Instruction/ maintenance manual of the product EVR100 EnGenius Technologies
Go to page of 135
Wireless Gigabit VPN Router E VR100 Wireless G igab it VPN Ro uter V1.0.
1 1. Introduct ion ........................................................................................................................................... .................................................................6 1.1. Package Contents ...
2 7. Internet .................................................................................................................................................................................................................. 46 7.1. St atus...........
3 9.5. MAC Filte r .......................................................................................................................................... ..................................................... 79 9.6. IP Filte r ....................
4 12.2. T ime.................................................................................................................................................................................................... 125 12.3. Dynamic DNS (DDNS) ....... ....
5 Revision History Version Date Notes 1.0 2011/01/11 First Release.
6 1. Introduction 1.1. Package Contents • EnGenius WIRELESS GI GABIT VPN ROUTER • AC Adapter • RJ-45 Ethernet LAN Cable • CD-ROM with Us er Manual and Setup Wizard • Quick Guide 1.
7 1.3. Introduction EVR100 is a 2T 2R Wireless 11N Gigabit VP N Router that delivers up to 6x f aster speeds and 3x extended coverage than 802.11g devices. EVR100 supports home network wi th superior throughput and perf ormance and unparallele d wireless range.
8 1.4. LED Overview LED Lights Icon Description Wireless LAN Color – Blue Lights w hen Wirele ss signal i s activated . Blinks when Wireless dat a transfer . Internet Color – Blue Blinks when WPS hands hake i s initiali zed. LAN Color – Blue Lights w hen wire d network devic e is con nected t o RJ-45 port.
9 2. Before you B egin This section wi ll guide you through the installation proces s. Place ment of the EVR100 is very important to avoid poor signal recepti on and performance. Avoid placing the device in encl osed spaces such as a closet, cabinet or wardrobe.
10 2.2. Computer Settings (Windows XP /Windows Vista/Windows 7) Click Start button and open C ontrol Panel. Windows XP Wi ndows Vista Windows 7.
11 Windows XP, c lick [Network Connection] Windows Vista, cl ick [View Network Status and Tasks] then [Manage Network Connections] Windows 7, cl ick [Vi.
12 Right click on [Local Area Connection] and sele ct [Properties ]. Check “Client for Mic rosoft Networks”, “File and Printer Sharing for Microsoft Netw orks”, and “Internet Protocol (TCP/IP) is ticke d. If not, please install them.
13 Select “Internet Protocol (T CP/IP)” and click [Properties] Select “Obtain an IP Addres s automatically ” and “Obtain DNS server address automaticall y” then click [O K].
14 2.3. Hardware Installation 1. Place the unit in an appropriate location after conducting a site survey. 2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook. 3. Plug one end of another Ethernet cabl e to WAN port of the device and the other e nd into you cable/DS L modem (Internet) 4.
15 3. Configuring your Rout er This section wi ll show you how to configure the de vice using the web-based configuration interfac e. Please use your wire less network adapter to connect the WIRELESS RO UTER.
16 4. Setup Wizard 1. Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.0.1 Note: If you have changed the default LAN IP Addr ess of the WIRELESS ROUTER, ensure you enter the correct IP Addre ss . 2. The default use rname and password are admin .
17 3. You will see the f ollowing webpage if login s uccessfully..
18 4. Click Wizard to enter the Se tup Wizard. Then click N ext to begin the wizard..
19 5. Select the Operation Mode. Please ensure y ou have the proper cables c onnected as de scribed in the Hardware Install ation section..
20 AP Router M ode a) The device will se arch for the correct Internet settings automaticall y. b) The most appropriate W AN type w ill be determined and s elected automatically. If i t is incorrect, ple ase select Others to set up the WAN setti ngs manually.
21 c) There are m any WAN service types available. Please obtain the correct settings from your Internet Service Provide r (ISP). Static IP Address If y our ISP Provider has assigned y ou a fixed IP a.
22 Dynamic IP Address The IP Add ress is all ocated autom atically. How ever some ISP’s w ill also recognize th e MAC ad dress an d will reject conne ctions if the MAC add ress d oes not match.
