Instruction/ maintenance manual of the product 50-1385 Enviro
Go to page of 13
PLEA SE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE SHERWOOD INDUSTRIES IS AN ENVIRONMENT ALL Y RESPONSIBLE COMP ANY . THIS MANUAL IS PRINTED ON RECYCLED P APER. 50-1385 PELLET STOVE Empr ess O WNER ’S MANU AL PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET BURNING ROOM HEATER.
T able of Contents 2 Introduction........................................................................................................... ...3 Rating Label Location....................................................................................
3 Introduction * This manual is designed for the home owner in conjunction with the technical manual. * R ATING L ABEL L OCATION : The rating label is located on the hopper top behind the surr ound panel. P ELLET Q UALITY : Pellet quality is important, please read the following: Your enviro pellet stove has been designed to burn wood pellets only.
4 I MPORTANT S AFETY D ATA : Please read this entire Owner’s Manual before installing or operating your ENVIRO Pellet Stove. Failure to follow these instructions may result in property damage, bodily injury or even death.
5 ASHES: Disposed ashes should be placed in a metal container with a tight-fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal.
Oper a ting Instructions S LIDER /D AMPER S ETTING : This is used to regulate the airflow through the pellet stov e. THE SLIDER / DAMPER MUST BE SET AT TIME OF INSTALLATION.
C-10808 1. ON/OFF BUTTON: Used to turn the unit ON and OFF . 2. AUGER PULSE LIGHT: This light will flash in conjunction with the auger . 3. HEAT OUTPUT INDICATOR: Shows the present heat output setting. 4. HEAT LEVEL ADJUSTMENT: When pressed, will change the heat setting of the unit from low to high.
Oper a ting Instructions O PERATING Y OUR P ELLET S TOVE : PRE-BURN INSTRUCTIONS : The burn pot liner holes must be clear and the liner installed correctly against the ignitor tube with the lar ge v ertical lip at the front for proper operation. Check the hopper f or enough pellets to start the unit.
9 2-3 Days / Weekly Semi-annually or 2 T ons of Fuel Burn Pot and Liner Fresh Air Intake Door Latch Exhaust Passages Door Glass Exhaust V ent Ash pan and Door gaskets Blower Mechanisms Ash Pan Behind .
ASH PAN AND DOOR GASKETS (weekly) After extended use the gasketing may come loose. T o repair this, glue the gasketing on using high- temperature fiberglass gasket glue available from your local ENVIRO dealer . This is important to maintain an airtight assembly .
11 R outine Cleaning and Maintenance EXHAUST VENT (season) This vent should be cleaned every y ear or after two (2) tons of pellets. W e recommend contacting your dealer f or prof essional cleaning. T o clean the v ent pipe, run a chimney cleaning brush through the pipe.
W arr anty Sherwood Industries Ltd. gives a five year limited warrant y on all steel manuf actured parts. A one-year warr anty is pr ovided on all electrical components.
13 NAME OF OWNER: _________________________________________ ADDRESS: _________________________________________ _________________________________________ _________________________________________ PHONE.
An important point after buying a device Enviro 50-1385 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 50-1385 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 50-1385 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 50-1385 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 50-1385 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 50-1385, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 50-1385.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 50-1385. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 50-1385 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
