Instruction/ maintenance manual of the product 25BV Enviro
Go to page of 19
SHERWOOD INDUSTRIES IS AN ENVIRO NMENTALLY RESPONSIBLE COMPANY THIS MANUAL IS PRINTED ON RECYCLED PAPER ACCENT 2 5 BV By SHERWOOD INDUSTRIES LTD. OWNERS MANUAL WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
SAFETY PRECAUTIONS FOR SAFE INSTALLATION AND OPERAT ION OF YOUR "ENVIROGAS" HEATER, PLEASE, CAREFULLY READ THE FOLLOWING INFORMATION: • All "ENVIROGAS" gas-fired appliances must be installed in accordance with these instructions.
TABLE OF CONTENTS SECTION PAGE 1. Code Approvals 3 2. Dimensions and Clearances to Combustibles 5 3. Venting 6 4. Assembly and Installation Instructions 7 5. Electrical Requirements 8 6. Gas Line Connection and Testing 9 7. Installation of Log Sets and Embers and Brick Panels 10 8.
CODES AND APPROVALS CONTINUED RE: CONVERSION OF ZERO CLEARANCE FACTORY BUILT FIREPLACES The following instructions cover Sherwood Industries Ltd. policy for Gas-Fired Appliances (inserts) to be retofitted into existing factory built fireplaces with replacement parts removed.
2. DIMENSIONS AND CLEARANCES TO COMBUSTIBLES DISTANCE TO COMBUSTIBLES: Mantel pillar to surround panel 2" / 5.08 cm Floor to 8" wide mantel 40" / 101 cm Minimum non-combustible surface in front of unit 8" / 20.8 cm OTHER DIMENSIONS A.
3.VENTING FIREPLACE INSERTS WARNING: Operation of this heater when not connected to a properly installed and maintained venting system can result in carbon monoxide (CO) poisoning and possible death.
4. ASSEMBLY AND INSTALLATION INSTRUCTIONS ASSEMBLING AND INSTALLING YOUR ENVIROGAS ACCENT 25 1. Remove the unit from it’s box 2. Open the door, by first removing the cover with the nameplate attached (open valve door and pull nameplate cover side tab to release catch), undo the two bolts at the bottom of the door.
5. ELECTRICAL REQUIREMENTS The ACCENT 25 will operate without electrical pow er. This model has a Millivolt gas control w hich uses the pilot flame to generate enough electricity to oper ate the main burners.
6. GAS LINE CONNECTIONS and TESTING WARNING: Only persons licensed to w ork with gas piping may make the necessary gas connections to this appliance. GA S LINE CONNECTION • This stove is equipped with a 3/8 x 3 inch black iron nipple located on the right side of the unit terminating in a 3/8" male NPT fitting.
7. INSTALLATION OF LOGS, EMBERS and BRICK PANELS INSTA LLING THE GLOWING EMBERS and LOGSET A bag of ceramic fiber embers is provided for use on the burner PAN. CAUTION: Use only the type of ember material supplied with this appliance. Due to the irregular size of the ember material there may be more than required.
8.OPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE OPERATING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIO NS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE , PERSONAL INJURY OR LOSS OF LIFE. A) This appliance is equipped with a pilot, which must be lit by hand by following thes e instructions exactly.
9. ROUTINE MAINTENANCE and SERVICE Periodically check to ensure that your sy stem is clean. Periodically check the pilot and burner. Check to see that all the burner ports are clean and clear. Check the pilot head for blockage. Check to ensure the pilot flame is blue with y ellow tips.
10.FUEL CONVERSION “Warning” This conversion kit shall be installed by a qualified service technician in accordance with the manufacturer’s instructions and all applicable codes and requirements of the authority having jurisdiction.
11. TROUBLE SHOOTING Problem Possible Cause Solution Spark will not arc to the pilot after repeated pressing of spark ignitor Defective piezo ignitor Check connections to ignitor -If ignitor connectio.
15 12. PARTS AND ACCESSORIES Service Parts av ailable from your local Envirogas Dealer. PART # DESCRIPTION EG25-001 Convection Blower EG25-002 Heyco Strain Relief EG25-003 Fan Controller with Knob EG2.
PAINTED DOOR EG25-092 BLACK IRON NIPPLE EG25-062 LOUVER SET (TOP & BOTTOM) EG25-115 FULLY ASSEMBLED PILOT EC-015 NG EC-016 LP THERMOPILE EC-012 THERMOCOUPLE EC-009 SPARK ELECTRODE EC-011 ACCENT 25.
17 FPI WIRING HARNESS PART (A) EC-034 (NOT SHOWN) FAN CONTROLLER EC-039 ACCENT 25 REGULAR SURROUND WITH TRIM PAINTED TRIM 50-107 BRASS TRIM 50-011 NICKEL TRIM 50 - 012 BRASS TRIM CORNER BRACKETS EC053.
13. WARRANTY Sherwood Industries Ltd. offers a *Lifet ime Warranty on this gas product. The lifet ime warranty covers the appliance for a period of seven years from the date of installation.
14. INSTALLATION DATA SHEET The following information must be recorded by the inst aller for w arranty purposes and future reference. Envirogas Model: ACCENT 25 BV Name of Dealer: ____________________.
An important point after buying a device Enviro 25BV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 25BV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 25BV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 25BV you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 25BV will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 25BV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 25BV.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 25BV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 25BV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
