Instruction/ maintenance manual of the product 50-1573 Enviro
Go to page of 13
PELLET ST OVE Ev olution PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET-BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH. Contact your building or fire officials about restrictions and installation inspection requirements in your area.
T able of Contents 2 Introduction............................................................................................ ..................3 Rating Label Location....................................................................................
3 Introduction * This manual is designed for the home owner in conjunction with the technical manual. * R ATING L ABEL L OCATION : The rating label is located on the inside of the ash pan co ver . P ELLET Q UALITY : Pellet quality is important, please read the following: Your Enviro pellet stove has been designed to burn 6mm dia wood pellets only.
4 Safety W arnings & R ecommend a tions Please read this entire Owner’s Manual before installing or operating your ENVIRO Pellet Stove. Failure to follow these instructions may result in property damage, bodily injury or even death.
5 Safety W arnings & R ecommend a tions ELECTRICAL: The use of a surge protected power bar is recommended. The unit must be grounded. The grounded electrical cord should be connected to a standard 220-240 volts (2.0-2.3 Amps), 50 hertz electrical outlet and also must be accessible.
6 Specific a tions D IMENSIONS & S PECIFICATIONS : IMPOR T ANT : When not installing the optional Hearth P ad on the unit, the minimum requirements for protection on combustibles floors are a width of 620mm (24”) & depth of 670mm (26”) under the unit.
7 Oper a ting Instructions C ONTROL B OARD F UNCTIONS : 1. AUGER TRIM: Used to change feed rates on LOW ONL Y for poorer quality fuels. Push the Auger T rim button until the number 1 and 5 lights appear on the Heat Level Indicator . This will increase the feed r ate to 4 seconds ON time Auger pulse.
O PERATING Y OUR P ELLET S TOVE : DO NOT OPERATE THE UNIT WITH THE DOOR OR ASH PAN OPEN. Keep hopper lid closed except during re-fuelling. CAUTION: When operating during adverse weather , such as high winds or freezing r ain, if the unit exhibits dramatic changes in combustion stop using the unit immediately .
9 active flame with no black tips then the air is set for proper operation, r efer to Figure 7 . The combustion exhaust blower is a v ariable speed blower controlled by the heat output button. This blower will decrease the vacuum pressure inside the stove and as the heat output button is turned down.
DOOR GLASS CLEANING (2-3 days) Cleaning of the glass must only be done when stove is cold. Open the door by lifting the handle. The glass can be cleaned by wiping down the outside and inside of the glass with a dry soft cloth.
11 R outine Cleaning and Maintenance If the glass has build up that can not be remov ed with only the cloth, clean the glass using paper towel and a gas appliance glass cleaner , this may be purchased through most dealers. If a gas appliance glass cleaner is not available, use a damp paper towel dipped in y ash to clean the glass.
R outine Cleaning and Maintenance EXHAUST VENT (annually) Check vent for blockage prior to lighting after a pr olonged shutdown period. This vent should be cleaned every year or after two tons of pel lets. W e recommend contacting your dealer for professional cleaning.
13 NAME OF OWNER: _________________________________________ ADDRESS: _________________________________________ _________________________________________ _________________________________________ PHONE.
An important point after buying a device Enviro 50-1573 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 50-1573 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 50-1573 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 50-1573 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 50-1573 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 50-1573, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 50-1573.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 50-1573. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 50-1573 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