23 PPP over Eth ernet ISP requires an account u sername and pass word. PPP over Ethe rnet Username Username assig ned to you by the ISP Password Password for t his usern ame . Service You can assign a name for this service. (Optional) MTU The maximum size of p ac kets.
24 Point-to-Point Tun neling Protocol (PPTP ) PPTP is use d by some ISPs..
25 PPTP WAN I nterface Settings WAN Interf ace Typ e Select w hether th e ISP is set to Static IP or Dynami c I P address. Hostname This is opt ional. Only re quired if speci fied by ISP MAC address The MAC addre ss that is used to connect to the I SP.
26 Layer-2 Tunnel ing Protocol (L2TP) L2TP is used by some ISPs..
27 L2TP WAN In terface Settings WAN Interf ace Typ e Select w hether th e ISP is set to Static IP or Dynami c I P address. Hostname This is opt ional. Only re quired if speci fied by ISP MAC address The MAC addre ss that is used to connect to the I SP.
28 d) Setup the leve l of wireless security to be us ed. EnGenius recommends the Highest level of sec urity to be use d. Note: 802.11n wireless spe eds may not be achievabl e if the security level is se tting the Lowest or Low. SSID Ent er the name of your wi reless netw ork.
29 e) Check the se ttings are correct, and then click R eboot to apply the settings..
30 5. VPN Wizard Using VPN Wi zard, you can establish VPN c onnection easily. Pleas e refer to 11.3 ..
31 6. System 6.1. Status This page will dis play status of the devi ce. Status Model Description of this devic e. Mode The devic e is cu rrently in w hich mod e. Uptime The duration abou t the devi ce has bee n operating wi thout powe ring down or reboot.
32 WAN Setti ngs Attain IP P rotocol Method used t o conn ect to th e Interne t IP address The WAN I P Address o f the dev ice. Subnet Mask The WAN Subn et Mas k of the device. MAC address The MAC addre ss of the devi ce’s WAN Interface. Primary and Seconda ry DNS Primary and Sec ondar y DNS servers assign ed to th e WAN c onnecti on.
33 LAN Settings IP address The LAN I P Address of t he de vice. Subnet Mask The LAN Sub net Mask o f th e device . DHCP Serv er Whether the DHCP serv er i s Enabled or Disabled.
34 WLAN Set tings Channel The wirel ess channe l in use. ESSID The SSID (Network Name) of th e wirele ss networ k. (up to 4 SSI Ds are supp orted) Security Wireless enc ryption is en abled for this SSI D. BSSID The MAC addre ss of thi s SSID. Associated Cl ients The number of wireles s client s connec ted to thi s SSID.
35 6.2. LAN This page allows you to modify the de vice’s LAN settings..
36 LAN IP IP address The LAN I P Address of t his d evice. IP Subnet M ask The LAN Sub net Mask o f th is devic e. 802.1d Sp anning Tre e When Enabled, t he Span ning T ree protocol will prevent ne twork loops i n y our LAN net work.
37 DHCP Serv er DHCP Serv er The DHCP Ser ver autom atic ally allocates IP addres ses to your LA N de vice. Lease Time The duration of the DHCP server al locates e ach I P address to a LAN d evice. Start / End I P The range of I P addresse s of the DHCP server will a llocate to LAN devi ce.
38 Two DNS servers can be assigned for us e by your LAN device. There are f our modes available. DNS Servers From ISP The DNS serv er IP addr ess i s assigned from your I SP. User-Defin ed The DNS server IP addr es s is assigne d manually . DNS Relay LAN cli ents are assig ned the d evice’s I P address as the DNS se rver.
39 6.3. DHCP This page shows the status of the DHCP server and als o allows you to control how the IP address es are allocated..
40 The DHCP Cl ient Table shows the LAN clients that have bee n allocated an IP addre ss from the DHCP Se rver . DHCP Client T able IP address The LAN I P address of th e cl ient. MAC address The MAC addre ss of the cl ient’s LA N interface. Expiration Time The time that the all ocated I P address wil l expire .
41 You can also manually specify the IP address that will be allocated to a LAN client by associating the IP addres s with its MAC address. Type the IP address you would like to m anually assign to a specific MAC address and cl ick Add to add the conditi on to the Static DHCP T able.
