EnGenius EOR7550 Access Point manual

Summary of contents each page of manual

Page 1

 EO R 7 5 5 0  Dual  Radio  Multi ‐ Function  Rep eate r User ’ s  Manual   V1.
Page 2

i Ta b l e  of  Cont ent   1.  Introduction .............................................................................................................................. ... 1  1.1.  Feat ures ....................................
Page 3

ii 4.4.1.  Enable ................................................................................................................. 49  4.4.2.  DMZ ..............................................................................................
Page 4

iii  Rev i s i o n  His t or y  Ve r s i o n  Date  Note s  1.0  January ,  08,  20 09  Initial  Ve r s i o n  .
Page 5

1 1. Introduction  EOR 75 50  equips  with  two  powerful  independen t  RF  interf aces  which  support  802.11a/b/g  and  802.
Page 6

2 access  set ting.   Manage ment  - Fi r m w a r e  Upgrade  Upgr ading  firm ware  via  web  brow ser ,  setting  are  reser v ed  after  upgra de  - Rese t  &  Backup  Rese t  to  fa c to r y  default.
Page 7

3 (7)  Radio1 Radio2 (8) Radio1 Radio2   a/b/g b/g/n a/b/g b/g/n   AP  CR AP WDS  Bridge   SSID1 SSID2 SSID1 SSID2   LA N  LA N  (9)  Radio1 Radio2 (10) Radio.
Page 8

4 SOHO  users  need  a  cost ‐ effect ive ,  easy  and  quick  inst allation  of  a  small  network.  y  Wi r e l e s s  ext ensions  to  Eth er ne.
Page 9

5 2. Modes   EOR 75 50  provide s  2  separat e  radi o  channels  fo r  wider  service  are a.  Ea ch  of  these  2  rad i o  channels  can  be  conf igu red  as  differ ent  function  mode  separ ately .
Page 10

6 2.2. Client  Bridg e  When  in  Clien t  Bridge,  EOR7 550  wi ll  associat e  with  nearby  AP  and  see s  the  network  device  combination  as  a  st andard  mobi le  unit  (MU).
Page 11

7 3. Under s tanding  the  H a rd wa re  3.1. Hardw are  Ins talla tion  1. Place  the  unit  in  an  appropria te  loca tion  after  conducting  a  sit e  survey .
Page 12

8 4. We b  Configur ation  4.1. Sy ste m  4.1.1. Oper ation  Mode  Yo u  ar e  allowe d  to  confi gure  yo ur  device  into  diff eren t  modes  fo r  differ ent  purposes  (Ple ase  see  Chapter  2 ).
Page 13

9 4.1.2. Sta tus  .
Page 14

10 4.1.3. DHCP    DHCP  Configur ation  Menu  only  shows  when  device  is  in  Clien t  Rou te r  mode.  4.
Page 15

11 4.1.5. Ev e n t  Log  .
Page 16

12 4.1.6. Monitor    .
Page 17

13 4.2. Wi r e l e s s   EOR 75 50  provide s  2  separate  Ra dio  Channel  which  allows  you  configuring  your  device  into  diff erent  separ ate  mode s.  Ea c h  Radio  Channel  can  be  conf igu red  separ at e ly  with  diff eren t  configur ation  menu.
Page 18

14 4.2.1.2. Basic   ¾ Band:  Configure  the  device  into  different  wireless  modes.  9 2.4  GHz  (802.11b/g)  9 5  GHz  (802.
Page 19

15 4.2.1.3. Adva n c ed   ¾ Fragment  Threshold:  Packets  over  the  specified  size  will  be  fragmented  in  order  to  improve  performance  on  noisy  networks.  Specify  a  value  between  256  and  2346.
Page 20

16 ¾ CTS  Protection:  CTS  (Clear  to  Send)  can  be  always  enabled,  auto,  or  disabled.  By  enabled  CTS,  the  Access  Point  and  clients  will  wait  fo r  a  ‘clear’  si gna l  before  transmitting.
Page 21

17 ¾ Encryption:  WEP   ¾ ESSID  Selection :  As  this  device  supports  multiple  SSIDs,  it  is  p ossible  to  configure  a  different  security  mode  for  each  SSID  (profile).
Page 22

