Instruction/ maintenance manual of the product RPS14 ALLEN & HEATH
Go to page of 8
Linear Console Power Supply USER GUIDE Publication AP5716 RPS14.
2 RPS14 User Guide This product complies with the European El ectromagnetic Compatibility directives 89/336/EEC & 92/31/EEC and the European Low V oltage Directives 73/23/EEC & 93/68/EEC.
RPS14 User Guide 3 Important Safety Instructions WARNINGS - Read the following before proceeding : ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR Read instructions : Retain these safet y and operating instru ctions for future re ference. Adh ere to all warnings pri nted here and on the power suppl y unit.
4 RPS14 User Guide Important Mains plug wiring instructions. The power supply unit is supplied with a moulded mains pl ug fitted to the AC mains power lead.
RPS14 User Guide 5 Introduction This user guide presents a quick reference to the RPS14. We recomme nd that you read this fully before starting. Included is i nformation on inst alling, con necting and operating th e power supply unit along with panel dr awings and technic al specificat ion.
6 RPS14 User Guide Inst allation Free standing The RPS14 can be operated as a freesta nding unit for shelf or floor operati on. Ensure adequate air flow around the unit. It must not be covered i n any way. Al ways sta nd the unit on a fi rm flat surface well away from any soft furnishings or carpet.
RPS14 User Guide 7 Operating the RPS14 The RPS14 is internally wired to op erate from one of the follo wing standard settings: 100V, 120V, 220V, or 240V. The unit is shipped pre-wired for the country in which it is to be used. Check that the rear panel is mark ed to indicate the voltage that is correct fo r your territory.
8 RPS14 User Guide Replacing the mains fuse The AC mains fuse is located on the rear of the RPS14 unit ne xt to the AC mains connector. In the event of a mains surge or under-rated fuse value, the fuse will rupt ure. S witch off the power supply and remove the mains lead plug from the “MAINS INPUT ” socket on the rear of the unit.
An important point after buying a device ALLEN & HEATH RPS14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ALLEN & HEATH RPS14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ALLEN & HEATH RPS14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ALLEN & HEATH RPS14 you will learn all the available features of the product, as well as information on its operation. The information that you get ALLEN & HEATH RPS14 will certainly help you make a decision on the purchase.
If you already are a holder of ALLEN & HEATH RPS14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ALLEN & HEATH RPS14.
However, one of the most important roles played by the user manual is to help in solving problems with ALLEN & HEATH RPS14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ALLEN & HEATH RPS14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