42 6.4. Schedule This page allows you to setup the sc hedule times that the Firew all and Power Saving features will be activated / deactivated. Click Add to create a Schedule entry.
43 Schedule Schedule Desc riptio n Assign a nam e to the sc hed ule. Service The servic e provides for the s chedule. Days Define the Days to acti vate or deactivate the sche dule. Time of d ay Define the Tim e of d ay to acti vate or deac tivated the sc hedule.
44 6.5. Log This page displays the system log of the device. When powered down or rebooted, the log wil l be cleared. Log Save Save the log to a file. Clear Clear the log .
45 6.6. Language This page allows you to change the Language of the User Interface..
46 7. Internet The Internet sec tion allows you to manually set the WAN ty pe connection and its related settings. 7.1. Status This page shows the current status of the de vice’s WAN c onnection.
47 7.2. Dynamic IP Address The IP Address is allocated automatically. However some ISP’s will also recognize the MAC address and wi ll reject connections if the MAC address does not matc h.
48 Dynamic I P Address Hostname This is opt ional. Only re quired if speci fied by ISP MAC address The MAC Ad dress that i s used to connec t to the ISP. DNS Servers Two DNS se rvers can be assign ed for use b y your LAN d evices. There are tw o modes av ail able.
49 7.3. Static IP Address If your ISP P rovider has assigned you a fixed IP address, enter the assigned IP address, Subnet mask , Default Gateway IP address, and Primary DNS and Sec ondary DNS (if availa ble) of your I SP provider . Static IP Addr ess IP address Assign an I P address Ma nually.
50 7.4. PPP over Ethernet ISP requires an account u sername and pass word..
51 PPP over Ethe rnet ( PPPoE) Username Username assig ned to you by the ISP Password Password for t his usern ame . Service You can assign a name for this service. (Optional) MTU The maximum size of p ac kets. Do not change u nless ment ioned by the ISP.
52 7.5. Point-to-Point Tunneling Protocol (PPTP) PPTP is use d by some ISPs..
53 Point-to-Poi nt Tun neling Proto col (PPT P) WAN Interf ace Typ e Select w hether th e ISP is set to Static IP or wil l allocate Dynamic IP address. Hostname This is opt ional. Only re quired if speci fied by ISP MAC address The MAC Ad dress that i s used to connec t to the ISP.
54 7.6. Layer-2 Tunneling Protocol (L2TP) L2TP is used by some ISPs..
55 Layer-2 Tu nneling Protocol (L2TP) WAN Interf ace Typ e Select w hether th e ISP is set to Static IP or wil l allocate Dynamic IP address. Hostname This is opt ional. Only re quired if speci fied by ISP MAC address The MAC Ad dress that i s used to connec t to the ISP.
56 8. Wireless The Wireless se ction allows you to configure the Wireless settings. 8.1. Basic This page shows the current status of the de vice’s Wire less settings.
57 Basic Radio Enable or Disab le the de vice ’s wirele ss signal. Mode Select betw een Acc ess Point or W ireless Distri butio n System (WD S) mode s. Band Select th e types of wi reless cl ients that t he devic e will ac cept. eg: 2.4 GHz (B+G+N ) Only 802.
58 Wireless Dis tribution System (WDS) Using WDS to connect Access Point wireless ly, and in doing so extend a wire d infrastructure to locations where cabling is not possible or i nefficient to implement. Note that compatibility between diffe rent brands and models is not guaranteed.
59 8.2. Advanced This page allows you to configure wirele ss advance settings. It is recommended the def ault settings are used unless the user has expe rience with these functions.
60 Advanced Fragment Th reshol d Specifies t he size of the packet per fragm ent. This function c an reduce the chanc e of packet collision . However w hen this value is se t too low, there wil l be increase d overheads r esulti ng in poor performanc e.
61 8.3. Security This page allows you to set the wireless s ecurity settings. Security SSID Selectio n Select the SSID t hat the s ecurity se ttings w ill apply t o. Broadcast SSID If Disabled, th en the dev ice will not be broadc asting the SSID. There fore it will be invisi ble to wireless clients.
