Instruction/ maintenance manual of the product 2100 Enviro
Go to page of 20
SHERWOOD INDUSTRIES IS AN ENVIRONMENT ALL Y RESPONSIBLE COMP ANY . THIS MANUAL IS PRINTED ON RECYCLED P APER. BY: SHERWOOD INDUSTRIES LTD O WNER ’S MANU AL PLEA SE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE W o o d S t o v e 2100 Freestanding PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS WOOD BURNING ROOM HEATER.
Safety Prec autions FOR SAFE INST ALLA TION AND OPERA TION OF Y OUR “ENVIRO” WOODST O VE, PLEASE CAREFULL Y READ THE FOLL OWING INFORMA TION: ● Please read this entire manual befor e you install and use your new heater . F ailure to follow these instructions may result in propert y damage, personal injury , and even death.
T able of Contents 3 Safety Precautions.........................................................................................................2 T able of Contents.......................................................................................
Oper a ting Instructions FIRST START When rst installed, the chimney , rebricks and steel are cold and i t usually takes sever al hours on a fairly high burn for them to become hot and dry enough for the stove to function well. The paint will smell a little for the rst time or two as it cures.
CHIMNEY OR RUN AWAY FIRE: 1. Call local re department (or dial 911) 2. Close the draft f ully 3. Examine ue pipes, chimney , attic, and roof of the house, to see if any part has become hot enough to catch re. If necessary spra y with re extinguisher or water f rom the garden hose.
6 Oper a ting Instructions 3. Refueling the Stove: Use a long pair of gloves (barbecue glov es) when feeding the re because these stoves burn at the front they are clean and efcient, but they are also very hot and gloves are useful.
7 Oper a ting Instructions 2. What type of wood is best to use as rewood? Both hardwood and softwood burn well in this stove. Both woods contain about 8,000 BTU/lb (18,570 KJ/Kg), but hardwood is gener ally denser , will weigh more per cord, and burns a little slower and longer .
Smok e path Dr y seasoned wood Primar y air window wash. Primar y air enter s at bottom, trav els up the side vertical risers and down the window . Bottom (primar y) air outlet. Single rod contr ols for both openings. Double layer of Claybur n. Insulated bric ks k eep a high temperatures below to bur n up smoke.
9 Specific a tions W OOD STOVE S PECIFICATIONS : Model 2100 Freestanding Width x Depth 24” x 30” (610 mm x 762 mm) Height with pedestal or legs 33” (838 mm) Height of body 22” (559 mm) Fire box size (depth x width x height) 21” x 18” x 12” (546 mm x 457 mm x 305 mm) Capacity 3.
Inst alla tion Please read and understand these instructions before installing pedestal or ash pan and leg option. F ailure to follow these instructions carefully could cause personal injury or property damage.All screws are pre installed on the base of the unit.
11 Inst alla tion C HIMNEY I NSTALLATION T HROUGH W ALL : Here are four methods of combustible wall chimney connector pass-throughs. This information was provided from NFPA 211. Method A . 12” (304.8 mm) Clearance to Combustible Wall Member: Using a minimum thickness 3.
Inst alla tion I NSTALLATION : A non-combustible oor protector is required under all freestanding units, ref er to “Clearances T o Combustibles - Freestanding” . When venting into a masonry chimney the oor protector must be installed directly below the chimney vent and 2” (50.
13 Inst alla tion O UTSIDE A IR : A 4” (10.2 cm) fresh air adapter kit is available. This adapter can be instal led either on the back pedestal or through the oor under the pedestal. Place the ” mesh screen between the fresh air adapter and the body of the pedestal (as shown to right).
Inst alla tion B RICK P LACEMENT : COMPLETE THE STOVE AND SMOKE PIPE INSTALLATION BEFORE PLACING THESE BRICKS. 1. Place the bottom lay ers of the sides and back of the rebox. 2. Place the oor bricks. The spaces between the bricks will soon ll with ashes.
15 Inst alla tion D OOR I NSTALLATION : Remo ve the door from the packaging. Inspect the door assembly for damage. DO NOT USE DOOR IF GLASS IS BROKEN. Place the door assembly on the two (2) hinge pins mounted on the body of the unit. Open and close the door , applying pressure down, to ensure the door assembly is properly seated on the hinges.
CAUTION Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. 1) Remov e the fan assembly from the box and inspect for any damage to the assembly .
17 P ar ts List Ref erence Number Description Part Number 1 120ºF (49ºC) Ceramic F an T emperature Sensor EC-001 Domestic Power Cord - 115V EC-042 2 Convection Blower - 115V EC-069 3 F an Controller With Knob - 115V EF-045 Door Gasket - 7 feet (2.
P ar ts Diagr am 18 .
19 W arr anty Because of our high standards Sherwood Industries Ltd. can offer a *Lifetime Warr anty on all it ’ s wood products. Covered under this warranty are Cabinet Sides, T ops, P edestals, Surround Panels, Remov able Air Channel, and Chassis.
20 Inst alla tion Da t a Sheet The following information must be recorded by the installer f or warr anty purposes and f uture ref erence. NAME OF OWNER: _________________________________________ ADDR.
An important point after buying a device Enviro 2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enviro 2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enviro 2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enviro 2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Enviro 2100 will certainly help you make a decision on the purchase.
If you already are a holder of Enviro 2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enviro 2100.
However, one of the most important roles played by the user manual is to help in solving problems with Enviro 2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enviro 2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
