Instruction/ maintenance manual of the product 50-1266 Enviro
Go to page of 14
50-1266 PELLET ST OVE Empr ess SHERWOOD INDUSTRIES IS AN ENVIRONMENT ALL Y RESPONSIBLE COMP ANY . THIS MANUAL IS PRINTED ON RECYCLED P APER. PLEA SE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE O WNER ’S MANU AL PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET-BURNING ROOM HEATER.
2 T able of Contents Introduction............................................................................................................3 P ellet Quality ............................................................................................
3 Introduction * This manual is designed for the home owner in conjunction with the technical manual. * P ELLET Q UALITY : Pellet quality is important, please read the following: Your enviro pellet stove has been designed to burn wood pellets only. Do not use any other type of fuel, as this will void any warranties stated in this manual.
4 I MPORTANT S AFETY D ATA : P lease read this entire Owner’s Manual before installing or operating your ENVIRO Pellet Stove. Failure to follow these instructions may result in property damage, bodily injury or even death.
ASHES: Disposed ashes should be placed in a metal container with a tight -fitting lid. The closed container of ashes should be on a non-combustible floor on the ground, well away from all combustible materials pending final disposal.
6 Specific a tions D IMENSIONS : Figure 1: Empress Dimensions. 24 7 / 16 " (621mm) 27 3 / 8 " (695mm) 24 3 / 16 " (614mm) 15 3 / 8 " (390mm) 25 3 / 4 " (653mm) 15 3 / 4 " (400mm) R ATING L ABEL L OCATION : The rating label is located on the back of the hopper .
The easiest way to make sure that an efficient flame is achiev ed is to understand the characteristics of the fire. • A tall, lazy flame with dark orange tips requires more air – Open slider (pull out) slightly . • A short, brisk flame, like a blowtorch, has too much air – Close slider (push in) slightly .
Oper a ting Instructions C ONTROL B OARD F UNCTIONS : 1. AUGER TRIM: Used to change feed r ates on LOW ONL Y for poorer quality fuels. Push the Auger T rim button until the number 1 and 5 lights appear on the Heat Level Indicator . This will increase the feed rate to four (4) seconds ON time per Auger pulse.
9 Oper a ting Instructions O PERATING Y OUR P ELLET S TOVE : PRE-BURN INSTRUCTIONS : The burn pot liner holes must be clear and the liner installed correctly against the ignitor tube for proper oper ation. Check the hopper for enough pellets to start the unit.
2-3 Days / Weekly Semi-annually or 2 T ons of Fuel Burn Pot and Liner Exhaust V ent Ash Pan Fresh air Intake T ube Inside Firebox Blower Mechanisms Door Glass Heat exchanger tubes Heat exchanger tubes.
11 ASH PAN AND DOOR GASKETS (weekly) After extended use the gasketing may come loose. T o repair this, glue the gasketing on using high- temperature fiberglass gasket glue available from your local ENVIRO dealer . This is important to maintain an airtight assembly .
R outine Cleaning and Maintenance EXHAUST VENT (season) This vent should be cleaned every y ear or after two (2) tons of pellets. W e recommend contacting your dealer for professional cleaning. T o clean the vent pipe, tap lightly on the pipe to dislodge any loose ash.
13 W arr anty Sherwood Industries Ltd. gives a five year limited warrant y on all steel manufactur ed parts. A one- year warr anty is provided on all electrical components.
MANUF ACTURED BY : SHERWOOD INDUSTRIES L TD . 6782 OLDFIELD RD. S AANICHTON, BC, CANADA V8M 2A3 www .envirore.biz May 15, 2006 C-11112 NAME OF OWNER: _________________________________________ ADDRE.
An important point after buying a device Enviro 50-1266 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 50-1266 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 50-1266 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 50-1266 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 50-1266 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 50-1266, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 50-1266.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 50-1266. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 50-1266 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