62 Encryption The encrypti on method t o be ap plied. You can choos e from W EP, W PA pre-sh ared key o r WPA RA DIUS. • Disabled - no data encrypti on is used. • WEP - dat a is encr ypted usi ng the WE P standard . • WPA-PSK - data is encrypt ed using t he WPA-PSK standard.
63 802.1x Auth enticatio n RADIUS Se rver IP Address The IP Add ress of the RA DIUS Se rver RADIUS Se rver por t The port num ber of the RADIUS Se rver.
64 WEP En cryption: WEP Encryp tion Authenticatio n Type P lease ensur e that y our w ireless c lients use the same authent ication t ype. Key type ASCII : regular t ext (rec omm ended) HEX : for advanc ed user s Key Length Select th e desired option, and en sure the w ireless clie nts use the same setti ng.
65 WPA Pre-Shared Key En cryption: WPA Pre-Sha red Ke y Encryptio n Authenticatio n Type Please ensur e that you r wi reless cl ients use the same authenti cation ty pe. WPA type Select th e WPA encrypti on you w ould like. Please ensur e that you r wi reless cl ients use the same settin gs.
66 WPA RA DIUS Encryption: WPA RADI US Encryptio n WPA type Select th e WPA encrypti on you w ould like. Please ensur e that you r wi reless cl ients use the same settin gs. RADIUS Se rver IP address Enter the IP add ress of t he RA DIUS Server RADIUS Se rver Port Enter t he port num ber us ed for c onnection s to the RADIUS server.
67 8.4. Filter This page allows you to create fil ters to control which wire less clients can connect to this device by only al lowing the MAC addresses entere d into the Filtering Table.
68 Wireless Fil ter Enable Wirel ess Acc ess Control Tick the box to Enable W ireless Acce ss Control. When Enable d, only wire less c lients on the Filt ering Tabl e will be allowe d. Description Enter a nam e or descri ption for thi s entr y. MAC address Enter the MA C address o f the w ireless c lient th at you wish to all ow connec tion.
69 8.5. Wi-Fi Protected Setup (WPS) WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi netw orks in the home and small office environment.
70 Wi-Fi Prot ected Setup (WPS) WPS Tick to Enable the W PS feature. WPS Butto n Tick to Enable the W PS push bu tton. Wi-Fi Prot ected Setup Inform ation WPS Curren t Status Shows whet her the W PS func tion is C onfigured o r Un-co nfigured .
71 Initializin g WPS Feature There are tw o methods to initialize the W PS feature: Push Button and Pin code m ethods. 1. WPS Push Button Method Push the WPS button on the WIRELESS ROUT ER device. T he Wireless LED light will s tart to flash to indicate that the W PS process is ready .
72 2. Pin Code Method Note the Pin code of your WIRELESS ROUT ER device. Please use this Pin code to initialize the WPS process from the wireless c lient configuration utility. This process w ill be different for each brand or model. Pl ease consult the user manual of the wirel ess client for more information.
73 8.6. Client List This page shows the wireless clients that are connected to the WIRELESS ROUTER device ..
74 8.7. Policy This page allows you to configure the acces s policies for each SS ID (wireless netw ork). Policy WAN Con nection Allow wireless clients on thi s SSID to acc ess the W AN port which typically is an Internet c onnecti on.
75 9. Firewall The Firewall secti on allows you to set the acces s control and Firewall s ettings. 9.1. Enable This page allows you to Enable / Disable the Firew all features. If Enabled Firewall service, the De nial of Service (DoS) and SPI (Stateful Packet Inspection) features will als o be enabled.
76 9.2. Advanced You can choose whether to allow VPN (Virtual Privat e Network) packets to pass through the Fire wall..
77 9.3. DMZ If enabled this fe ature, allows the DMZ computer on your LAN to be expose d to all users on the Internet. • This allows al most any application to be used on the s erver. • The “DMZ PC” w ill receive all Unknown connections and data.
78 9.4. Denial of Service (DoS) Denial of Se rvice (Denial of Service) is a type of Internet attac k that se nds a high amount of data to y ou with the intent to overload your Internet connection . Enable the DoS fire wall feature to automaticall y detect and block these DoS attacks.
