Instruction/ maintenance manual of the product 50-765 Enviro
Go to page of 15
50-765 PELLET ST OVE MERIDIAN SHERWOOD INDUSTRIES IS AN ENVIRONMENT ALL Y RESPONSIBLE COMP ANY . THIS MANUAL IS PRINTED ON RECYCLED P APER. PLEA SE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE O WNER ’S MANU AL Freestanding and Fireplace Insert PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET-BURNING ROOM HEATER.
T able of Contents Introduction........................................................................................... ..................3 Rating Label Location.....................................................................................3 P ellet Quality .
3 Introduction * This manual is designed for the home owner in conjunction with the technical manual. * R ATING L ABEL L OCATION : Freestanding: The r ating label is located on the inside of the hopper lid. Insert: The r ating label is located on the hopper cover .
4 Introduction I MPORTANT S AFETY D ATA : Please read this entire Owner’s Manual before installing or operating your ENVIRO Pellet Stove. Failure to follow these instructions may result in property damage, bodily injury or even death.
5 Introduction ASHES: Disposed ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal.
32 1 / 2 " (826mm) 24 7 / 8 " (632mm) 24 3 / 4 " (629mm) Specific a tions D IMENSIONS - F REESTANDING : Figure 1: Meridian Freestanding Dimensions. 23 3 / 4 " (604mm) 12 7 / 8 " (326mm) 22 7 / 8 " (583mm) 23 7 / 8 " (605mm) Figure 2: Meridian Fireplace Insert Dimensions.
7 Oper a ting Instructions C ONTROL B OARD F UNCTIONS : 1. AUGER TRIM: Used to change feed rates on LOW ONL Y for poorer quality fuels. Push the Auger T rim button until the number 1 and 5 lights appear on the Heat Level Indicator . This will incr ease the feed r ate to 4 seconds ON time Auger pulse.
Figure 4: Thermostat Switch in MANUAL poition. Figure 5: Thermostat Switch in HIGH/LOW poition. .
9 Figure 8: Efficient Flame. Oper a ting Instructions HEA T LEVEL and F ans wil l drop down to the LOW setting for 30 minutes. If the thermostat contacts close within the 30 min, the HEA T LEVEL will return to the previous MANUAL setting. If the thermostat contacts remain open the stove automatically begins its shutdown routine.
2-3 Days / Weekly Semi-annually or 2 T ons of Fuel Burn Pot and Liner Exhaust V ent Ash Pan Fresh air Intake T ube Inside Firebox Blower Mechanisms Door Glass Heat exchanger tubes Heat exchanger tubes.
FRESH AIR INTAKE (season) Inspect periodically to be sure that it is not clogged with any f oreign materials. EXHAUST VENT (season) This vent should be cleaned every y ear or after two (2) tons of pellets. W e recommend contacting your dealer for professional cleaning.
EXHAUST PASSAGES (season) Removal of the firebox backing for bi- annual cleaning (refer to Figure 10): • Open the door by lifting the handle, remove the burn pot and burn pot l iner . • Lubricate all screws with penetrating oil. • Remo ve the four (4) screws that hold the brick liner retainers in place.
W arr anty Sherwood Industries Ltd. is the manufacturer of the Enviro line of heating products. At Sherwood Industries, our commitment to the highest level of quality and customer service is the most important thing we do.
W arr anty 14 6. Some minor expansion, contraction, or mov ement of certain parts and resulting noise, is normal and not a defect and, therefore, is not covered under this Limited W arranty . 7 . Misuse includes over-firing. Over -firing this appliance can cause serious damage and will nullify the Limited Warr anty .
15 NAME OF OWNER: _________________________________________ ADDRESS: _________________________________________ _________________________________________ _________________________________________ PHONE.
An important point after buying a device Enviro 50-765 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 50-765 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 50-765 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 50-765 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 50-765 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 50-765, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 50-765.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 50-765. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 50-765 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
