Instruction/ maintenance manual of the product dLive DX32 Allen & Heath
Go to page of 12
DX Expander G etting Started Guide DX32 Before starting please check www.allen-heath.com for the latest dLive firmware and documentation. AP 10242.
DX Expander Getting Started Guide 2 AP 10242 Issue 1 dLive products comply with t he European Electromagnetic Compatibility directive 2004/108/EC and the European Low V oltage directive 2006/95/EC.
DX Expander Getting Started Guide 3 AP 10242 Issue 1 IMPORT ANT - Read b efore starting Safety instructions Before starting, read the Important Safety Instructions printed on the sheet supplied with the equipment.
DX Expander Getting Started Guide 4 AP 10242 Issue 1 P acked items Check you have received the following: DX 32 expander Getting Started Guide AP 10242 Safety Sheet IEC mains lead 4x M6 screws and washers for rack mounting Contents IMPORTANT - Read before starting .
DX Expander Getting Started Guide 5 AP 10242 Issue 1 1. Introduction dLive is a distributed digital mixing system providing a uniquely flexible solution for any live sou nd application.
DX Expander Getting Started Guide 6 AP 10242 Issue 1 2. Installing the Ex pander 2.1 Free standing The Expander can be operated as a freestanding unit for shelf or floor use. It can be operated horizontally with the c onnectors facing upward or sideward.
DX Expander Getting Started Guide 7 AP 10242 Issue 1 3. Front P anel I/O modules – 4x slots for fitting 8ch analogue or digital I/O modules. To fit a module, switch the expander off, remove the bl a.
DX Expander Getting Started Guide 8 AP 10242 Issue 1 4. Rear P anel Plastic feet – Remova ble plastic feet. Use a flat-head screwdriver to remove or reposition the plastic feet. Kensington Lock - A slo t for fitting standard Kensington anti-theft sec urity devices.
DX Expander Getting Started Guide 9 AP 10242 Issue 1 5. I/O Modules M-AIN - Recalla ble preamps for balanced or unbalanced microphone and line level signals. Gain, Pad and 48V are digitally co ntrolled wit hin the preamp. The PP indicator l ights up whe n p hantom power volta ge is detected at the socket, whether internally or externally sourced.
DX Expander Getting Started Guide 10 AP 10242 Issue 1 6. Connect and po wer up 6.1 MixRack connection Plug a touring grade CAT5e (or hi gher specification) ca ble up to 100m long between t he DX Expander and Mi xRack DX ports. Use two cables for redundancy if required.
DX Expander Getting Started Guide 11 AP 10242 Issue 1 7. Dimensions 481.60 433.00 311.00 289.00 24.30 465.10 101.60 177.00.
DX Expander Getting Started Guide 12 AP 10242 Issue 1 8. T echnical specs Inputs System Mic/Line XLR In puts Balanced XLR, +48V phantom po wer Sampling Rate 96kHz +/- 20 PPM Mic/Line Preamp Fully reca.
An important point after buying a device Allen & Heath dLive DX32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Allen & Heath dLive DX32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Allen & Heath dLive DX32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Allen & Heath dLive DX32 you will learn all the available features of the product, as well as information on its operation. The information that you get Allen & Heath dLive DX32 will certainly help you make a decision on the purchase.
If you already are a holder of Allen & Heath dLive DX32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Allen & Heath dLive DX32.
However, one of the most important roles played by the user manual is to help in solving problems with Allen & Heath dLive DX32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Allen & Heath dLive DX32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