79 9.5. MAC Filter You can choose whether to Deny or only All ow those computers listed in the MAC Filtering table to access the Internet. MAC Filter Enable MAC f iltering Tic k this box to Enable th e MAC filt ering feature .
80 9.6. IP Filter You can choose whether to Deny or only All ow, computer with those IP Addres ses from accessing c ertain Ports. This can be use d to control which Internet applicati ons the computers c an access. You may need to have certain knowledge of what Internet ports the appli cations use.
81 IP Filter Enable IP filte ring Tick this box to Enable the I P filtering feature. Deny all clie nts with IP add resses listed below to access the network When selec ted, the c omputers w ith IP add resses specified will be Denied ac cess to the indic ated Int ernet ports.
82 9.7. URL Filter You can deny acc ess to certain websites by blocking keywords in the URL web address. For example, “gamer” has been added to the URL B locking Table.
83 10. Advanced The Advanced se ction allows you to configure the Advanced settings of the router. 10.1. N etwork Address Translation (NAT) This page allows you to Enable / Disable the Network Addres s Translati on (NAT) and Network Turbine features. T he NAT is required to share one Internet ac count with multi ple LAN use rs.
84 10.2. Po rt Mapping Port Mapping allows y ou to redirect a particular range of ports to a computer on your LAN network. This helps you host servers be hind the NAT and Firewall.
85 10.3. Po rt Forwarding Port Forwarding allows you to redirect a particular public port to a compute r on your LAN network. This helps y ou host servers behind the NAT and Firewall. In the example be low, there is a WEB Server running on port 80 on the LAN.
86 10.4. Po rt Trigger If you use Internet appli cations which use non-standard connections or port num bers, you may find that they do not function correctly becaus e they are blocked by the Wireless Router's firewall. Port Trigger w ill be required for these applicati ons to work.
87 10.5. Ap plication Layer Gateway (ALG) Certain applications may require the use of ALG feature to function correctly. If you use any of the applications listed, please tick and s elect it to enable this feature.
88 10.6. U niversal Plug and Play (UPnP) The UPnP function allows automatic discovery and configuration of UPnP enabled de vices on your network. It als o provides automatic po rt forwarding for supp orted applications to s eamlessly by pass the Firewall.
89 10.7. Qu ality of Service (QoS) QoS allows you to c ontrol the priority that the data is transmi tted over the Internet, or to reserve a spec ific amount of Internet bandwidth. This is to e nsure that applications get enough Internet bandwidth for a pleasant user experience.
90 Priority Queu e Method Bandwidth priority is set to either H igh or Low. The transmissions in the High queue will be processed first. Unlimited P riority Queue Local IP Add ress The compu ter with this IP Addres s will not be bound by the QoS rules.
91 Bandwidth All ocation Method You can set the maximum amount of bandwidth a certain protocol will use at one time. Or y ou can set a minimu m amount of bandwidth that will be guaranteed to a certain protocol. Bandwidth All ocation Type Set whethe r the QoS ru les app ly to tran smission t hat are D ownload, U ploa d or Both d irections.
92 10.8. Ro uting If your WIRELESS ROUTER de vice is connected a network with diffe rent subnets, then this fe ature will allow the dif ferent subnets to communicate with each other. Static Rou ting Enable Sta tic Routi ng Tick this box to Enable the Stat ic Router feature.
93 Destination Subnet Mask Gateway Hop Interface 192.168.11.0 255.255.255.0 192.168.0.216 1 LAN 192.168.10.0 255.255.255.0 192.168.0.103 1 LAN So if, for exam ple, Client3 wants to send an IP data packet to 192.168.10.2 (Clie nt 2), it would use the above table to determine that it had to go via 192.
94 11. VPN A Virtual Private Network (VPN) provides a secure connection between two or more computers or protected networks over the public Interne t. It provides authentic ation to ensure that th e information is going to and from the correct parties .
95 11.2. Pro file Setting This page allows you to Enable , A dd , Edit and Delete VPN profiles. Profile Setti ng Enable Tick the box to Enable t he VPN pro file. Add Click this button to ad d the entr y. Edit Select one profile and c lick th is button t o edit th e entry.
