Instruction/ maintenance manual of the product dLive S5000 Allen & Heath
Go to page of 20
Surface Getting Started Guide S3000, S5 000, S7000 Before starting please check www.allen-heath.com for the latest dLive firmware and documentation.
Surface Getting Started Guide 2 AP 9899 Issue 1 dLive products comply with t he European Electromagnetic Compatibility directive 2004/108/EC and the European Low V oltage di rective 2006/95/EC.
Surface Getting Started Guide 3 AP 9899 Issue 1 IMPORT ANT - Read b efore starting Safety instructions Before starting, read the Important Safety Instructions printed on the sheet supplied with the equipment.
Surface Getting Started Guide 4 AP 9899 Issue 1 P acked items Check you have received the following: dLive Surface Getting Started Guide AP9899 Safety Sheet IEC mains lead Dust cover Contents IMPORTANT - Read before starting ......
Surface Getting Started Guide 5 AP 9899 Issue 1 1. Introduction dLive is a distributed digi tal mixing system providing a uniquely flexible solution for any live sou nd application.
Surface Getting Started Guide 6 AP 9899 Issue 1 S3000 20 faders, 6 layers = 120 strips Single screen S5000 28 faders, 6 layers = 168 strips Twin screen S7000 36 faders, 6 layers = 216 strips Twin scre.
Surface Getting Started Guide 7 AP 9899 Issue 1 2. Rear P anel Mic/Line inputs – 8x recallable preamps for balanced or unbalan ced microphone and lin e level signals.
Surface Getting Started Guide 8 AP 9899 Issue 1 Kensington Lock - A slo t for fitting st andard Kensington anti-theft security devices. Power Supply – Hot swappable power supply wi th mains IEC socket and On/Off rocker switch . To rem ove or replace, loosen the 4 screws indicated bel ow and slide the PSU out of the slot.
Surface Getting Started Guide 9 AP 9899 Issue 1 DX links – Dual redundant EtherCon port for connection of a DX exp ander over Fast Ethernet (IEEE 802.3 Layer 2 compliant). A single Cat5e (or higher) cable carries 32x32 channels of 96kHz audio and control.
Surface Getting Started Guide 10 AP 9899 Issue 1 3. Front P anel Channel Processing – Press a fader strip Sel key to access the processing for the input or mix channel a ssigned to it.
Surface Getting Started Guide 11 AP 9899 Issue 1 SoftKeys – 26 u ser assignable keys. Assign functions using the Surface / Control / SoftKeys screen. Talkback – Press to Talk latching or momentary ke y and Talk Active indicator. Hold down Assign and press any master Mix key to assign.
Surface Getting Started Guide 12 AP 9899 Issue 1 Fader Strips – Provide control o f Input channels, FX returns, Mix masters, DCAs, engineer’s Wedge / IEM monitor, or MIDI. Read the Fader Strip paragraph below for further information. The strip layout is user assignable and stored in Scenes.
Surface Getting Started Guide 13 AP 9899 Issue 1 Preamp – Peak indicator and dedicated preamp controls for analogue Gain, Digital Trim, 48V, Pad and polarity. Filters – HPF and LPF Frequency and In switch. Inser t – Insert In swi tch and Assigned indicator.
Surface Getting Started Guide 14 AP 9899 Issue 1 Left widget area – Can be configured for different functions, for example as a scrollable Scenes list. Hold down Setup and touch this area to configure. On the S3000 this area is dedicated to the channel processing.
Surface Getting Started Guide 15 AP 9899 Issue 1 Aux PRE NAM E IP St DCA 3.3 Fader strip Meter – 22 -segment signal meter and 6 -segment gain reduction meter. The meter displays audio signal activity for the channel. The red peak ind icator lights to warn that the signal is within 5dB of clipping.
Surface Getting Started Guide 16 AP 9899 Issue 1 3.4 Working with the Mix Press a Main Mix master strip Mix key. This is the normal mixing mode. The Input strips present the channel faders. The Master strips present the master mix faders. Hold down the Assign key and press channel Mix keys to assign or unassign them from the main mix.
Surface Getting Started Guide 17 AP 9899 Issue 1 4. Connect and po wer up 4.1 MixRack connection Plug a touring g rade C AT5e (or hi gher spec ification) c able u p to 100m long between the dLive Surface and MixRack gigaACE ports. Use two cables for redundancy.
Surface Getting Started Guide 18 AP 9899 Issue 1 4.4 Connect a laptop or wireless router Connect a laptop, router o r ac cess point to e i ther of the Network ports to use w ith dLive E ditor or iOS apps. Read the Release Notes and Help Files accompanying the software or apps for further inf ormation.
Surface Getting Started Guide 19 AP 9899 Issue 1 5. Dimensions C S3000 - 624.5mm/24.6" S5000 - 870mm/34.3" S7000 - 1080mm/42.5" 113.1mm/4.5" 352.9mm/13.9" A S3000 - 870mm/34.2" S5000 - 1115.4mm/43.9" S7000 - 1325.4mm/52.
Surface Getting Started Guide 20 AP 9899 Issue 1 6. T echnical specs Inputs System Mic/Line XLR In puts Balanced XLR, +48V phantom power Measured balanced XLR in to XLR out, 20-20kHz, minimum Gai n, P.
An important point after buying a device Allen & Heath dLive S5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allen & Heath dLive S5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allen & Heath dLive S5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allen & Heath dLive S5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Allen & Heath dLive S5000 will certainly help you make a decision on the purchase.
If you already are a holder of Allen & Heath dLive S5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allen & Heath dLive S5000.
However, one of the most important roles played by the user manual is to help in solving problems with Allen & Heath dLive S5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allen & Heath dLive S5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