18 authentication  encrypts  the  challenge  text  and  sends  it  ba ck  to  the  access  point.  If  the  challenge  text  is  encrypted  correctly,  the  access  point  allows  the  requesting  device  to  authenticate.
Page 23

19 broa dcas t  to  an yone  within  the  ra n ge  of  your  signal.  If  you're  not  using  encryption  then  they  could  connect  to  your  network.
Page 24

20 ¾ Broadcast  SSID :  Selec t  Enable  or  Disable  from  the  drop ‐ down  list.  This  is  the  SSID  broadcast  feature.
Page 25

21 4.2.1.6. Client  Lis t   4.2.1.7. VL AN    Only  Avai l a bl e  in  AP  mode  ¾ Virtual  LAN :  Choose  to  Enable  or  Disable  the  VLAN  features.  ¾ SSID1  Tag :  Spec ify  the  VLAN  tag.
Page 26

22 4.2.1.8. WMM   4.2.1.9. Po we r  Saving    Only  Avai l a bl e  fo r  Radio  2  .
Page 27

23 4.2.2. Client  Bridge  4.2.2.1. St at us   4.2.2.2. Basic   ¾ Radio:  To  enable/disable  radio  channel  ¾ Band:  Configure  the  device  into  different  wireless  modes.  9 2.4  GHz  (802.
Page 28

24 ¾ Site  Survey  Click  on  the  Site  Survey  but ton  to  view  a  list  of  Access  Poi nt s  in  the  area.  The  Sit e  Survey  page  display s  information  about  device s  within  the  802.
Page 29

25 ¾ Beacon  Period :  Beacons  are  packets  sent  by  a  wireless  Access  Point  to  synchronize  wireless  devices.  Specify  a  Beacon  Period  value  between  20  and  1024.  The  default  value  is  set  to  100  milliseconds.
Page 30

26 4.2.2.5. WMM  .
Page 31

27 4.2.3. Client  Ro u t e r  4.2.3.1. St at us   4.2.3.2. Basic   ¾ Band:  Configure  the  device  into  different  wireless  modes.  9 2.4  GHz  (802.11b/g)  9 5  GHz  (802.11a)  9 2.4  GHz  (802.
Page 32

28 ¾ Site  Survey  Click  on  the  Site  Survey  but ton  to  view  a  list  of  Access  Poi nt s  in  the  area.  The  Sit e  Survey  page  display s  information  about  device s  within  the  802.
Page 33

29 ¾ Preamble  Type:  Select  a  short  or  long  preamble.  For  optimum  performance  it  is  recommended  to  also  configure  the  client  device  as  the  same  preamble  type.
Page 34

30 4.2.4. WDS  Bridge   Yo u  can  only  connect  to  the  device  via  Wi r e l e s s  Client  4.2.4.1. St at us   4.2.4.2. Basic   ¾ Band:  Configure  the  device  into  different  wireless  modes.
Page 35

31 9 2.4  GHz  (802.11g)  ¾ Channel:  Channel  selection.  This  will  vary  based  on  selected  Band.  ¾ MAC  address  1~4:  Specify  up  to  4  MAC  address  of  the  device.
Page 36

32 4.2.4.3. Adva n c ed   ¾ Fragment  Threshold:  Packets  over  the  specified  size  will  be  fragmented  in  order  to  improve  performance  on  noisy  networks.  Specify  a  value  between  256  and  2346.
Page 37

33 ¾ CTS  Protection:  CTS  (Clear  to  Send)  can  be  always  enabled,  auto,  or  disabled.  By  enabled  CTS,  the  Access  Point  and  clients  will  wait  fo r  a  ‘clear’  si gna l  before  transmitting.
Page 38

34 ¾ Band:  Configure  the  device  into  different  wireless  modes.  9 2.4  GHz  (802.11b/g)  9 5  GHz  (802.11a)  9 2.4  GHz  (802.11b)  9 2.4  GHz  (802.11g)  ¾ Channel:  Channel  selection.
Page 39

35 ¾ Default  Tx  Key :  You  may  choose  one  of  your  4  different  WEP  keys  from  below.  ¾ Encryption  Key  1 ‐ 4:  You  may  enter  four  different  WEP  keys.   4.
Page 40