96 10.1.1. IPSe c IPSec (Internet Protocol Security) is a protocol sui te for securing Internet Protocol (IP) c ommunications by authentic ating and encrypting each IP pac ket of a comm unication session.
97 General Name Enter a nam e for your V PN pol icy. Connection Type Supports IPS ec and L2 TP ove r IPSec met hods to establ ish VPN connec tio n. Authenticatio n Type Supports pre-shared k ey meth od for auth enticat ion. Shared Ke y Enter the Shared Key in b ox.
98 SA (Security Assoc iation) A Security Ass ociation (SA) is the establishment of s hared security attributes between two netw ork entities to support secure comm unication. An SA may include attributes s uch as: cryptographic algorith m and mode; traffi c encryption key; and parameters for the network data to be passed over the connection.
99 Encryption EVR100 support s DES , 3DES , AES128 , AE S192 , A ES256 enc ryption meth od s for traffic through the VPN. Authenticatio n EVR10 0 supports SHA1 , MD5 methods for authe nticati on. Life Time Enter the numb er of sec onds for the IK E Lifetime.
100 Network This page allows you to configure the VPN s erver and local/remote subnet. Network Security Ga teway T ype Security Gatew ay Type s upports I P Add ress and Domain Name . Selec t one of them. Security Ga teway The IP address or domai n name of the V PN server.
101 Advanced This page allows you to configure advanced VPN settings. Advanced NAT Trave rsal E nabling N AT Trave rsal al low IPSec traffic from t his en dpoint to t raverse t hrough the translation proc ess durin g NAT . The remote VPN endpoint must also su pport t his feature and it must be en abled to func tion properly ov er the VP N.
102 10.1.2. L2 TP over IP Sec L2TP over IPSec VPNs enable a business to transport data over the Internet, while still maintaining a high le vel of security to protect data. You ca n use this type of secure connection for small or remote office cli ents that need access to the corporate network.
103 L2TP L2TP Setting Authenticatio n Selec t the d esired authen tication protocol (PA P, CHA P, Auto). Select Auto by default. User Name Enter the usern ame for auth entication .
104 Network Network Server IP Enter the VP N Server IP addre ss. Remote I P Range Assign a rang e of IP ad dresses . The assigne d IP r ange sh ould be on the sam e IP netw ork but not the in the same range as your DHCP IP range.
105 11.3. Wizard You can use W izard to create a VPN profile easily. 1. Click Next button to begin the wizard. 2. Enter the VPN policy name then clic k Next button to next page.
106 3. You can selec t [IPSec] or [L2TP over IPSec] in this page then click Nex t button to next page. If you s elect [IPSec] then go to s tep 3.1. If you select [ L2TP over IPSec] then go to s tep 3.2. 3.1 IPSec You can sele ct [Client to Site] or [Si te to Site] in this page then click Nex t button to next page.
107 Enter the Security Gate way and remote network. Then click Next button to next page..
108 3.2 L2TP over IPSec Enter the username, pa ssword and VPN server IP setting. Then cl ick Next button to next page..
109 4. Enter the shared key for the VPN connection. 5. Setup successfull y, enable this policy i mmediately. If you don’t want enable this policy, you can un-tick the box.
110 How to establish a L2 TP over IPSec VPN con nection on Win dows XP 1. Click Start button and open Cont rol Panel. 2. Click [Network Connections], double click [New Connecti on Wizard] then click Nex t button.
111 3. Select [Connect to the netw ork at my workplace] then click Next button. 4. Select [Virtual Private Network connection] then cl ick Next button.
112 5. Enter the [Company Nam e] then click Next button. 6. Select [Do not dial the initial connection] then click Next button..
113 7. Enter the VPN serve r IP address then click Next button. 8. Select [Do not use my smart card] then clic k Next button..
114 9. Click Finish button to compl ete the wizard. 10. Clic k Properities button..
115 11. In Sec urity, select [Advanced (custom se ttings)] then click Settin gs button. 12. Chec k [Unencrypted pass word (PAP)] and [ Challenge Handshake Authentication Protocol (CHAP)] then cl ick OK button.
