Instruction/ maintenance manual of the product C2RPS-POE Enterasys Networks
Go to page of 34
SecureS t ack C2 PoE Redundant Power Supply C2RPS-POE Inst allation Guide C2RPS-POE POWER 9033995-01 Caution: Do not use this product with Se cureS tack C2 non-PoE devices.
.
i Notice Enterasys Networks reserv es the right to make changes in specifica tions and other information contained in this document and its web site without prior notice.
ii Regulatory Compliance Information Federal Communications Commission (FCC) Notice This device com plies with Pa rt 15 of the FCC rules.
iii Electromagnetic Compatibility (EMC) This product complies with the follo wing: 47 CFR Par t s 2 and 15, CSA C108.8, 89/336/EEC, EN 55022, EN 61000 ‐ 3 ‐ 2, EN 61000 ‐ 3 ‐ 3, EN 55024, AS/NZS CISPR 22, VCCI V ‐ 3.
iv Declaration of Conformity Application of Co uncil Directiv e(s): 89/336/EEC 73/23/EEC Manufacturer’s Na me: Enterasys Networks, Inc. Manufacturer ’ s Address: 50 Minuteman Road Andover, MA 01810 USA European Representativ e Address: Enterasys Networks, Ltd.
v Enterasys Networks, Inc. Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCL OSED PRODUCT , CAREFULL Y READ THIS LICENSE AGREEMENT . This document is an agreement (“ Agreement”) betwee n the end user (“Y ou”) and Enterasys Network s, Inc.
vi 3. APPLICABLE LAW. This Agreem ent shall be interpreted and governed under the laws and in the state and federal cour ts of the Commonwealth of Massachusetts wit hout regard to its conflicts of laws prov isions.
vii 8. AUDIT RIGHTS. You here by acknowl edge that the inte llectual property rights associated with the Program are of critical value .
viii.
ix Contents About this Guide Using This Guide ............ ....................... ...................... ....................... ...................... ........ ................... xi Structure of This Guide ................ ....................... .
x Tables 1-1 Powered Device (PD) PoE Power Classification s ............ ....................... ....................... ........ 1-3 2-1 Contents of N-POE Chassis Carton ........ ...................... ....................... ........................
SecureStack C2 Installation Guide xi About this Guide This guide provides an ov erview , installati on and troubleshooting instruct ions, and specifications .
Using the SecureStack C2 Manual Set xii About this Guide Using the SecureS t ack C2 Manual Set Other manuals have been dev eloped for the SecureStack C2 PoE switch devices that can be connected to the C2RPS ‐ POE pow er supply for power redundancy .
Conventions Used in This Guide SecureStack C2 Installation Guide xiii Conventions Used in This Guide The following conventions are used in this guide: Note: Calls the reader ’s attention to any item of information that may be of special import ance.
Conventions Used in This Guide xiv About this Guide.
SecureStack C 2 Installation Guide 1-1 1 Introduction This chapter provides the following information: For information about... Refer to page.
C2RPS-POE Overview 1-2 Introduction C2RPS-POE Overview The purpose of the C2RPS ‐ POE is to provide pow er backup to an Enterasys SecureStack C2 Po E ‐ compliant stackable switch.
Power Classificati ons and Deployment SecureStack C 2 Installation Guide 1-3 The numb er of PDs that can be supported by the connected SecureStack Po E .
Getting Help 1-4 Introduction The SecureStack PoE switch has six of its P oE/data ports connected to PDs with the following Class ra.
SecureStack C2 Installation Guide 2-1 2 Installation This chapter provides the installation instructions to install all the components of a C2RPS ‐ POE. To correctly instal l the C2RPS ‐ POE, follow the order of information listed below .
Unpacking the C2RPS-POE 2-2 Installation Unp acking the C2RPS-POE To unpack the C2RPS ‐ POE, proceed as follows: 1. Open the box and remov e the packing material protecting the devices.
Installing the C2RPS-POE on a Flat Surface SecureStack C2 Installation Guide 2-3 Inst alling the Rubber Feet To install the rubber feet, refer to Figure 2 ‐ 1 and proceed as follows: 1.
Installing the C2RPS-POE on a Flat Surface 2-4 Installation Guidelines for Inst allation Locate the C2RPS ‐ POE within 152 cm (5 ft) of its power source and on a surface as shown in Figure 2 ‐ 2 .
Rack Mounting the C2RPS-POE SecureStack C2 Installation Guide 2-5 Rack Mounting the C2RPS-POE To install the switch in a 19 ‐ inch ra ck, you need: •T w o rackmount brackets and mounting screws (rackmount kit) shipped with the switch.
Rack Mounting the C2RPS-POE 2-6 Installation Att aching Bracket s and Inst alling in Rack Proceed as follows to install the switch into a 19 ‐ inch rack: 1.
Connecting C2RPS-POE Cable and AC Power Cord SecureStack C2 Installation Guide 2-7 Connecting C2RPS-POE Cable and AC Power Co rd The C2RPS ‐ POE is connected to the SecureStack PoE switch using a C2R PS ‐ POE cable, as follows: 1.
Connecting C2RPS-POE Cable and AC Power Cord 2-8 Installation If you need additi onal help, contact Enterasys Networks. Refer to “ Getting Help ” on page 1 ‐ 4 for instructions.
Connecting C2RPS-POE Cable and AC Power Cord SecureStack C2 Installation Guide 2-9 Figure 2-7 C2RPS-POE Cable and AC Power Cord Connections If you need additi onal help, contact Enterasys Networks. Refer to “ Getting Help ” on page 1 ‐ 4 for instructions.
Connecting C2RPS-POE Cable and AC Power Cord 2-10 Installation.
SecureStack C2 Installation Guide A-1 A Specifications This appendix provides information about the foll owing: Enterasys Netw orks reserves the right to change the specifications at any time without notice.
C2RPS-POE Redundant Power Supply Output Connector A-2 Specifications C2RPS-POE Redundant Power Supply Output Connector For pin location and function, refer to Figu re A ‐ 1 and Ta b l e A ‐ 2 , respectively .
Compliance Standards SecureStack C2 Installation Guide A-3 Compliance S t andards The C2RPS ‐ POE meets the safety and electromagnetic compatibility (EMC) require.
Compliance Standards A-4 Specifications.
An important point after buying a device Enterasys Networks C2RPS-POE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enterasys Networks C2RPS-POE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enterasys Networks C2RPS-POE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enterasys Networks C2RPS-POE you will learn all the available features of the product, as well as information on its operation. The information that you get Enterasys Networks C2RPS-POE will certainly help you make a decision on the purchase.
If you already are a holder of Enterasys Networks C2RPS-POE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enterasys Networks C2RPS-POE.
However, one of the most important roles played by the user manual is to help in solving problems with Enterasys Networks C2RPS-POE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enterasys Networks C2RPS-POE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