36 ¾ Preamble  Type:  Select  a  short  or  long  pr eamble.  For  optimum  performance  it  is  recommended  to  also  configure  the  client  device  as  the  same  preamble  type.
Page 41

37 9 2.4  GHz  (802.11b)  9 2.4  GHz  (802.11g)  ¾ Enabled  SSID#:  The  device  allows  you  to  add  up  to  4  unique  SSID  ¾ ESSID#:  Description  of  each  configured  SSID  Channel:  Channel  selection.
Page 42

38 ¾ Data  rate:  You  may  select  a  data  rate  from  the  drop ‐ down  list,  however,  it  is  recommended  to  select  auto .  This  is  also  known  as  auto ‐ fallback.
Page 43

39 ¾ Encryption:  WEP   ¾ ESSID  Selection :  As  this  device  supports  multiple  SSIDs,  it  is  p ossible  to  configure  a  different  security  mode  for  each  SSID  (profile).
Page 44

40 authentication  encrypts  the  challenge  text  and  sends  it  ba ck  to  the  access  point.  If  the  challenge  text  is  encrypted  correctly,  the  access  point  allows  the  requesting  device  to  authenticate.
Page 45

41 they  could  connect  to  your  network.  When  this  is  disabled,  you  must  enter  the  Wireless  Network  Name  (SSID)  on  the  client  manually  to  connect  to  the  network.
Page 46

42 ¾ Broadcast  SSID :  Selec t  Enable  or  Disable  from  the  drop ‐ down  list.  This  is  the  SSID  broadcast  feature.
Page 47

43 4.2.6.6. Client  Lis t   4.2.6.7. WMM  .
Page 48

44 4.2.7. Univer sal  Re p eate r  (ST A)  4.2.7.1. St at us   4.2.7.2. Basic   ¾ Band:  Configure  the  device  into  different  wireless  modes.  9 2.4  GHz  (802.11b/g)  9 5  GHz  (802.11a)  9 2.
Page 49

45 ¾ Site  Survey  Click  on  the  Site  Survey  button  to  view  a  list  of  A ccess  Poi n ts  in  the  area.  The  Site  Sur vey  pa ge  display s  information  about  devices  within  the  802.
Page 50

46 ¾ Preamble  Type:  Select  a  short  or  long  preamble.  For  optimum  performance  it  is  recommended  to  also  configure  the  client  device  as  the  same  preamble  type.
Page 51

47 4.3. Netw ork  4.3.1. Sta tus   4.3.2. LA N   ¾ Bridge  Type:  Select  Static  IP  or  Dynamic  IP  from  the  drop ‐ down  list.  If  you  select  Static  IP,  you  will  be  required  to  specify  an  IP  address  and  subnet  mask.
Page 52

48 4.3.3. WA N    Only  shows  when  device  is  in  WA N  Int erface  ¾ Login  Method:  Configure  different  connection  methods  with  WAN.
Page 53

49 4.4. Fi r e w a l l   Only  shows  when  device  is  in  AP  or  CR  modes  with  WA N  Interf ace  enabled.
Page 54

50 4.4.4. MA C  Fi l t e r   4.4.5. IP  Fi l t e r  .
Page 55

51 ¾ Description:  Description  of  IP  Filtering  item  ¾ Protocol:  Type  of  Protoc ols  9 Both  9 TCP  9 UDP  ¾ Local  IP  Address:  Local  IP  address  range  ¾ Remote  port  range:  Remote  port  number  rang e  4.
Page 56

52 4.5. Ad va n c ed  4.5.1. NA T  This  allows  you  to  enable/disable  NA T  service  of  the  device.   4.5.2. Por t  Mapping   ¾ Description:  Description  of  Port  Mapping  item.
Page 57

53 ¾ Protocol:  Protocol  type.   9 Both  9 TCP  9 UDP  ¾ Remote  Port  Range:  Source  Port  number  to  be  mapped.  4.5.3. Por t  Fo rwar ding   ¾ Description:  Description  of  Port  Forwarding  item.
Page 58

54 4.5.4. Por t  Tr i g g e r i n g  .
Page 59

55 4.5.5. AL G   4.5.6. UPnP  .
Page 60

56 4.5.7. QoS   ¾ Priority  Queue  .
Page 61

57  ¾ Bandwidth  Alloca tion   ¾ Type:  Type  of  traffics  to  be  monitored.  9 Download  9 Upload  9 Both  ¾ Local  IP  range:  Destination  IP  Range.   ¾ Protocol:  Protocol  type  to  be  monitored.
Page 62