116 13. Clic k [IPSec Settings] then tick [Use pre-shared key for authentication], Enter the Key then click OK button. 14. In Networking , selec t [L2TP IPSec VPN] then click OK button.
117 15. Clic k Connect button to connect V PN connection. 16. You can see the VPN Connection has been established ..
118 How to establish a L2 TP over IPSec VPN con nection in Windows 7 1. Click Start button and open Cont rol Panel. 2. Click [View Ne twork Status and Tasks] then [Set up a new c onnection or network].
119 3. Click [Connect to a w orkplace] then [Use my Internet connection (VPN)] 4. Enter the VPN serve r IP address: [ Internet address ], [ Destinat ion name ] and tick [ Don’t connect now; just se t it up so I can connect later], then cli ck the Next button.
120 5. Enter the correct User na me and Password then c lick the Create button. 6. Click the Close button to close the VPN connection se tting..
121 7. Click [Change adapter s ettings] in Step 2, then select VPN Connection and click [Change settings of this connection] 8. Change Type of VPN to [Layer 2 Tunneling Protocol wi th IPSec (L2TP/IPSec)] and che ck [Unencrypted password (PAP)] i n Security.
122 9. Click the Adv anced settings button and select [ Use preshared key for authentication] and e nter the correct key . Then click OK button..
123 10. Double click the VP N Connection then click the Conne ct button. 11. You can see the VPN Connection has been established ..
124 12. Tools This section all ows you to configure some device system settings. 12.1. Adm in This page allows you to change the sys tem password and to configure remote manage ment. Change P assword Old Passw ord: Enter the cu rrent passwo rd. New Passw ord: Enter your new passw ord.
125 12.2. Time This page allows you to set the sys tem time. Time Time Setup : Select th e method you w ant t o set the t ime. Time Zone: Selec t the tim e zone for your current loc ation. NTP Time S erver: Enter the addres s of the Network Ti me Protoc ol (NTP) Server to a utomati call y synchronize with a server on the Internet.
126 12.3. D ynamic DNS (DDNS) This free servic e is very useful when combined with the Virt ual Server feature. It allows Internet users to connect to y our Virtual Servers using a URL, rather than an IP Address . This also solve s the problem of having a dynamic IP address.
127 12.4. Po wer This page allows you to Enable or Disable the wireless LAN power s aving features..
128 12.5. D iagnosis This page allows you determine if the WIRELESS ROUTER devi ce has an active Internet connec tion. Diagnosis Address to Ping: Enter the IP add ress y ou li ke to see i f a successfu l connec tion can b e made. Ping Result: The results of the Ping te st.
129 12.6. F irmware The firmw are (software) in the W IRELESS ROUTER device can be upgraded using your Web Brows er. To perform the Firm ware Upgrade: 1. Click the Browse button and navigate to the location of the upgrade fil e. 2. Select the upgrade fil e.
130 12.7. B ack-up Back-up Restore to f actory default: Restores the device t o factory d efault settin gs. Backup Set tings: Save the cur rent configu ration s ettings to a file. Restore Set tings: Restores a previ ously sa ved configurati on file. Click Brows e to selec t the fil e.
131 12.8. Reset In some circums tances it may be re quired to force the device to reboot..
132 Appendix A – FCC Interferen ce Stat ement Federal Communi cation Commission Inter ference St atemen t This equipment has been tested and found to com ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
133 IMPORTANT NOTE: FCC Radiatio n Expos ure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your bod y.
134 Appendix B – IC Interference Statement Industry Canada state ment: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to th e following two conditions: (1) This.
An important point after buying a device EnGenius Technologies EVR100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought EnGenius Technologies EVR100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EnGenius Technologies EVR100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EnGenius Technologies EVR100 you will learn all the available features of the product, as well as information on its operation. The information that you get EnGenius Technologies EVR100 will certainly help you make a decision on the purchase.
If you already are a holder of EnGenius Technologies EVR100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EnGenius Technologies EVR100.
However, one of the most important roles played by the user manual is to help in solving problems with EnGenius Technologies EVR100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EnGenius Technologies EVR100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
