _________________________________________ ADDRESS: ____________________________.
An important point after buying a device Enviro CE2005 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro CE2005 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro CE2005 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro CE2005 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro CE2005 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro CE2005, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro CE2005.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro CE2005. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro CE2005 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