58 9 FTP  ¾ Remote  port  range:  Source  Port  Number  range  ¾ Policy:  The  policy  rules  for  QoS  service.   9 Min  9 Max  ¾ Rate(bps):  9 FULL  9 32M  9 13M  9 8M  9 4M  9 2M  9 1M  9 512K  9 256K  9 128K  4.
Page 63

59 4.5.9. Dynamic  R outing   4.5.10. R outing  T able  Prov iding  an  over view  of  current  Rout i n g  ta bl e. .
Page 64

60 4.6. M a n age m ent  4.6.1. Adm i n  Change  current  login  password  of  the  device.  It  is  recommended  to  change  the  default  password  for  security  reasons.    4.6.2.
Page 65

61  ¾ SNMP  Active :  Choose  to  enable  or  disable  the  SNMP  feature.  ¾ SNMP  Version :  You  may  select  a  specific  version  or  select  All  from  the  drop ‐ down  list.
Page 66

62  　   Ensure  that  you  hav e  downloa ded  the  appr opriate  firmwar e  from  the  vendor ’ s  websi te.
Page 67

63     .
Page 68

64 4.7. T ools  4.7.1. Ti m e  Set ting  This  feature  allows  you  to  configure,  update,  and  maintain  the  correct  time  on  the  device’s  internal  system  clock  as  well  as  configure  the  time  zone.
Page 69

65  ¾ Dynamic  DNS:  To  enable/disable  the  DDNS  service  ¾ Server  Address:  List  of  DDNS  Service  providers  9 3322  9 DHS  9 DynDNS  9 .
Page 70

66   .
Page 71

67 4.8. Logout  Logout  will  let  user  leav e  the  GUI.    .
Page 72

68 Appendix  A  –  SPECIFICATIONS  Hard wa re  Specification  MCU  Ralink  RT28 80  RF  Ath e ro s  AR5 414  (Radio1)  +  Ralink  RT2 820  (Radio2) �.
Page 73

69 IEEE802.11a  25dBm@36Mb ps  23dBm@48M bps  21dBm@54M bps  IEEE802.11a  25dBm@36Mb ps  23dBm@48M bps  21dBm@54M bps  5.725~5.825  GHz  IEEE802.11a  27dBm@6~24Mbps  25dBm@36Mbps  23dBm@48M bps  21dBm@54M bps  5.
Page 74

70 RFC  2865,2866  RADIUS  Opera tion  Mode  18  mo des   EOR7 55 0  Radio1(11a/b/ g)  Radio2  (11 /b/g/n)  AP  CB  CR  WDS  Bridge  WDS  Repea.
Page 75

71 14  117  243  13 0  270  15  130  270  144.4  300   ‐ Distan ce  Contr ol  (802.1x  Ack  timeout)  fo r  Radio 2  ‐ Signal  Stre ngth  indi cation  usi ng  LEDs  ‐ Bandwidth  Selection  Security  Authentica tion:  ‐ 802.
Page 76

72 Appendix  B  –  FCC  INTERFERENCE  STATEMENT  Fede ral  Communication  Commission  In terfer ence  Sta tem ent   This  equipment  has  been  test e.
Page 77

73      .

Read the EnGenius EOR7550 manual - avoid problems

An important point after buying a device EnGenius EOR7550 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product EnGenius EOR7550
to know what to do in case of failure EnGenius EOR7550

If you have not bought EnGenius EOR7550 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data EnGenius EOR7550 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, EnGenius EOR7550 you will learn all the available features of the product, as well as information on its operation. The information that you get EnGenius EOR7550 will certainly help you make a decision on the purchase.

If you already are a holder of EnGenius EOR7550, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime EnGenius EOR7550.

However, one of the most important roles played by the user manual is to help in solving problems with EnGenius EOR7550. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device EnGenius EOR7550 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

EnGenius EOR7550 manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Page 61

Page 62

Page 63

Page 64

Page 65

Page 66

Page 67

Page 68

Page 69

Page 70

Page 71

Page 72

Page 73

Page 74